Please someone tell me why gminer consuming my celeron g3900 at 90%??
Win10/12 p104gpus/8gb ram/128gb ssd
Win10/12 p104gpus/8gb ram/128gb ssd
Possibly share or dag verification. If you can turn them off and see if it reduces cpu load.
Topic: GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex (Read 307129 times)
Possibly share or dag verification. If you can turn them off and see if it reduces cpu load.
Please someone tell me why gminer consuming my celeron g3900 at 90%??
Win10/12 p104gpus/8gb ram/128gb ssd
Win10/12 p104gpus/8gb ram/128gb ssd
6%? Greedy! That's why I never use Gminer.
About DERO:
Hiveos Config Image:
https://i.imgur.com/UOVbaY3.png
ERROR:
14:15:58 Connected to community-pools.mysrv.cloud:10300 [167.235.7.72]
14:15:58 Connection Error: Connection closed
I can mine DERO with astronv miner at this pool.
is there any special settings for gminer ?
Hiveos Config Image:
https://i.imgur.com/UOVbaY3.png
ERROR:
14:15:58 Connected to community-pools.mysrv.cloud:10300 [167.235.7.72]
14:15:58 Connection Error: Connection closed
I can mine DERO with astronv miner at this pool.
is there any special settings for gminer ?
gminer v3.44
--pl from -50 to 200
Why ?
I want to use --pl for RTX3090 with 330W. But it gives error.
I think --pl in gminer as percent not W.
is it possible to set power limit as watt ?
IMAGE:
https://i.imgur.com/6A6YgDP.png
I use this command (--lock_cclock 1050 --cclock 200 --mclock 0) for kawpow RTX3090.
It is good for me. No high temp.
I m getting high temp if I mine kawpow + zil (mining zil)
So i had to put power limit 330W.
I also tried this command (--lock_cclock 1050 --cclock 200 --mclock 0 --zillock 1125 --zilmclock 0)
It gives error.
IMAGE:
https://i.imgur.com/DJrKfHY.png
--pl from -50 to 200
Why ?
I want to use --pl for RTX3090 with 330W. But it gives error.
I think --pl in gminer as percent not W.
is it possible to set power limit as watt ?
IMAGE:
https://i.imgur.com/6A6YgDP.png
I use this command (--lock_cclock 1050 --cclock 200 --mclock 0) for kawpow RTX3090.
It is good for me. No high temp.
I m getting high temp if I mine kawpow + zil (mining zil)
So i had to put power limit 330W.
I also tried this command (--lock_cclock 1050 --cclock 200 --mclock 0 --zillock 1125 --zilmclock 0)
It gives error.
IMAGE:
https://i.imgur.com/DJrKfHY.png
GMiner v3.44 available for download
v3.44
+ added Dero and Dero + ZIL mining support on K1Pool (Nvidia only)
GPU Memory requirements:
13GB+, recommend card - RTX3090/RTX4090
Developer commission:
Dero - 5%
Dero + ZIL - 6% + 0%
Telegram chat: https://t.me/gminer_talk
Telegram announcements: https://t.me/gminer_releases
Discord: https://discord.gg/J7RUG3FDYw
mmpOS update command:
Hive OS update command:
minerstat OS update command:
v3.44
+ added Dero and Dero + ZIL mining support on K1Pool (Nvidia only)
GPU Memory requirements:
13GB+, recommend card - RTX3090/RTX4090
Developer commission:
Dero - 5%
Dero + ZIL - 6% + 0%
Telegram chat: https://t.me/gminer_talk
Telegram announcements: https://t.me/gminer_releases
Discord: https://discord.gg/J7RUG3FDYw
mmpOS update command:
Code:
cd /tmp && wget https://github.com/develsoftware/GMinerRelease/releases/download/3.44/gminer_3_44_linux64.tar.xz && tar -xvf gminer_3_44_linux64.tar.xz && cd /opt/mmp/miners/gminer && agent-stop && cp /tmp/miner . && agent-start
Hive OS update command:
Code:
cd /tmp && wget https://github.com/develsoftware/GMinerRelease/releases/download/3.44/gminer_3_44_linux64.tar.xz && tar -xvf gminer_3_44_linux64.tar.xz && cd /hive/miners/gminer && miner stop && cp /tmp/miner $(ls -d1 */ | tail -1)/gminer && miner start
minerstat OS update command:
Code:
cd /tmp; wget https://github.com/develsoftware/GMinerRelease/releases/download/3.44/gminer_3_44_linux64.tar.xz; tar -xvf gminer_3_44_linux64.tar.xz; sudo cp /tmp/miner /home/minerstat/minerstat-os/clients/gminer; mstart
Yes. You can prescribe overclocking parameters for each flight sheet without using HiveOS overclocking just by specifying in extra config
--lock_cclock 1200 --mclock 1900
is it possible to set these values acording to algortihm ?
For example:
nexapow: --lock_cclock 1600 --mclock 810
karlsenhash: --lock_cclock 1200 --mclock 810
etchash: ---lock_cclock 1150 --mclock 2900
I use HiveOS for all of my rigs.
I had to change manually this values each time I change the algo.
We can put them all in extra config then the miner automatically select it acording to the algorithm.
is it possible to set these values acording to algortihm ?
For example:
nexapow: --lock_cclock 1600 --mclock 810
karlsenhash: --lock_cclock 1200 --mclock 810
etchash: ---lock_cclock 1150 --mclock 2900
I use HiveOS for all of my rigs.
I had to change manually this values each time I change the algo.
We can put them all in extra config then the miner automatically select it acording to the algorithm.
On NiceHash any algo + ZIL, GMiner detect epoch 0 mining coin as ZIL mining (but true ZIL epoch 1, at this moment ). Its BUG.
Decred has gone back to gpu mining, could you guys ad blake3 pow for that coin?
GMiner v3.43 available for download
v3.43
+ added KarlsenHash and KarlsenHash+ZIL support for Nvidia GPUs (DevFee 1%)
Telegram chat: https://t.me/gminer_talk
Telegram announcements: https://t.me/gminer_releases
Discord: https://discord.gg/J7RUG3FDYw
mmpOS update command:
Hive OS update command:
minerstat OS update command:
v3.43
+ added KarlsenHash and KarlsenHash+ZIL support for Nvidia GPUs (DevFee 1%)
Telegram chat: https://t.me/gminer_talk
Telegram announcements: https://t.me/gminer_releases
Discord: https://discord.gg/J7RUG3FDYw
mmpOS update command:
Code:
cd /tmp && wget https://github.com/develsoftware/GMinerRelease/releases/download/3.43/gminer_3_43_linux64.tar.xz && tar -xvf gminer_3_43_linux64.tar.xz && cd /opt/mmp/miners/gminer && agent-stop && cp /tmp/miner . && agent-start
Hive OS update command:
Code:
cd /tmp && wget https://github.com/develsoftware/GMinerRelease/releases/download/3.43/gminer_3_43_linux64.tar.xz && tar -xvf gminer_3_43_linux64.tar.xz && cd /hive/miners/gminer && miner stop && cp /tmp/miner $(ls -d1 */ | tail -1)/gminer && miner start
minerstat OS update command:
Code:
cd /tmp; wget https://github.com/develsoftware/GMinerRelease/releases/download/3.43/gminer_3_43_linux64.tar.xz; tar -xvf gminer_3_43_linux64.tar.xz; sudo cp /tmp/miner /home/minerstat/minerstat-os/clients/gminer; mstart
Can someone help please.
Win10 64 22h2. P104-8gb. Mining zhash on nicehash gives share above target rejected. Tried everything no oc still gets target above. Is this bug?or someone knows? Thanks
Win10 64 22h2. P104-8gb. Mining zhash on nicehash gives share above target rejected. Tried everything no oc still gets target above. Is this bug?or someone knows? Thanks
Share above target is the same as low difficulty. Could be a bug or misconfiguration of either the miner, nicehash, or the actual coin.
Look for diff related options like diff-factor or diff-multiplier where you can tweak the target, Increase diff based on the rate of of rejects you're getting: 50% rejects increase by 2x.
Increase it too high and you'll reduce the effective hash rate by throwing away some valid shares.
This isn't a solution just a workaround.
Can someone help please.
Win10 64 22h2. P104-8gb. Mining zhash on nicehash gives share above target rejected. Tried everything no oc still gets target above. Is this bug?or someone knows? Thanks
Win10 64 22h2. P104-8gb. Mining zhash on nicehash gives share above target rejected. Tried everything no oc still gets target above. Is this bug?or someone knows? Thanks
GMiner v3.42 available for download
v3.42
+ improved miner stability
Telegram chat: https://t.me/gminer_talk
Telegram announcements: https://t.me/gminer_releases
Discord: https://discord.gg/J7RUG3FDYw
mmpOS update command:
Hive OS update command:
minerstat OS update command:
v3.42
+ improved miner stability
Telegram chat: https://t.me/gminer_talk
Telegram announcements: https://t.me/gminer_releases
Discord: https://discord.gg/J7RUG3FDYw
mmpOS update command:
Code:
cd /tmp && wget https://github.com/develsoftware/GMinerRelease/releases/download/3.42/gminer_3_42_linux64.tar.xz && tar -xvf gminer_3_42_linux64.tar.xz && cd /opt/mmp/miners/gminer && agent-stop && cp /tmp/miner . && agent-start
Hive OS update command:
Code:
cd /tmp && wget https://github.com/develsoftware/GMinerRelease/releases/download/3.42/gminer_3_42_linux64.tar.xz && tar -xvf gminer_3_42_linux64.tar.xz && cd /hive/miners/gminer && miner stop && cp /tmp/miner $(ls -d1 */ | tail -1)/gminer && miner start
minerstat OS update command:
Code:
cd /tmp; wget https://github.com/develsoftware/GMinerRelease/releases/download/3.42/gminer_3_42_linux64.tar.xz; tar -xvf gminer_3_42_linux64.tar.xz; sudo cp /tmp/miner /home/minerstat/minerstat-os/clients/gminer; mstart
Last official version from Zminer777 (master topic) is that https://github.com/develsoftware/GMinerRelease/releases/tag/3.41
Beware for version above, could be an compromised (stollen account)!
EDIT:
It was deleted by staff, thanks!
Beware for version above, could be an compromised (stollen account)!
EDIT:
It was deleted by staff, thanks!
Abandonned miners are easy targets to use as vehicles to spread malware, Claymore, Phoenix, now Gminer. A good rule is to always download from the OP.
Dear developer if you reading this please add new coins.more coins more miners 
This won´t happen, i think it is dead, like T-Rex miner. And it is better to write in the Gminer discord to get informations.
Dear developer if you reading this please add new coins.more coins more miners
Due to the fact that there is a constant switching of orders to DaggerHashimoto on NiceHash, and the appearance of mining coins with an epoch of 0 (for example, PowBlocks - XPB), additional ZIL mining becomes impossible. Please add the ZIL API to determine the real ZIL mining round.
https://github.com/Zilliqa/apidocs/blob/master/source/index.html.md
POST Method GetNumTxBlocks to https://api.zilliqa.com
https://github.com/Zilliqa/apidocs/blob/master/source/index.html.md
POST Method GetNumTxBlocks to https://api.zilliqa.com
Use the latest version of the miner 3.41. ZIL currently has epoch 1
Code:
miner.exe --watchdog_restart_delay 5 --mt 1 --proto stratum --algo autolykos2 --dalgo ironfish -s autolykos.auto.nicehash.com:9200 -u ***** -p x --ssl 0 --dserver ironfish.auto.nicehash.com:9200 --duser ***** --dpass x --dssl 0 --zilserver stratum+tcp://daggerhashimoto.auto.nicehash.com:9200 --ziluser *****
Code:
11:04:35 [IronFish] Connected to ironfish.auto.nicehash.com:9200 [34.110.146.218]
11:04:35 [ZIL] Connected to daggerhashimoto.auto.nicehash.com:9200 [34.149.10.66]
11:04:35 [Autolykos2] Connected to autolykos.auto.nicehash.com:9200 [34.149.62.115]
11:04:35 [IronFish] Authorized on Stratum Server
11:04:35 [IronFish] New Job: 730319408 Diff: 137.4G
11:04:35 [ZIL] Subscribed to Stratum Server
11:04:35 [ZIL] Set Extra Nonce: 22394a
11:04:35 [Autolykos2] Subscribed to Stratum Server
11:04:35 [Autolykos2] Set Extra Nonce: 0f94
11:04:35 [ZIL] Authorized on Stratum Server
11:04:35 [ZIL] New Job: 00000000a9bcbd5e Epoch: #0 Diff: 1.073G
11:04:35 ZIL Mining round started
11:04:35 [Autolykos2] Authorized on Stratum Server
11:04:35 [Autolykos2] New Job: 0000000066dfc4bb Height: 1087871 Diff: 2.147G
11:04:35 Started Mining on GPU0: NVIDIA NVIDIA GeForce RTX 3060 12GB [0000:03:00.0]
11:04:36 [ZIL] GPU0: Generating DAG for epoch #0 [Single Buffer 1024 MB]
11:04:38 [ZIL] GPU0: DAG generated in 1.85s [553 MB/s]
11:04:38 [ZIL] GPU0: DAG verification passed
11:04:39 [ZIL] GPU0: Share #1 verified on CPU, difficulty: 9.190G
11:04:39 [ZIL] GPU0: Share #1 accepted 49 ms
11:04:43 [Autolykos2] New Job: 0000000066dfc4bc Height: 1087872 Diff: 2.147G
11:04:43 [ZIL] New Job: 00000000a9bcbd5f Epoch: #0 Diff: 1.073G
11:04:45 [ZIL] New Job: 00000000a9bcbd60 Epoch: #0 Diff: 1.073G
11:04:35 [ZIL] Connected to daggerhashimoto.auto.nicehash.com:9200 [34.149.10.66]
11:04:35 [Autolykos2] Connected to autolykos.auto.nicehash.com:9200 [34.149.62.115]
11:04:35 [IronFish] Authorized on Stratum Server
11:04:35 [IronFish] New Job: 730319408 Diff: 137.4G
11:04:35 [ZIL] Subscribed to Stratum Server
11:04:35 [ZIL] Set Extra Nonce: 22394a
11:04:35 [Autolykos2] Subscribed to Stratum Server
11:04:35 [Autolykos2] Set Extra Nonce: 0f94
11:04:35 [ZIL] Authorized on Stratum Server
11:04:35 [ZIL] New Job: 00000000a9bcbd5e Epoch: #0 Diff: 1.073G
11:04:35 ZIL Mining round started
11:04:35 [Autolykos2] Authorized on Stratum Server
11:04:35 [Autolykos2] New Job: 0000000066dfc4bb Height: 1087871 Diff: 2.147G
11:04:35 Started Mining on GPU0: NVIDIA NVIDIA GeForce RTX 3060 12GB [0000:03:00.0]
11:04:36 [ZIL] GPU0: Generating DAG for epoch #0 [Single Buffer 1024 MB]
11:04:38 [ZIL] GPU0: DAG generated in 1.85s [553 MB/s]
11:04:38 [ZIL] GPU0: DAG verification passed
11:04:39 [ZIL] GPU0: Share #1 verified on CPU, difficulty: 9.190G
11:04:39 [ZIL] GPU0: Share #1 accepted 49 ms
11:04:43 [Autolykos2] New Job: 0000000066dfc4bc Height: 1087872 Diff: 2.147G
11:04:43 [ZIL] New Job: 00000000a9bcbd5f Epoch: #0 Diff: 1.073G
11:04:45 [ZIL] New Job: 00000000a9bcbd60 Epoch: #0 Diff: 1.073G
Due to the fact that there is a constant switching of orders to DaggerHashimoto on NiceHash, and the appearance of mining coins with an epoch of 0 (for example, PowBlocks - XPB), additional ZIL mining becomes impossible. Please add the ZIL API to determine the real ZIL mining round.
https://github.com/Zilliqa/apidocs/blob/master/source/index.html.md
POST Method GetNumTxBlocks to https://api.zilliqa.com
https://github.com/Zilliqa/apidocs/blob/master/source/index.html.md
POST Method GetNumTxBlocks to https://api.zilliqa.com
Use the latest version of the miner 3.41. ZIL currently has epoch 1
Due to the fact that there is a constant switching of orders to DaggerHashimoto on NiceHash, and the appearance of mining coins with an epoch of 0 (for example, PowBlocks - XPB), additional ZIL mining becomes impossible. Please add the ZIL API to determine the real ZIL mining round.
https://github.com/Zilliqa/apidocs/blob/master/source/index.html.md
POST Method GetNumTxBlocks to https://api.zilliqa.com
https://github.com/Zilliqa/apidocs/blob/master/source/index.html.md
POST Method GetNumTxBlocks to https://api.zilliqa.com
Jump to: