[OS] nvOC easy-to-use Linux Nvidia Mining - page 13.

LuKePicci

jr. member

Activity: 128

Merit: 1

Quote from: fk2 on September 07, 2018, 04:02:01 PM

any chance for current 2.1 beta rigs to update to the latest 18.04 release with dual cuda support by remote/without imaging?

Nope, if you really need dual_cuda support and you can't reimage right now, you could try installing the other cuda-9-2 runtime manually (use cuda distribution specific packages, never cuda runfiles), but you have to be very careful because it could mess with nvidia drivers and get you unable to boot or recover remotely.

fk2

jr. member

Activity: 67

Merit: 2

any chance for current 2.1 beta rigs to update to the latest 18.04 release with dual cuda support by remote/without imaging?

papampi_2

jr. member

Activity: 112

Merit: 3

Linux Forever... Resistance is futile!!!

Quote from: ?? on ??

Can somebody hlep me with OhGodAnETHlargementPill? How to run it on nvOC?

Just set it to yes in 1bash

Code:

OhGodAnETHlargementPill="NO"

change to:

Code:

OhGodAnETHlargementPill="YES"

papampi_2

jr. member

Activity: 112

Merit: 3

Linux Forever... Resistance is futile!!!

Done.
New link added, hopefully all is good now.

koody

member

Activity: 114

Merit: 20

ok, thanks.

papampi_2

jr. member

Activity: 112

Merit: 3

Linux Forever... Resistance is futile!!!

Quote from: koody on September 06, 2018, 11:35:52 AM

New version

Many thanks papampi_2!!!

There was a problem in image first boot, fixed, uploading again

koody

member

Activity: 114

Merit: 20

New version

Many thanks papampi_2!!!

papampi_2

jr. member

Activity: 112

Merit: 3

Linux Forever... Resistance is futile!!!

nvOC_19-2.1 beta Ubuntu 18.04 Dual-Cuda Nvidia 396 2018-09-07

- Ubuntu 18.04.1 with latest updates and patches
- Dual Cuda support with Cuda 9.2 and 8 pre installed
- Disabled ubuntu splash screen to show kernel message
- All the latest miners
- bminer dual mining support
- CryptoDredge miner
- New Hot temp shutdown
- Fix bugs in WTM Switcher
- New Coins and Algos
- Bug fixes
- So many new additions and improvements.

- With so many changes, its recommended to use new 1bash.
- Recompile miners may have some problems due to changes in ubuntu 18.04.
- Telegram not working due to Ubuntu 18.04 moved to libcurl4, but many miners depend on libcurl3

As always extract the compressed file, flash your SSD/USB with the extracted img file
Open small fat partition and read the README
Download latest 1bash.template
Edit 1bash.template and save it as 1bash

Notice: Do NOT remove 1bash.template from /NVOC/mining, copy and rename new one if needed

Edit firstboot.json to enable/disable auto_expand. ("true" or "false")
recompile miners on first boot ("false" for no recompile, "A" for all, The letter/number associated to each recompilable miner depends on the latest nvOC_miner_update.sh script you find in the nvOC_miners repository on GitHub)
Auto recompile may take long time to download and recompile all miners.

On first boot, firstboot gnome-terminal profile will expand partition to full size, after reboot it will add latest nvOC and miners from GitHub repo.
firstboot gnome-terminal will stop and open mining gnome-terminal profile.
May reboot again if xorg.conf needs update.

Mega download link

Gdrive download link

Image size: 12.5 Gb
Zip size: 3.5 Gb
(Due to bigger image size we used 7z with ultra compression to keep download size at 3.5 Gb)

sha256:

Code:

nvOC_19-2.1_U18.04_Dual-Cuda_N396_2018-09-07.img:
27090E4CF4C4928619AFE456995870F9FAC0996F7876B7791898BD18F2B21D00

nvOC_19-2.1_U18.04_Dual-Cuda_N396_2018-09-05.7z
2384B639142123F13D9E8BAE834F248A293F4F7142B05D5CBF55FBE2DBCB6903

papampi_2

jr. member

Activity: 112

Merit: 3

Linux Forever... Resistance is futile!!!

Latest commits merged to 19-2.1 beta release point.

Please update, test and let us know if there are any problems.

papampi_2

jr. member

Activity: 112

Merit: 3

Linux Forever... Resistance is futile!!!

papampi_2

jr. member

Activity: 112

Merit: 3

Linux Forever... Resistance is futile!!!

Quote from: rooihond on September 04, 2018, 07:08:17 AM

But I get the errors from nvOC line 899: and line 907: ((: 0038: value too great for base (error token is "0038") when I manually run nvOC upgrade.

That's fixed in last commit, will be merge to release soon.

fk2

jr. member

Activity: 67

Merit: 2

@papampi: I am so sorry but I totally forgot to let you know that adding the protocol line to 1bash worked. unfortunately I didn't test bminer but ethminer worked. I will have a try when I'm back from work

ATM I'd like to mine X16R but I am not able to. I selected SUPRminer and ZENEMYminer. I wondered if these may need cuda9 in order to work?! Whats really sad: GPUs are idling but master-log I saw the message that everything is ok, even though nothing happens so rig was idling some hours.

Code:

Operating System info:
Kernel : 4.4.0-97-generic
OS : Ubuntu 16.04.3 LTS
System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4)
nvidia driver : 396.45

nvOC info:
nvOC path : /home/m1/NVOC/testing
nvOC : 0019-2.1
Report : 0012
1bash : 0037
1bash.template:
3main : 0025
5watchdog : 0022
6tempcontrol : 0007
wtm switch : 0023
wtm profit : 0004
pool switch : 0002
minerinfo : 0010

Hardware info:
Motherboard : ASUS STRIX Z270F GAMING Rev 1.xx
BIOS ver. : 1203 12/26/2017
CPU Model : Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores : 2 (Cores + Threads)
Mem Total : 3984516 kB
Mem Free : 2232088 kB
Swap Total : 0 kB
Swap Free : 0 kB
Ethernet : Intel I219-V

CUDA SDK version
nvcc path : /usr/local/cuda-8.0/bin/nvcc
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2016 NVIDIA Corporation
Built on Tue_Jan_10_13:22:03_CST_2017
Cuda compilation tools, release 8.0, V8.0.61

nvOC is not installed as a service

HDD and Partion info:
NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT
sda 55.9G disk 0 0 sata ATA Patriot Flare 21.1
├─sda1 9M vfat part 0 0
├─sda2 51.9G ext4 part 0 0 /
└─sda3 4G swap part 0 0

VGA info:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b80 (rev a1)

Local git branch and submodules status:
## 19-2.1...origin/19-2.1
D 1bash.template
M telegram
+fbd5012d64be9e27703ccc766770f6ea5a50bf29 miners (remotes/origin/19-2.1)
## HEAD (no branch)
cd6fab68823e247bb84dd1fa0448d5f75ec4917d ANXccminer/src (heads/master)
aafe2d19b6d9eb07d942d70ced3049e9aed1c241 ASccminer/src (1.5.3-tpruvot-81-gaafe2d1)
31865e0b846ad98e2ce99aeb9b28bb51d3be22db KTccminer-cryptonight/src (2.06)
c5ab73837c8024f1e6b8fe7ad46e6881fb8366e6 KTccminer/src (1.4.6-tpruvot-1293-gc5ab738)
7d41d49b92db27b9ab80270adaa92f6b06d1ef78 KXccminer/src (0.1)
78dad7dd659eae72a07d2448de62b1946c1f2b41 MSFTccminer/src (2.2.5-rvn)
8affcb9cd09edd917d33c1ed450f23400f571bdb NAccminer/src (v2.2-mod-r2)
9e86bdd24ed7911b698f1d0ef61a4028fcbd13c5 SPccminer/src (1.5.81)
c800f1a803e1b2074ed2a7c15023c096d0772048 SUPRminer/src (1.5)
a81ab0f7a557a12a21d716dd03537bc8633fd176 TPccminer/src (2.2.5-tpruvot)
bfd1c002f98f2d63f2174618838afc28cf4ffffe cpuOPT/src (v3.8.8.1)
48b170a5828256600ca71e66d4c114af4e114236 vertminer/src (v1.0-beta.2)
c0ab1734332d6472225d8ac7394f6fcba71aabc9 xmr-stak/src (2.4.4)

1bash settings:
1bash version .............: 0037
LOCAL or REMOTE ...........: REMOTE
TEAMVIEWER started ........: NO
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO

Watchdog ..................: YES
SYSRQ Reboot ..............: NO
Watchdog Cycle ............: 15
GPU Utilization Threshold .: 70
Alternate Pool ............: NO

Temp Control ..............: YES
MANUAL_FAN ................: NO
TARGET_TEMP ...............: 65
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 85
MINIMAL_FAN_SPEED .........: 50
MAXIMAL_FAN_SPEED .........: 95

CLEAR_LOGS_ON_BOOT ........: NO
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO

TELEGRAM_MESSAGES .: YES
TELEGRAM_ALERTS ...: NO
TELEGRAM_TYPE .............: fk1
TELEGRAM_TIMEOUT_IN_MINUTES: 60
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN

HEADLESS MODE:.............: NO
GPUPowerMizerMode_Adjust...: NO
ETH Pill ..................: YES

POWERLIMIT MODE ...........: GPU_SPECIFIC
GPU0 Power Limit ..........: 160
GPU1 Power Limit ..........: 160
GPU2 Power Limit ..........: 160
GPU3 Power Limit ..........: 120
OVERCLOCK MODE ............: GPU_SPECIFIC
GPU0 Core Overclock ........: 120
GPU0 Memory Overclock ......: 1100
GPU1 Core Overclock ........: 120
GPU1 Memory Overclock ......: 1100
GPU2 Core Overclock ........: 120
GPU2 Memory Overclock ......: 1100
GPU3 Core Overclock ........: 80
GPU3 Memory Overclock ......: 1700

GLOBAL WORKERNAME .........: YES
AUTO WORKERNAME ...........: CUSTOM
WORKERNAME ................: AnyMine02
plusCPU ...................: NO

AUTO_SWITCH ...............: WTM_SWITCHING
WTM_AUTO_SWITCH_COINS .....: ETH;ETC;EXP;ZCL;MUSIC;ZEN;MONA;FTC;VTC;NICE_ETHASH;NICE_LYRA2REV2
WTM_AUTO_SWITCH_URL .......: https://whattomine.com/coins.json?utf8=✓&adapt_q_
COIN ......................: NICE_ETHASH
ALGO ......................: ETHASH
MINER .....................: ETHMINER
NICE_ETHASH WORKER ................: AnyMine02
NICE_ETHASH ADDRESS ...............: ...
NICE_ETHASH POOL ..................: daggerhashimoto.eu.nicehash.com
NICE_ETHASH PORT ..................: 3353

rooihond

newbie

Activity: 7

Merit: 0

Quote from: papampi_2 on September 04, 2018, 03:10:08 AM

Quote from: rooihond on September 02, 2018, 03:38:36 AM

Quote from: papampi_2 on August 30, 2018, 01:48:36 AM

Quote from: Rev123 on August 29, 2018, 12:23:55 PM

Quote from: papampi_2 on August 26, 2018, 04:32:56 PM

Quote from: Rev123 on August 26, 2018, 07:01:27 AM

Hello.
Where I can download the latest version?
I download the nvOC_V19-2.1beta_U16.04_N390_D180707 (for nvOC >= 2.1), but here is no miner for equihash 144,5 and 1bash is for old version.
Also the update doesn't work.

Both bminer and new ewbf are capable of mining new equihash algos, and both available in 19-2.1
What do you mean by the update doesnt work?

In the process of updating there was an error that I did not have time to read.
Then, at the start of the terminal, the following was issued:
"There is something wrong with your 1bash settings file, nvOC can't start. Check if it exist or contains errors. SSH access is now being enabled to let you debug. This program will restart in a minure."
Also I find 1bash and there I turn on TeamViewer, but after restart terminal it still did not work.

As you can read your 1bash is corrupted or missing.
You should make a copy of 1bash.template and edit it so the latest changes takes effect.

Code:

cp ~/NVOC/mining/1bash.template ~/NVOC/mining/1bash

To edit from ssh:

Code:

nano ~/NVOC/mining/1bash

or if on local or teamviewer:

Code:

gedit ~/NVOC/mining/1bash

Hi Rev123,
Just got same symptom and error message after doing nvoc upgrade, tried copying back original 1bash.template, still getting errors. Will mess around a bit more and see.

Update
I think the problem might be a missing end-quotes in the line v0038=... the version changes section towards the top of 1bash. Fixed it for me.

Should be fixed in latest bug fix,
Please update and let us know.

Hi papampi,

I did a quick test,
- fresh image of nvOC_V19-2.1beta_U16.04_N390_D180707 to test rig
- made no changes to 1bash, just let it boot up and do its update thing - OK
- mining OK

But I get the errors from nvOC line 899: and line 907: ((: 0038: value too great for base (error token is "0038") when I manually run nvOC upgrade.

papampi_2

jr. member

Activity: 112

Merit: 3

Linux Forever... Resistance is futile!!!

Quote from: rooihond on September 02, 2018, 03:38:36 AM

Quote from: papampi_2 on August 30, 2018, 01:48:36 AM

Quote from: Rev123 on August 29, 2018, 12:23:55 PM

Quote from: papampi_2 on August 26, 2018, 04:32:56 PM

Quote from: Rev123 on August 26, 2018, 07:01:27 AM

Hello.
Where I can download the latest version?
I download the nvOC_V19-2.1beta_U16.04_N390_D180707 (for nvOC >= 2.1), but here is no miner for equihash 144,5 and 1bash is for old version.
Also the update doesn't work.

Both bminer and new ewbf are capable of mining new equihash algos, and both available in 19-2.1
What do you mean by the update doesnt work?

In the process of updating there was an error that I did not have time to read.
Then, at the start of the terminal, the following was issued:
"There is something wrong with your 1bash settings file, nvOC can't start. Check if it exist or contains errors. SSH access is now being enabled to let you debug. This program will restart in a minure."
Also I find 1bash and there I turn on TeamViewer, but after restart terminal it still did not work.

As you can read your 1bash is corrupted or missing.
You should make a copy of 1bash.template and edit it so the latest changes takes effect.

Code:

cp ~/NVOC/mining/1bash.template ~/NVOC/mining/1bash

To edit from ssh:

Code:

nano ~/NVOC/mining/1bash

or if on local or teamviewer:

Code:

gedit ~/NVOC/mining/1bash

Hi Rev123,
Just got same symptom and error message after doing nvoc upgrade, tried copying back original 1bash.template, still getting errors. Will mess around a bit more and see.

Update
I think the problem might be a missing end-quotes in the line v0038=... the version changes section towards the top of 1bash. Fixed it for me.

Should be fixed in latest bug fix,
Please update and let us know.

rooihond

newbie

Activity: 7

Merit: 0

Quote from: papampi_2 on August 30, 2018, 01:48:36 AM

Quote from: Rev123 on August 29, 2018, 12:23:55 PM

Quote from: papampi_2 on August 26, 2018, 04:32:56 PM

Quote from: Rev123 on August 26, 2018, 07:01:27 AM

Hello.
Where I can download the latest version?
I download the nvOC_V19-2.1beta_U16.04_N390_D180707 (for nvOC >= 2.1), but here is no miner for equihash 144,5 and 1bash is for old version.
Also the update doesn't work.

Both bminer and new ewbf are capable of mining new equihash algos, and both available in 19-2.1
What do you mean by the update doesnt work?

In the process of updating there was an error that I did not have time to read.
Then, at the start of the terminal, the following was issued:
"There is something wrong with your 1bash settings file, nvOC can't start. Check if it exist or contains errors. SSH access is now being enabled to let you debug. This program will restart in a minure."
Also I find 1bash and there I turn on TeamViewer, but after restart terminal it still did not work.

As you can read your 1bash is corrupted or missing.
You should make a copy of 1bash.template and edit it so the latest changes takes effect.

Code:

cp ~/NVOC/mining/1bash.template ~/NVOC/mining/1bash

To edit from ssh:

Code:

nano ~/NVOC/mining/1bash

or if on local or teamviewer:

Code:

gedit ~/NVOC/mining/1bash

Hi Rev123,
Just got same symptom and error message after doing nvoc upgrade, tried copying back original 1bash.template, still getting errors. Will mess around a bit more and see.

Update
I think the problem might be a missing end-quotes in the line v0038=... the version changes section towards the top of 1bash. Fixed it for me.

thaelin

newbie

Activity: 64

Merit: 0

I recently had a machine of 5 GTX1050 TI cards take a dump and then never come back.
Said something like couldn't write DAG file. These are 4 Gig cards so should still be able to
run. I even tried the newer 2.0 with same results.

Are these cards even workable now? Due to the upcoming dif bomb in Oct, figure I want
to egg out all I can get from the systems before all breaks. Will have to see what's left
after it and the proposed hard fork.

thanks thay

papampi_2

jr. member

Activity: 112

Merit: 3

Linux Forever... Resistance is futile!!!

Quote from: Rev123 on August 29, 2018, 12:23:55 PM

Quote from: papampi_2 on August 26, 2018, 04:32:56 PM

Quote from: Rev123 on August 26, 2018, 07:01:27 AM

Hello.
Where I can download the latest version?
I download the nvOC_V19-2.1beta_U16.04_N390_D180707 (for nvOC >= 2.1), but here is no miner for equihash 144,5 and 1bash is for old version.
Also the update doesn't work.

Both bminer and new ewbf are capable of mining new equihash algos, and both available in 19-2.1
What do you mean by the update doesnt work?

In the process of updating there was an error that I did not have time to read.
Then, at the start of the terminal, the following was issued:
"There is something wrong with your 1bash settings file, nvOC can't start. Check if it exist or contains errors. SSH access is now being enabled to let you debug. This program will restart in a minure."
Also I find 1bash and there I turn on TeamViewer, but after restart terminal it still did not work.

As you can read your 1bash is corrupted or missing.
You should make a copy of 1bash.template and edit it so the latest changes takes effect.

Code:

cp ~/NVOC/mining/1bash.template ~/NVOC/mining/1bash

To edit from ssh:

Code:

nano ~/NVOC/mining/1bash

or if on local or teamviewer:

Code:

gedit ~/NVOC/mining/1bash

Rev123

newbie

Activity: 14

Merit: 0

Quote from: papampi_2 on August 26, 2018, 04:32:56 PM

Quote from: Rev123 on August 26, 2018, 07:01:27 AM

Hello.
Where I can download the latest version?
I download the nvOC_V19-2.1beta_U16.04_N390_D180707 (for nvOC >= 2.1), but here is no miner for equihash 144,5 and 1bash is for old version.
Also the update doesn't work.

Both bminer and new ewbf are capable of mining new equihash algos, and both available in 19-2.1
What do you mean by the update doesnt work?

In the process of updating there was an error that I did not have time to read.
Then, at the start of the terminal, the following was issued:
"There is something wrong with your 1bash settings file, nvOC can't start. Check if it exist or contains errors. SSH access is now being enabled to let you debug. This program will restart in a minure."
Also I find 1bash and there I turn on TeamViewer, but after restart terminal it still did not work.

papampi_2

jr. member

Activity: 112

Merit: 3

Linux Forever... Resistance is futile!!!

Quote from: Rev123 on August 26, 2018, 07:01:27 AM

Hello.
Where I can download the latest version?
I download the nvOC_V19-2.1beta_U16.04_N390_D180707 (for nvOC >= 2.1), but here is no miner for equihash 144,5 and 1bash is for old version.
Also the update doesn't work.

Both bminer and new ewbf are capable of mining new equihash algos, and both available in 19-2.1
What do you mean by the update doesnt work?

Rev123

newbie

Activity: 14

Merit: 0

Hello.
Where I can download the latest version?
I download the nvOC_V19-2.1beta_U16.04_N390_D180707 (for nvOC >= 2.1), but here is no miner for equihash 144,5 and 1bash is for old version.
Also the update doesn't work.

Topic: [OS] nvOC easy-to-use Linux Nvidia Mining - page 13. (Read 417958 times)