Pages:
Author

Topic: [OS] nvOC easy-to-use Linux Nvidia Mining - page 3. (Read 418247 times)

sr. member
Activity: 419
Merit: 255
February 05, 2019, 05:31:11 PM


Add algo MTP  fix Zcoin

Done.

1bash.template

But asking nicely would be more appreciated.
I know it maybe a lost in translation but its never late to learn how to be polite.


Add MTP algo 0miner.
## Various Algos $ALGO == MTP ||


He mean 'polite' ...

As in ASK and not TELL him to - and be COURTEOUS when ASKING.

'Could you please add xxx Algo? Thanks Smiley'

Something like that would suffice, as politely asking is better than abruptly telling. You get more help that way Wink

#crysx

I do not know english.
google translate but this is happening.
legendary
Activity: 2912
Merit: 1091
--- ChainWorks Industries ---
February 05, 2019, 03:18:20 PM


Add algo MTP  fix Zcoin

Done.

1bash.template

But asking nicely would be more appreciated.
I know it maybe a lost in translation but its never late to learn how to be polite.


Add MTP algo 0miner.
## Various Algos $ALGO == MTP ||


He mean 'polite' ...

As in ASK and not TELL him to - and be COURTEOUS when ASKING.

'Could you please add xxx Algo? Thanks Smiley'

Something like that would suffice, as politely asking is better than abruptly telling. You get more help that way Wink

#crysx
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
February 03, 2019, 04:08:32 PM
Maybe try to restore xorg via nvOC command see how it goes

Code:
bash ~/NVOC/mining/nvOC restore-xorg

It may reboot 2 times after run the command, which is normal.

Still no change after doing that, and it looks like it did do it successfully.


I'm out of ideas
Try to flash the image again, maybe the internal GPU messed up something.

I'm going re-flash it tomorrow, One thing is strange. It looks like the bios is not saving the setting for the Primary Display option, it always defaults to Auto when i change it to PCIE from integrated graphics.

So maybe that's why it was so cheap

Is the bios updated to latest firmware?
Update it to latest, reset to default, save, reboot, set again.



Going to do some testing later, it was bought from a big and reputable store here so that cheap price shouldn't be the issue  Wink, and i have another one which i can use too


Good luck mate
Hope you figure it out soon and get it to mining.
full member
Activity: 223
Merit: 101
February 03, 2019, 04:05:48 PM
Maybe try to restore xorg via nvOC command see how it goes

Code:
bash ~/NVOC/mining/nvOC restore-xorg

It may reboot 2 times after run the command, which is normal.

Still no change after doing that, and it looks like it did do it successfully.


I'm out of ideas
Try to flash the image again, maybe the internal GPU messed up something.

I'm going re-flash it tomorrow, One thing is strange. It looks like the bios is not saving the setting for the Primary Display option, it always defaults to Auto when i change it to PCIE from integrated graphics.

So maybe that's why it was so cheap

Is the bios updated to latest firmware?
Update it to latest, reset to default, save, reboot, set again.



Going to do some testing later, it was bought from a big and reputable store here so that cheap price shouldn't be the issue  Wink, and i have another one which i can use too
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
February 03, 2019, 03:58:44 PM
Maybe try to restore xorg via nvOC command see how it goes

Code:
bash ~/NVOC/mining/nvOC restore-xorg

It may reboot 2 times after run the command, which is normal.

Still no change after doing that, and it looks like it did do it successfully.


I'm out of ideas
Try to flash the image again, maybe the internal GPU messed up something.

I'm going re-flash it tomorrow, One thing is strange. It looks like the bios is not saving the setting for the Primary Display option, it always defaults to Auto when i change it to PCIE from integrated graphics.

So maybe that's why it was so cheap

Is the bios updated to latest firmware?
Update it to latest, reset to default, save, reboot, set again.

full member
Activity: 223
Merit: 101
February 03, 2019, 03:45:02 PM
Maybe try to restore xorg via nvOC command see how it goes

Code:
bash ~/NVOC/mining/nvOC restore-xorg

It may reboot 2 times after run the command, which is normal.

Still no change after doing that, and it looks like it did do it successfully.


I'm out of ideas
Try to flash the image again, maybe the internal GPU messed up something.

I'm going re-flash it tomorrow, One thing is strange. It looks like the bios is not saving the setting for the Primary Display option, it always defaults to Auto when i change it to PCIE from integrated graphics.
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
February 03, 2019, 02:07:09 PM
Maybe try to restore xorg via nvOC command see how it goes

Code:
bash ~/NVOC/mining/nvOC restore-xorg

It may reboot 2 times after run the command, which is normal.

Still no change after doing that, and it looks like it did do it successfully.


I'm out of ideas
Try to flash the image again, maybe the internal GPU messed up something.
full member
Activity: 223
Merit: 101
February 03, 2019, 01:35:58 PM
Maybe try to restore xorg via nvOC command see how it goes

Code:
bash ~/NVOC/mining/nvOC restore-xorg

It may reboot 2 times after run the command, which is normal.

Still no change after doing that, and it looks like it did do it successfully.
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
February 03, 2019, 01:16:12 PM
Maybe try to restore xorg via nvOC command see how it goes

Code:
bash ~/NVOC/mining/nvOC restore-xorg

It may reboot 2 times after run the command, which is normal.
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
February 03, 2019, 01:13:26 PM
Hi, i need some advice regarding my problems with a new rig.

Today i set up a new rig with ASUS B250 mining expert(was only 25€ new!) and first time using mining cards; 5x ASUS Mining P104-100 cards to be exact(were dirt cheap as well).

The problem is that GPU fan control doesn't work at all(manual or temp control) so they're going pretty much full blast while temps are in the 40c's and 50c's.

also when starting the rig, i end up in a restart loop with the error:
"Xorg Problem Detected

Restoring Xorg

Restore default xorg.conf
Rebooting in 5 seconds"

I'm not sure if these issues are related but i assume so since i found an earlier post in this thread with an similar issue
https://bitcointalksearch.org/topic/m.27727923

Here are some screenshots: https://imgur.com/a/8CvAvol

I'm using the newest version from Github(19_30)

Any help would be appreciated, Thanks guys  Smiley.

Have you disabled internal GPU in bios?
Also since you have p104 cards it's better to enable headless mode in 1bash.


I have not done those things, i'll try them, Will i still be able to use teamviewer with it?

Yup you can also set TeamViewer resolution if you like.

Ok, i did those changes, now it isn't restarting anymore which is good but i still can't control the fans, not even manually through Nvidia X Server like i can my other "normal" rigs.

Which version of ubuntu image you used?
Is it 16.04 or 18.04?

I have 16.04.


16.04 is more stable.

As I noted in GitHub 18.04 has some conflicts with tempcontrol that we couldnt solve yet.
full member
Activity: 223
Merit: 101
February 03, 2019, 01:12:10 PM
Hi, i need some advice regarding my problems with a new rig.

Today i set up a new rig with ASUS B250 mining expert(was only 25€ new!) and first time using mining cards; 5x ASUS Mining P104-100 cards to be exact(were dirt cheap as well).

The problem is that GPU fan control doesn't work at all(manual or temp control) so they're going pretty much full blast while temps are in the 40c's and 50c's.

also when starting the rig, i end up in a restart loop with the error:
"Xorg Problem Detected

Restoring Xorg

Restore default xorg.conf
Rebooting in 5 seconds"

I'm not sure if these issues are related but i assume so since i found an earlier post in this thread with an similar issue
https://bitcointalksearch.org/topic/m.27727923

Here are some screenshots: https://imgur.com/a/8CvAvol

I'm using the newest version from Github(19_30)

Any help would be appreciated, Thanks guys  Smiley.

Have you disabled internal GPU in bios?
Also since you have p104 cards it's better to enable headless mode in 1bash.


I have not done those things, i'll try them, Will i still be able to use teamviewer with it?

Yup you can also set TeamViewer resolution if you like.

Ok, i did those changes, now it isn't restarting anymore which is good but i still can't control the fans, not even manually through Nvidia X Server like i can my other "normal" rigs.

Which version of ubuntu image you used?
Is it 16.04 or 18.04?

I have 16.04.

Would 18.04 be better?
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
February 03, 2019, 01:08:52 PM
Hi, i need some advice regarding my problems with a new rig.

Today i set up a new rig with ASUS B250 mining expert(was only 25€ new!) and first time using mining cards; 5x ASUS Mining P104-100 cards to be exact(were dirt cheap as well).

The problem is that GPU fan control doesn't work at all(manual or temp control) so they're going pretty much full blast while temps are in the 40c's and 50c's.

also when starting the rig, i end up in a restart loop with the error:
"Xorg Problem Detected

Restoring Xorg

Restore default xorg.conf
Rebooting in 5 seconds"

I'm not sure if these issues are related but i assume so since i found an earlier post in this thread with an similar issue
https://bitcointalksearch.org/topic/m.27727923

Here are some screenshots: https://imgur.com/a/8CvAvol

I'm using the newest version from Github(19_30)

Any help would be appreciated, Thanks guys  Smiley.

Have you disabled internal GPU in bios?
Also since you have p104 cards it's better to enable headless mode in 1bash.


I have not done those things, i'll try them, Will i still be able to use teamviewer with it?

Yup you can also set TeamViewer resolution if you like.

Ok, i did those changes, now it isn't restarting anymore which is good but i still can't control the fans, not even manually through Nvidia X Server like i can my other "normal" rigs.

Which version of ubuntu image you used?
Is it 16.04 or 18.04?
full member
Activity: 223
Merit: 101
February 03, 2019, 01:04:51 PM
Hi, i need some advice regarding my problems with a new rig.

Today i set up a new rig with ASUS B250 mining expert(was only 25€ new!) and first time using mining cards; 5x ASUS Mining P104-100 cards to be exact(were dirt cheap as well).

The problem is that GPU fan control doesn't work at all(manual or temp control) so they're going pretty much full blast while temps are in the 40c's and 50c's.

also when starting the rig, i end up in a restart loop with the error:
"Xorg Problem Detected

Restoring Xorg

Restore default xorg.conf
Rebooting in 5 seconds"

I'm not sure if these issues are related but i assume so since i found an earlier post in this thread with an similar issue
https://bitcointalksearch.org/topic/m.27727923

Here are some screenshots: https://imgur.com/a/8CvAvol

I'm using the newest version from Github(19_30)

Any help would be appreciated, Thanks guys  Smiley.

Have you disabled internal GPU in bios?
Also since you have p104 cards it's better to enable headless mode in 1bash.


I have not done those things, i'll try them, Will i still be able to use teamviewer with it?

Yup you can also set TeamViewer resolution if you like.

Ok, i did those changes, now it isn't restarting anymore which is good but i still can't control the fans, not even manually through Nvidia X Server like i can my other "normal" rigs.
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
February 03, 2019, 12:33:34 PM
Hi, i need some advice regarding my problems with a new rig.

Today i set up a new rig with ASUS B250 mining expert(was only 25€ new!) and first time using mining cards; 5x ASUS Mining P104-100 cards to be exact(were dirt cheap as well).

The problem is that GPU fan control doesn't work at all(manual or temp control) so they're going pretty much full blast while temps are in the 40c's and 50c's.

also when starting the rig, i end up in a restart loop with the error:
"Xorg Problem Detected

Restoring Xorg

Restore default xorg.conf
Rebooting in 5 seconds"

I'm not sure if these issues are related but i assume so since i found an earlier post in this thread with an similar issue
https://bitcointalksearch.org/topic/m.27727923

Here are some screenshots: https://imgur.com/a/8CvAvol

I'm using the newest version from Github(19_30)

Any help would be appreciated, Thanks guys  Smiley.

Have you disabled internal GPU in bios?
Also since you have p104 cards it's better to enable headless mode in 1bash.


I have not done those things, i'll try them, Will i still be able to use teamviewer with it?

Yup you can also set TeamViewer resolution if you like.
full member
Activity: 223
Merit: 101
February 03, 2019, 12:31:55 PM
Hi, i need some advice regarding my problems with a new rig.

Today i set up a new rig with ASUS B250 mining expert(was only 25€ new!) and first time using mining cards; 5x ASUS Mining P104-100 cards to be exact(were dirt cheap as well).

The problem is that GPU fan control doesn't work at all(manual or temp control) so they're going pretty much full blast while temps are in the 40c's and 50c's.

also when starting the rig, i end up in a restart loop with the error:
"Xorg Problem Detected

Restoring Xorg

Restore default xorg.conf
Rebooting in 5 seconds"

I'm not sure if these issues are related but i assume so since i found an earlier post in this thread with an similar issue
https://bitcointalksearch.org/topic/m.27727923

Here are some screenshots: https://imgur.com/a/8CvAvol

I'm using the newest version from Github(19_30)

Any help would be appreciated, Thanks guys  Smiley.

Have you disabled internal GPU in bios?
Also since you have p104 cards it's better to enable headless mode in 1bash.


I have not done those things, i'll try them, Will i still be able to use teamviewer normally with it?
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
February 03, 2019, 12:14:51 PM
Hi, i need some advice regarding my problems with a new rig.

Today i set up a new rig with ASUS B250 mining expert(was only 25€ new!) and first time using mining cards; 5x ASUS Mining P104-100 cards to be exact(were dirt cheap as well).

The problem is that GPU fan control doesn't work at all(manual or temp control) so they're going pretty much full blast while temps are in the 40c's and 50c's.

also when starting the rig, i end up in a restart loop with the error:
"Xorg Problem Detected

Restoring Xorg

Restore default xorg.conf
Rebooting in 5 seconds"

I'm not sure if these issues are related but i assume so since i found an earlier post in this thread with an similar issue
https://bitcointalksearch.org/topic/m.27727923

Here are some screenshots: https://imgur.com/a/8CvAvol

I'm using the newest version from Github(19_30)

Any help would be appreciated, Thanks guys  Smiley.

Have you disabled internal GPU in bios?
Also since you have p104 cards it's better to enable headless mode in 1bash.
full member
Activity: 223
Merit: 101
February 03, 2019, 12:10:12 PM
Hi, i need some advice regarding my problems with a new rig.

Today i set up a new rig with ASUS B250 mining expert(was only 25€ new!) and first time using mining cards; 5x ASUS Mining P104-100 cards to be exact(were dirt cheap as well).

The problem is that GPU fan control doesn't work at all(manual or temp control) so they're going pretty much full blast while temps are in the 40c's and 50c's.

also when starting the rig, i end up in a restart loop with the error:
"Xorg Problem Detected

Restoring Xorg

Restore default xorg.conf
Rebooting in 5 seconds"

I'm not sure if these issues are related but i assume so since i found an earlier post in this thread with an similar issue
https://bitcointalksearch.org/topic/m.27727923

Here are some screenshots: https://imgur.com/a/8CvAvol

I'm using the newest version from Github(19_30)

Any help would be appreciated, Thanks guys  Smiley.
sr. member
Activity: 419
Merit: 255
February 03, 2019, 06:32:26 AM


Add algo MTP  fix Zcoin

Done.

1bash.template

But asking nicely would be more appreciated.
I know it maybe a lost in translation but its never late to learn how to be polite.


Add MTP algo 0miner.
## Various Algos $ALGO == MTP ||
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
February 03, 2019, 05:11:48 AM


Add algo MTP  fix Zcoin

Done.

1bash.template

But asking nicely would be more appreciated.
I know it maybe a lost in translation but its never late to learn how to be polite.
sr. member
Activity: 419
Merit: 255
February 03, 2019, 04:33:45 AM
Updated nvOC 3.0-stable Gminer to 1.25 with Cuckaroo29 and Cuckoo support.

Updated  1bash.template and 0miner to support Grincoin (GRIN) and Aeternity (AE).

Update your nvOC with:
Code:
bash ~/NVOC/mining/nvoc upgrade

Edit and add new arguments from 1bash.template to your 1bash. (Changes shown in the link above)

Please let us know if there was any problems here or in GitHub issues

Add algo MTP  fix Zcoin
Pages:
Jump to: