Pages:
Author

Topic: Open-Case mining rigs exposed to short circuit threats from spiders! (Read 2765 times)

newbie
Activity: 33
Merit: 0
If a spider could live in the hideous vacuum and temperatures inside my cases, I'd feel obliged to let it stay there.
newbie
Activity: 56
Merit: 0
If you're really *that* concerned... get some cheap screen and 1x1 wood moulding at the hardware store and make a screened box to put over your rig.  It's probably $5-$10 in materials for one rig.

+1 This is the best solution for peace of mind / cost.
sr. member
Activity: 278
Merit: 250
If you're really *that* concerned... get some cheap screen and 1x1 wood moulding at the hardware store and make a screened box to put over your rig.  It's probably $5-$10 in materials for one rig.
hero member
Activity: 481
Merit: 502
Actually I moved my rigs into the garage and two days later one of my rigs is off in the morning. It wouldn't post. I take it apart to find a moth stuck on the pins on the underside. Board is being sent back to be rma'd now. Hopefully warranty will take care of it...

Ouch man.
This confirms my fears! I've got mine cased up now. There's still quite a few gaps but hopefully it's well enough protected. I need a USB bug zapper..
full member
Activity: 133
Merit: 100
Actually I moved my rigs into the garage and two days later one of my rigs is off in the morning. It wouldn't post. I take it apart to find a moth stuck on the pins on the underside. Board is being sent back to be rma'd now. Hopefully warranty will take care of it...
hero member
Activity: 504
Merit: 504
Decent Programmer to boot!
And that's why there are bugs in the programming
legendary
Activity: 1029
Merit: 1000
Also, I know someone's going to eventually say it

In the old days when debugging meant literally removing the remains of dead bugs from circuits, computers were much much higher voltage/current machines... touching the wrong thing could give you a shock (well, technically speaking if you touched the power supply or monitor (on the inside) you could receive a shock)

Smiley
Debuging, YEAH...
Then it was in the hardware, now it is in the software...
So dont't worry about spiders, they don't have a chance with a 2000 RPM fan... Even my finger don't had a chance Wink
legendary
Activity: 1876
Merit: 1000

I have 7 of my rigs out in the shed,  I have been bug 'zapping' all summer Smiley
legendary
Activity: 1190
Merit: 1000
We have nothing to fear, but fear itself and spiders.
hero member
Activity: 481
Merit: 502
Thanks for the various responses. Sure makes an interesting read.
hero member
Activity: 711
Merit: 500
Dust > spiders

Let's tall about handling that with open air cases instead lol
sr. member
Activity: 437
Merit: 250
Also, I know someone's going to eventually say it

In the old days when debugging meant literally removing the remains of dead bugs from circuits, computers were much much higher voltage/current machines... touching the wrong thing could give you a shock (well, technically speaking if you touched the power supply or monitor (on the inside) you could receive a shock)
newbie
Activity: 56
Merit: 0
This sounds stupid, but after moving my open-case mining rig from my room into the garage/basement, I started thinking about whether it was a bad idea since there's quite a few spiders lurking in there which could possibly (albeit highly unlikely) cause a short circuit.

Now obviously putting the case on would be a fantastic start at preventing this ridiculous problem, but what are your thoughts on this?
I say extremely likely.  Warmth and lights from your computer will be extremely attractive to creepy crawlies.  A fire in your garage can go for hours before being noticed.

Very nice, sent you .05BTC for the laugh.
hero member
Activity: 602
Merit: 500
You have to think about what they would short as well, you need to be specific in circuit diagrams. Computers are typically designed in a way such that it is difficult to create shorts between parts, and most living things are not great conductors anyway. More likely to have damage caused from spider webs gumming up fans or piles of spider bodies blocking your fans exhaust. Stupid spiders.
sr. member
Activity: 437
Merit: 250
With the voltages involved it's unlikely they could cause a short
full member
Activity: 210
Merit: 100
I have some spiders around mine, plus some moths which have clearly gone through the boxfans.  Not sure how many have been through the GPU fans.
donator
Activity: 1731
Merit: 1008
I wish a spider could do a few webs in my PCs, last there was 4 long leg flies stuck in my ref. ATI turbine fan.
hero member
Activity: 504
Merit: 500
Spiders taste with their feet. If one foot is on peanut butter and the other is on chocolate they think they are standing on reeses pieces... Wink But they hate anything citris...

http://www.squidoo.com/Safe-Natural-Spider-Repellent
hero member
Activity: 481
Merit: 502
Definitely not infested but there's the average amount lurking around in there.

It does seem incredibly unlikely. There's not much airflow since it's only 1 rig. Just two case fans and the CPU/GPU/PSU fans (it's a half open case, rather than caseless). Probably nothing to worry about but I'd rather not have my house burned down by spiders.
sr. member
Activity: 388
Merit: 250
non issue. I've got a couple open "cases" running in the garage, and haven't had any issue. There have been a few dead bugs on them, but just blow them off and keep on going, no outages due to them yet.
Pages:
Jump to: