Open Source XPM Pool + GPU Miner (aka. madPrimeMiner) - page 17.

LongAndShort

legendary

Activity: 1078

Merit: 1050

Quote from: pavimus on May 14, 2014, 03:29:58 AM

Extremal, can you please explain, which version of kernel.bin we should use till difficulty hit 11, 10ch or 11ch?

Mined only about 2.8 xpm in 13 hours with previous 11ch version ~1.16 cpd (~18.25cpd on new 10ch version) with previous 11ch version. this is normal?

I thought he was pretty clear he said "I'm not going to predict what is better" but for the pool the 10ch is because the 11ch will yeild less 10ch (meaning the pool wont pay as much cause you will mainly be going after 11ch meaning you will be going for blocks and not any kind of chain in between)
*holds you hand* use the 10ch

I can vouch cause i'm using the 11ch for a small pool of mine and it yeilds 8 and 9 chain almost like normal but goes after 11ch more then 10ch so there is very little 10ch but i found a block which counted as a 11ch
by the way im using 290x and the 10ch kernal proved very little improvement about .25cpd per card over the last kernal ex made

pavimus

member

Activity: 103

Merit: 10

Extremal, can you please explain, which version of kernel.bin we should use till difficulty hit 11, 10ch or 11ch?

Mined only about 2.8 xpm in 13 hours with previous 11ch version ~1.16 cpd (~18.25cpd on new 10ch version) with previous 11ch version. this is normal?

B.T.Coin

sr. member

Activity: 332

Merit: 250

Quote from: aikklond on May 14, 2014, 02:49:42 AM

so how much is the minimum payout in external's pool?

First payout is at 1XPM so you can quickly verify that payouts work (after 2 days of maturing the blocks).
After that payouts will be every 11 XPM.

aikklond

legendary

Activity: 1148

Merit: 1000

Quote from: B.T.Coin on May 14, 2014, 02:33:29 AM

Quote from: aikklond on May 14, 2014, 02:19:39 AM

at which pool are you guys mining?

which folders from the patch do I copy on madprimeminer? 10ch and GPU?

copy the kernel.bin file from either the 10ch or 11ch folder over the one in your miner folder.
You can send eXtremal a PM to ask for access to his private pool (5% fee) or you can compile the pool yourself from the opensource code.

There will be a cold day in hell before I compile this... Grin

so how much is the minimum payout in external's pool?

B.T.Coin

sr. member

Activity: 332

Merit: 250

Quote from: aikklond on May 14, 2014, 02:19:39 AM

at which pool are you guys mining?

which folders from the patch do I copy on madprimeminer? 10ch and GPU?

copy the kernel.bin file from either the 10ch or 11ch folder over the one in your miner folder.
You can send eXtremal a PM to ask for access to his private pool (5% fee) or you can compile the pool yourself from the opensource code.

aikklond

legendary

Activity: 1148

Merit: 1000

at which pool are you guys mining?

which folders from the patch do I copy on madprimeminer? 10ch and GPU?

LongAndShort

legendary

Activity: 1078

Merit: 1050

Quote from: eXtremal on May 13, 2014, 06:10:41 PM

New patch: https://www.dropbox.com/s/brco83jy9g7mnkx/patch_11_v2.tar.gz (More optimized Fermat test, used 352-bit operations instead of 384-bit)
10ch version, 3xRadeon R9 290X 1040/1250:

Quote from: vlad777 on May 13, 2014, 03:32:22 PM

Are the 10-chains found by the new 11-chain way utilized?

Yes, 11ch version also produces 10ch shares, but less than original version.

Awesome nice work can you put a donation addy in your sig please

eXtremal

sr. member

Activity: 2106

Merit: 282

👉bit.ly/3QXp3oh | 🔥 Ultimate Launc

New patch: https://www.dropbox.com/s/brco83jy9g7mnkx/patch_11_v2.tar.gz (More optimized Fermat test, used 352-bit operations instead of 384-bit)
10ch version, 3xRadeon R9 290X 1040/1250:

Quote from: vlad777 on May 13, 2014, 03:32:22 PM

Are the 10-chains found by the new 11-chain way utilized?

Yes, 11ch version also produces 10ch shares, but less than original version.

vlad777

newbie

Activity: 2

Merit: 0

Quote from: eXtremal on May 13, 2014, 01:57:12 PM

Quote from: ozzy1926 on May 13, 2014, 01:47:10 PM

pool now says, 1.19cpd with3x290 is that normal?

Yes, now it's normal, 3xRadeon 290X give 1,33cpd.
Now, with current difficulty each 17-18 10-number chain is block, miner searches 11-number chains only 15 times slower.

Are the 10-chains found by the new 11-chain way utilized?

Samuray

sr. member

Activity: 291

Merit: 250

Thanks!

ivanlabrie

hero member

Activity: 812

Merit: 1000

Nvidia is a whole different animal, asking that in this thread makes no sense...

Go to peercoin forums, there's an nvidia miner there, but linux only. Optimized for 750 ti too.

Samuray

sr. member

Activity: 291

Merit: 250

Are you going to test Nvidia allso ?? If yes when?

Thanks!

eXtremal

sr. member

Activity: 2106

Merit: 282

👉bit.ly/3QXp3oh | 🔥 Ultimate Launc

Quote from: ozzy1926 on May 13, 2014, 01:47:10 PM

pool now says, 1.19cpd with3x290 is that normal?

Yes, now it's normal, 3xRadeon 290X give 1,33cpd.
Now, with current difficulty each 17-18 10-number chain is block, miner searches 11-number chains only 15 times slower.

Quote from: Samuray on May 13, 2014, 01:48:41 PM

Hello! what about Nvidia ? Is there a win7 miner ? I have 4 gtx 750 Ti. Can i mine som XPM with those?? Thanks!

NVidia not supported now, sorry.

Samuray

sr. member

Activity: 291

Merit: 250

Hello! what about Nvidia ? Is there a win7 miner ? I have 4 gtx 750 Ti. Can i mine som XPM with those?? Thanks!

ozzy1926

sr. member

Activity: 378

Merit: 250

Quote from: eXtremal on May 13, 2014, 01:34:51 PM

Quote from: incognitoworker on May 13, 2014, 01:22:14 PM

How to use this patch?
And is there a different kernel or other for 290 compared to 280x?
Didnt get my 290`s running.

Replace kernel.bin, its same for all AMD GPU's.
Catalyst 14.x required.

Quote from: B.T.Coin on May 13, 2014, 01:15:09 PM

Is anybody working on improving MadMax his code even further to get the same performance as claymore?

I'll try to optimize miner in next 7 days (I already know two optimizations, need time to implement and debug).

pool now says, 1.19cpd with3x290 is that normal?

eXtremal

sr. member

Activity: 2106

Merit: 282

👉bit.ly/3QXp3oh | 🔥 Ultimate Launc

Quote from: incognitoworker on May 13, 2014, 01:22:14 PM

How to use this patch?
And is there a different kernel or other for 290 compared to 280x?
Didnt get my 290`s running.

Replace kernel.bin, its same for all AMD GPU's.
Catalyst 14.x required.

Quote from: B.T.Coin on May 13, 2014, 01:15:09 PM

Is anybody working on improving MadMax his code even further to get the same performance as claymore?

I'll try to optimize miner in next 7 days (I already know two optimizations, need time to implement and debug).

incognitoworker

hero member

Activity: 736

Merit: 500

Quote from: eXtremal on May 13, 2014, 01:06:12 PM

Pool can be unstable now, moving to shares 9ch-11ch from 8ch-10ch.

Quote from: SpeedDemon13 on May 13, 2014, 06:35:08 AM

Did you compile an improve version of the madMAx miner? If yes, is it solo and/or pool?

Yes, download standard MadMax miner and patch https://www.dropbox.com/s/ukfszdh4y17ndkr/xpmminer_patch.tar.gz

How to use this patch?
And is there a different kernel or other for 290 compared to 280x?
Didnt get my 290`s running.

B.T.Coin

sr. member

Activity: 332

Merit: 250

Quote from: eXtremal on May 13, 2014, 01:06:12 PM

Pool can be unstable now, moving to shares 9ch-11ch from 8ch-10ch.

Quote from: SpeedDemon13 on May 13, 2014, 06:35:08 AM

Did you compile an improve version of the madMAx miner? If yes, is it solo and/or pool?

Yes, download standard MadMax miner and patch https://www.dropbox.com/s/ukfszdh4y17ndkr/xpmminer_patch.tar.gz

Is anybody working on improving MadMax his code even further to get the same performance as claymore?

eXtremal

sr. member

Activity: 2106

Merit: 282

👉bit.ly/3QXp3oh | 🔥 Ultimate Launc

Pool can be unstable now, moving to shares 9ch-11ch from 8ch-10ch.

Quote from: SpeedDemon13 on May 13, 2014, 06:35:08 AM

Did you compile an improve version of the madMAx miner? If yes, is it solo and/or pool?

Yes, download standard MadMax miner and patch

Patch for miner with target 11ch: (Fermat test patch included). Current results:

Quote

[GPU 0] T=-1C A=-1% E=0 primes=0.101868 fermat=410633/sec cpd=0.43/day
[GPU 1] T=-1C A=-1% E=0 primes=0.102032 fermat=413339/sec cpd=0.45/day
[GPU 2] T=-1C A=-1% E=0 primes=0.101829 fermat=412303/sec cpd=0.43/day

SpeedDemon13

hero member

Activity: 518

Merit: 500

Quote from: eXtremal on May 12, 2014, 07:37:40 AM

Quote from: ozzy1926 on May 12, 2014, 07:28:16 AM

overclocking cards helps more cpd?

Yes, my 3xRadeon R9 290X @ 1040/1250MHz (memory overclocking has no effect unlike scrypt mining):

Quote from: ozzy1926 on May 12, 2014, 07:28:16 AM

also it says balance:1.6xpm requested:1xpm. Whats that requested xpm mean?

1 xpm ready to payout.. payouts starts after two days mining.

Quote from: Supercomputing on May 12, 2014, 07:16:06 AM

Yes, the modular exponentiation code that was released with this miner is a good start for others to use, but very slow.

I'm wrong about 400% (miner shows 500-600k Fermat tests per second, but miner do some other work, not only Fermat tests

), really 100-120%.

Did you compile an improve version of the madMAx miner? If yes, is it solo and/or pool?

Topic: Open Source XPM Pool + GPU Miner (aka. madPrimeMiner) - page 17. (Read 63469 times)