2014-05-13 03:00:36 dumpaddr thread start
2014-05-13 03:00:36 GenerateBitcoins(1)
2014-05-13 03:00:36 PoolServer started.
2014-05-13 03:00:36 PoolBackend started.
2014-05-13 03:07:08
[2014-May-13 10:56:09.183632] 2518 - [info] "config: reading Wt config file: /etc/wt/wt_config.xml (location = './webserver')"
[2014-May-13 10:56:09.183999] 2518 - [info] "WServer/wthttp: initializing built-in wthttpd"
[2014-May-13 10:56:09.184168] 2518 - [info] "wthttp: started server: http://192.168.0.102:80"
[2014-May-13 10:56:20.851730] 2518 - [info] "Wt: session created (#sessions = 1)"
primecoin server and webserver run ok， but client can't connect, please help . thanks
Topic: Open Source XPM Pool + GPU Miner (aka. madPrimeMiner) - page 18. (Read 63452 times)
u dont need more than 8 connections to find a block u can find a block with 1 i would check to makes sure your internet is ok first then restart router maker sure your primecoin conf is set to server and u have ports open for the client
Guys I've tried claymores solo with approximate power of 68 CPD. Still no blocks found after 5 hours. I have 8 active connections. Am I doing something wrong?
You need more than 8 connections, its all in readme file, read it.
So, guys, how can i solo with this miner? Cant see any releases... Help appreciated.
Guys I've tried claymores solo with approximate power of 68 CPD. Still no blocks found after 5 hours. I have 8 active connections. Am I doing something wrong?
You can not find a single block for 23 hours and then find 24 block for 1 hour. It all depends on your luck =)
good job, I will give a try with my a few cards
Guys I've tried claymores solo with approximate power of 68 CPD. Still no blocks found after 5 hours. I have 8 active connections. Am I doing something wrong?
im using claymore solo mining, good results 5.20 CPD per card R9 280x
what clocks are you running at? 
im using claymore solo mining, good results 5.20 CPD per card R9 280x even with 10% discount which is appox. 4.68 CPD which is greater than 4.30 CPD from extreme version plus -5% which makes 4.08 CPD per card
So in conclusion:
Extreme version: 4.08 CPD (discount 5% fee included)
Claymore v8 solo: 4.68 CPD (discount 10% fee included)
So in conclusion:
Extreme version: 4.08 CPD (discount 5% fee included)
Claymore v8 solo: 4.68 CPD (discount 10% fee included)
claymores miner is using jhprimeminer code plus whatever also u dont have to mine with ypool i have been mining solo just fine with claymores and primegpu hitting many blocks daily
Im getting this error running with just rpcuer= and rpcpassword in conf..it runs and syncs when i don't use the -gen argument but i get this when i use the -gen argument
Can anyone lend me a hand i tip well
some issue,need helpCode:
************************
EXCEPTION: N2Wt3Dbo7backend17PostgresExceptionE
Could not connect to: FATAL: password authentication failed for user "backend"
FATAL: password authentication failed for user "backend"
primecoin in AppInit()
Can anyone lend me a hand i tip well
It looks to me like the database or user rights for Postgres DB not set up properly?
Had to CREATE ROLE in postgresql...farout blocks are flying through on the network now and diff is climbing faster then i've seen it since 6-7
what about
claymore's solo vs mad eXtermal?
people are talking goods about solo v8 claymore
claymore's solo vs mad eXtermal?
people are talking goods about solo v8 claymore
Claymore's solo still takes 10% of your earnings.
This is funny. A totally superior miner is released that makes all others look ridiculous. Next thing you know, it's open sourced, then the authors of the slow miners grab the code, make their miners as fast if not faster and keep themselves in business. They were supposed to go out of business...
right now the fastest solo version have Claymore which implemented part of madmax code onto his GPU miner. Achieving 5.28 with R9 280x
4 blocks per day with 6 x R9 280x
In the meanwhile the owner of beeeeer is working to allow madmax to mine on his pool, im still in conversation with him. Stay tune
4 blocks per day with 6 x R9 280x
In the meanwhile the owner of beeeeer is working to allow madmax to mine on his pool, im still in conversation with him. Stay tune
so what is better?
claymores miner with ypool or mad miner with eXtremal?
I think you are better off using MadMiner with eXtremal.
Even if Claymore is a bit faster (which I don't know for sure), he is taking a 10% fee and Ypool also takes their fee.
eXtremal charges 5% right now, so that makes quite a difference.
On top of that I think Claymore does not deserve his 10% when he is using Max his code, so it's better not to support him.
what about
claymore's solo vs mad eXtermal?
people are talking goods about solo v8 claymore
Quote from: gilad215
so what is better?
This, much lower cpu load, almost the same speed, open source.This miner gives me a higher net.
right now the fastest solo version have Claymore which implemented part of madmax code onto his GPU miner. Achieving 5.28 with R9 280x
4 blocks per day with 6 x R9 280x
In the meanwhile the owner of beeeeer is working to allow madmax to mine on his pool, im still in conversation with him. Stay tune
4 blocks per day with 6 x R9 280x
In the meanwhile the owner of beeeeer is working to allow madmax to mine on his pool, im still in conversation with him. Stay tune
so what is better?
claymores miner with ypool or mad miner with eXtremal?
I think you are better off using MadMiner with eXtremal.
Even if Claymore is a bit faster (which I don't know for sure), he is taking a 10% fee and Ypool also takes their fee.
eXtremal charges 5% right now, so that makes quite a difference.
On top of that I think Claymore does not deserve his 10% when he is using Max his code, so it's better not to support him.
Quote from: gilad215
so what is better?
This, much lower cpu load, almost the same speed, open source. right now the fastest solo version have Claymore which implemented part of madmax code onto his GPU miner. Achieving 5.28 with R9 280x
4 blocks per day with 6 x R9 280x
In the meanwhile the owner of beeeeer is working to allow madmax to mine on his pool, im still in conversation with him. Stay tune
4 blocks per day with 6 x R9 280x
In the meanwhile the owner of beeeeer is working to allow madmax to mine on his pool, im still in conversation with him. Stay tune
so what is better?
claymores miner with ypool or mad miner with eXtremal?
right now the fastest solo version have Claymore which implemented part of madmax code onto his GPU miner. Achieving 5.28 with R9 280x
4 blocks per day with 6 x R9 280x
In the meanwhile the owner of beeeeer is working to allow madmax to mine on his pool, im still in conversation with him. Stay tune
4 blocks per day with 6 x R9 280x
In the meanwhile the owner of beeeeer is working to allow madmax to mine on his pool, im still in conversation with him. Stay tune
which driver should i use to get more cpd 13.12-14.3 or 14.4 with 290 cards?
Yesterday was Mother's Day-very busy with family, but I was able to find about 15 minutes to convert the Pool Sever into a Solo Pool Server (with no webserver or database support).
Benchmark results (Solo Pool Server Mode)
Benchmark duration: 60 minutes
GPU used: SAPPHIRE DUAL-X R9 280X 3GB GDDR5 OC
http://www.sapphiretech.com/presentation/product/product_index.aspx?pid=2022&lid=1
Modular Exponentiation: Used eXtremal's patch
[GPU 0] T=-1C A=-1% E=0 primes=0.098621 fermat=499649/sec cpd=3.76/day
(ST/INV/DUP): 152x 7ch(0/0/0) 15x 8ch(0/0/0) 1x 9ch(0/0/0)
GPU 0 found share: 8-ch type 3
Share accepted.
Work received: height=538045 diff=10.918976 latency=0ms
GPU 0 found share: 7-ch type 1
Share accepted.
GPU 0 found share: 7-ch type 3
Share accepted.
GPU 0 found share: 8-ch type 3
Share accepted.
GPU 0 found share: 7-ch type 1
Share accepted.
GPU 0 found share: 7-ch type 1
Share accepted.
[GPU 0] T=-1C A=-1% E=0 primes=0.098627 fermat=500023/sec cpd=3.76/day
(ST/INV/DUP): 156x 7ch(0/0/0) 17x 8ch(0/0/0) 1x 9ch(0/0/0)
Conclusion: The sieve code is very fast, but the modular exponentiation code needs some improvement. Should be able to achieve an estimated 5 CPD with a faster modular exponentiation implementation on an R9 280X (GTX 580 - 4.2 CPD)
Happy belated Mother's Day and Happy Mining!
Benchmark results (Solo Pool Server Mode)
Benchmark duration: 60 minutes
GPU used: SAPPHIRE DUAL-X R9 280X 3GB GDDR5 OC
http://www.sapphiretech.com/presentation/product/product_index.aspx?pid=2022&lid=1
Modular Exponentiation: Used eXtremal's patch
[GPU 0] T=-1C A=-1% E=0 primes=0.098621 fermat=499649/sec cpd=3.76/day
(ST/INV/DUP): 152x 7ch(0/0/0) 15x 8ch(0/0/0) 1x 9ch(0/0/0)
GPU 0 found share: 8-ch type 3
Share accepted.
Work received: height=538045 diff=10.918976 latency=0ms
GPU 0 found share: 7-ch type 1
Share accepted.
GPU 0 found share: 7-ch type 3
Share accepted.
GPU 0 found share: 8-ch type 3
Share accepted.
GPU 0 found share: 7-ch type 1
Share accepted.
GPU 0 found share: 7-ch type 1
Share accepted.
[GPU 0] T=-1C A=-1% E=0 primes=0.098627 fermat=500023/sec cpd=3.76/day
(ST/INV/DUP): 156x 7ch(0/0/0) 17x 8ch(0/0/0) 1x 9ch(0/0/0)
Conclusion: The sieve code is very fast, but the modular exponentiation code needs some improvement. Should be able to achieve an estimated 5 CPD with a faster modular exponentiation implementation on an R9 280X (GTX 580 - 4.2 CPD)
Happy belated Mother's Day and Happy Mining!
Jump to: