Topic: [OS] nvOC easy-to-use Linux Nvidia Mining - page 304. (Read 418257 times)
On the road; I will respond to everyone fully when I get back to a desktop, and reliable internet in a few days.
question for fullzero: Is there a reason why you do not failover mining pool addresses in 1bash? I was watching my rig (for a completely separate issue which I might require help later) it lost connection to the mining pool I use (nanopool west) then the mining process tried restarted twice, then the whole rig just shut down. I tested my internet connection while the rig was restarting and trying to connect to the pool and my connection was ok. Wouldn't it be better to connect to a failover pool address and if it connects to the failover, try to re-establish with the original pool an hour later? or something along that line, perhaps incorporated into the watchdog? It's cool that it shut itself down and not waste power, but I would prefer that the rig try to connect to another pool if it can.
Didn't work for me at all. Hardly matters now. Too many miners and sellers and no buyers. SIGT is circling the drain and about to be flushed...Moving on to another coin
TPccminer is failing.
[2017-07-28 14:56:44] Starting on stratum+tcp://sigt.suprnova.cc:7106
[2017-07-28 14:56:44] NVML GPU monitoring enabled.
[2017-07-28 14:56:44] 5 miner threads started, using 'skunk' algorithm.
Illegal instruction
I followed all instructions.
I copied over new files you provided.
Do I need to compile again?
Now I got all AMD rigs on SGminer and SIGT I am stuck on what I thought was the easy one! The Nvidia rig! jeez
[2017-07-28 14:56:44] Starting on stratum+tcp://sigt.suprnova.cc:7106
[2017-07-28 14:56:44] NVML GPU monitoring enabled.
[2017-07-28 14:56:44] 5 miner threads started, using 'skunk' algorithm.
Illegal instruction
I followed all instructions.
I copied over new files you provided.
Do I need to compile again?
Now I got all AMD rigs on SGminer and SIGT I am stuck on what I thought was the easy one! The Nvidia rig! jeez
I did following and it worked for me:
1) I downloaded "v2 Alexis78 and Tpuvot 2.2 ccminer clients" from page 1 link and extracted as instructions (dirname) says.
2) I followed instructions in this post https://bitcointalksearch.org/topic/m.20411710 and run chmod and added "COIN="SIGT" and rest of the code to end of the 1bash file... "
It worked perfectly, no compile needed.
Yes that works, but there is a more optimized version now giving +30%-40% extra hashrate for SIGT on 1050/60/70/80 cards. It was compiled for ubuntu by Palgin, however its not running in nvOC : https://bitcointalksearch.org/topic/m.20437974
After reading the ccminer readme.txt I just noticed that DMD and ZCOIN had the wrong algo commands in onebash:
DMD = dmd-gr
ZCOIN = lyra2z
Not that anyone is mining these anymore
DMD = dmd-gr
ZCOIN = lyra2z
Not that anyone is mining these anymore
TPccminer is failing.
[2017-07-28 14:56:44] Starting on stratum+tcp://sigt.suprnova.cc:7106
[2017-07-28 14:56:44] NVML GPU monitoring enabled.
[2017-07-28 14:56:44] 5 miner threads started, using 'skunk' algorithm.
Illegal instruction
I followed all instructions.
I copied over new files you provided.
Do I need to compile again?
Now I got all AMD rigs on SGminer and SIGT I am stuck on what I thought was the easy one! The Nvidia rig! jeez
[2017-07-28 14:56:44] Starting on stratum+tcp://sigt.suprnova.cc:7106
[2017-07-28 14:56:44] NVML GPU monitoring enabled.
[2017-07-28 14:56:44] 5 miner threads started, using 'skunk' algorithm.
Illegal instruction
I followed all instructions.
I copied over new files you provided.
Do I need to compile again?
Now I got all AMD rigs on SGminer and SIGT I am stuck on what I thought was the easy one! The Nvidia rig! jeez
I did following and it worked for me:
1) I downloaded "v2 Alexis78 and Tpuvot 2.2 ccminer clients" from page 1 link and extracted as instructions (dirname) says.
2) I followed instructions in this post https://bitcointalksearch.org/topic/m.20411710 and run chmod and added "COIN="SIGT" and rest of the code to end of the 1bash file... "
It worked perfectly, no compile needed.
Hi,
I got a gainward 1060 today and it is the first card that ignores the power-limit out of 8 cards (gigabyte, asus) wether I set it by bash or nvidia-smi. ie. sucks 100w/80w. card damaged?
still using v0017
btw: any planned date for v0019? I much appretiate this OS!
best regards
I got a gainward 1060 today and it is the first card that ignores the power-limit out of 8 cards (gigabyte, asus) wether I set it by bash or nvidia-smi. ie. sucks 100w/80w. card damaged?
still using v0017
btw: any planned date for v0019? I much appretiate this OS!
best regards
fullzero thanks for such a great and handy os for mining, real timesaver.
Currently mining SIGT with 1070 and having around 19-19.75 MH/s per card (100 COC, 1300 MOC, 125 PW, intensity 20). Tried different settings, tweaked to 20MH/s, but it wasn't stable, so this is where I stopped.
One question: Sometimes miner still crashes and I don't see the reason, screen is just getting terminated and I just see that miner restarts. Is there any log file where I could see reason for last termination. Thanks.
BTW yesterday I contacted sp too about signatum ccminer mod, I was ready to pay him 0.05 BTC for mod, but unfortunately he said he makes only mod for windows. Maybe someone can convince him there is quite big audience for him if he makes linux version.
Currently mining SIGT with 1070 and having around 19-19.75 MH/s per card (100 COC, 1300 MOC, 125 PW, intensity 20). Tried different settings, tweaked to 20MH/s, but it wasn't stable, so this is where I stopped.
One question: Sometimes miner still crashes and I don't see the reason, screen is just getting terminated and I just see that miner restarts. Is there any log file where I could see reason for last termination. Thanks.
BTW yesterday I contacted sp too about signatum ccminer mod, I was ready to pay him 0.05 BTC for mod, but unfortunately he said he makes only mod for windows. Maybe someone can convince him there is quite big audience for him if he makes linux version.
TPccminer is failing.
[2017-07-28 14:56:44] Starting on stratum+tcp://sigt.suprnova.cc:7106
[2017-07-28 14:56:44] NVML GPU monitoring enabled.
[2017-07-28 14:56:44] 5 miner threads started, using 'skunk' algorithm.
Illegal instruction
I followed all instructions.
I copied over new files you provided.
Do I need to compile again?
Now I got all AMD rigs on SGminer and SIGT I am stuck on what I thought was the easy one! The Nvidia rig! jeez
[2017-07-28 14:56:44] Starting on stratum+tcp://sigt.suprnova.cc:7106
[2017-07-28 14:56:44] NVML GPU monitoring enabled.
[2017-07-28 14:56:44] 5 miner threads started, using 'skunk' algorithm.
Illegal instruction
I followed all instructions.
I copied over new files you provided.
Do I need to compile again?
Now I got all AMD rigs on SGminer and SIGT I am stuck on what I thought was the easy one! The Nvidia rig! jeez
https://youtu.be/fOzz6YFSNxE
Put together a video on the rig build phil designed using nvOC, sorry this took so long to get together
Put together a video on the rig build phil designed using nvOC, sorry this took so long to get together
Yup emptied my Coinbase, Bittrex and everything else a week ago.
Export all private keys after moving back to chain
Export all private keys after moving back to chain
Thats one big warning and abuse of font size - LOL - jokes aside...
I have emptied my Coinbase account 2 days ago, and will be using another provider that's supports both chains, updated and backed-up Core wallet, moved BTC to cash, ETH, DASH and LTC; and moved the stash to Trezor.
I have emptied my Coinbase account 2 days ago, and will be using another provider that's supports both chains, updated and backed-up Core wallet, moved BTC to cash, ETH, DASH and LTC; and moved the stash to Trezor.
Let me send you access to the rig. There are 13 cards, test how much it will fit in
UPDATE:
Bug Fix you did to make P106 run fine, but here in Xorg to add at least coolbits forgot like .... and why then I have only 10 cards there, instead of 13. I tried to edit, all to register. But after the restart, nvoc restored its xorg.
http://Http://prntscr.com/g102c9
I hope that after reading, you will quickly send a fix version.
UPDATE:
Bug Fix you did to make P106 run fine, but here in Xorg to add at least coolbits forgot like .... and why then I have only 10 cards there, instead of 13. I tried to edit, all to register. But after the restart, nvoc restored its xorg.
http://Http://prntscr.com/g102c9
I hope that after reading, you will quickly send a fix version.
It looks like you are using integrated graphics in this xorg.conf
Please connect the display to the primary GPU (one in the 16x slot) and reboot.
Close the 1bash process when it starts; before it tries to reboot.
Open the xorg.conf and copy all the contents by copying the text (ctrl + a then ctrl +c) and pasting them in a new file you make on the desktop or home folder.
then
Please post the contents of that file here. This will help me make an xorg.conf .
Hello!
I connected cards with a monitor in x16.
The system started without error and the miner started.
Copied Xorg, but it's the same as without a card with an active monitor.
I installed your bug fix before that and the system began to start without errors.
Xorg - https://yadi.sk/d/3_2ODI8C3LVbZ8
try this xorg.conf: https://drive.google.com/file/d/0B3ra23kLdr5lM0VkWkZHVTZyVGc/view?usp=sharing
extract it to your home folder then open guake and enter the cmd:
Code:
sudo cp '/home/m1/xorg.conf' '/etc/X11/xorg.conf'
then logout
and log back in
the xorg.conf pcie addressing in the example you listed looks very strange so I'm not sure if this will work.
Let me know.
I found SIGT hashrates here: http://cryptoage.com/ru/857-signatum-sign-%D0%BA%D1%80%D0%B8%D0%BF%D1%82%D0%BE%D0%B2%D0%B0%D0%BB%D1%8E%D1%82%D0%B0-%D0%BD%D0%B0-%D0%BD%D0%BE%D0%B2%D0%BE%D0%BC-%D0%B0%D0%BB%D0%B3%D0%BE%D1%80%D0%B8%D1%82%D0%BC%D0%B5-skunkhash-raptor.html
looks like i'm underperforming or maybe have the wrong flavor of 1050ti
looks like i'm underperforming or maybe have the wrong flavor of 1050ti
I was getting 5570 KH/s with a single EVGA 1050ti SC; not sure what my OC settings were on that image. What model 1050ti do you have?
Windows and Linux builds of ccminer are very similar (almost the same).
It would make sense for sp to make a linux client with a fee like claymore or ewbf and provide it for free.
I would add it to nvOC; and I'm sure a lot of members would use it.
fullzero, is it possible to use the hidden disk spaces? My usb key is 32GB, but I cannot see all of them in nvOC:
Code:
m1@m1-desktop:~$ df -h
Filesystem Size Used Avail Use% Mounted on
udev 1.9G 0 1.9G 0% /dev
tmpfs 392M 12M 380M 3% /run
/dev/sda2 15G 13G 920M 94% /
tmpfs 2.0G 192K 2.0G 1% /dev/shm
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup
tmpfs 392M 56K 392M 1% /run/user/1000
/dev/sda1 8.9M 60K 8.8M 1% /media/m1/1263-A96E
You can extend the primary partition on any key / ssd; by connecting it to a computer with nvOC that has already booted and clicking the ubuntu launcher at the top left and typing
Code:
gp
then click Gparted. Find the sdb drive select the larger partition; it it is mounted unmount it; then rightclick and select resize and set the max size.
click the green checkmark to execute the change, wait for completion and it should be ~17gb larger.
Also you can remove unused header files with this oneliner from _Parallax_:
Code:
sudo apt-get purge $(dpkg -l linux-{image,headers}-"[0-9]*" | awk '/ii/{print $2}' | grep -ve "$(uname -r | sed -r 's/-[a-z]+//')")Is this better than CUDA zcash miner?
I am not sure what you are referring to. I am also not familiar with 'CUDA zcash miner'. Maybe another member knows.
I found SIGT hashrates here: http://cryptoage.com/ru/857-signatum-sign-%D0%BA%D1%80%D0%B8%D0%BF%D1%82%D0%BE%D0%B2%D0%B0%D0%BB%D1%8E%D1%82%D0%B0-%D0%BD%D0%B0-%D0%BD%D0%BE%D0%B2%D0%BE%D0%BC-%D0%B0%D0%BB%D0%B3%D0%BE%D1%80%D0%B8%D1%82%D0%BC%D0%B5-skunkhash-raptor.html
looks like i'm underperforming or maybe have the wrong flavor of 1050ti
looks like i'm underperforming or maybe have the wrong flavor of 1050ti
I was getting 5570 KH/s with a single EVGA 1050ti SC; not sure what my OC settings were on that image. What model 1050ti do you have?
fullzero, is it possible to use the hidden disk spaces? My usb key is 32GB, but I cannot see all of them in nvOC:
Code:
m1@m1-desktop:~$ df -h
Filesystem Size Used Avail Use% Mounted on
udev 1.9G 0 1.9G 0% /dev
tmpfs 392M 12M 380M 3% /run
/dev/sda2 15G 13G 920M 94% /
tmpfs 2.0G 192K 2.0G 1% /dev/shm
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup
tmpfs 392M 56K 392M 1% /run/user/1000
/dev/sda1 8.9M 60K 8.8M 1% /media/m1/1263-A96E
Let me send you access to the rig. There are 13 cards, test how much it will fit in
UPDATE:
Bug Fix you did to make P106 run fine, but here in Xorg to add at least coolbits forgot like .... and why then I have only 10 cards there, instead of 13. I tried to edit, all to register. But after the restart, nvoc restored its xorg.
http://Http://prntscr.com/g102c9
I hope that after reading, you will quickly send a fix version.
UPDATE:
Bug Fix you did to make P106 run fine, but here in Xorg to add at least coolbits forgot like .... and why then I have only 10 cards there, instead of 13. I tried to edit, all to register. But after the restart, nvoc restored its xorg.
http://Http://prntscr.com/g102c9
I hope that after reading, you will quickly send a fix version.
It looks like you are using integrated graphics in this xorg.conf
Please connect the display to the primary GPU (one in the 16x slot) and reboot.
Close the 1bash process when it starts; before it tries to reboot.
Open the xorg.conf and copy all the contents by copying the text (ctrl + a then ctrl +c) and pasting them in a new file you make on the desktop or home folder.
then
Please post the contents of that file here. This will help me make an xorg.conf .
Hello!
I connected cards with a monitor in x16.
The system started without error and the miner started.
Copied Xorg, but it's the same as without a card with an active monitor.
I installed your bug fix before that and the system began to start without errors.
Xorg - https://yadi.sk/d/3_2ODI8C3LVbZ8
Hello guys,
Any of you mining Pascal Lite? If so can you please share your PASL coin code part from oneBash (would prefer DUAL though), would like to create an account with PASL.
Tried with accounts.pascallite.com, but don't have any PASL on Cryptopia to buy (it just costs 0.05 PASL though), so want to try pasl.fairpool.xyz as they said they will give an account if I mine with my public wallet key for 12.25 PASL.
I've tried to edit and add on my oneBash, it does nothing but crashing/hanging my RIG.
Thanks in advance.
&&
Would also like to share my stable OC settings with ASUS DUAL 1060 6GB.
cc : -100; mc: 1100; pl : 90W
giving me 170MH for ETHASH and 200MH for LBC (dcri-40)
Hope it help some new users trying for stable OC, also happy to get some advice if I can increase the yield.
Thanks and good luck with our mining.
Hail fullZero for creating and expanding this OS with amazing support.
Long live CRYPTO & fullZero...
Any of you mining Pascal Lite? If so can you please share your PASL coin code part from oneBash (would prefer DUAL though), would like to create an account with PASL.
Tried with accounts.pascallite.com, but don't have any PASL on Cryptopia to buy (it just costs 0.05 PASL though), so want to try pasl.fairpool.xyz as they said they will give an account if I mine with my public wallet key for 12.25 PASL.
I've tried to edit and add on my oneBash, it does nothing but crashing/hanging my RIG.
Thanks in advance.
&&
Would also like to share my stable OC settings with ASUS DUAL 1060 6GB.
cc : -100; mc: 1100; pl : 90W
giving me 170MH for ETHASH and 200MH for LBC (dcri-40)
Hope it help some new users trying for stable OC, also happy to get some advice if I can increase the yield.
Thanks and good luck with our mining.
Hail fullZero for creating and expanding this OS with amazing support.
Long live CRYPTO & fullZero...
Jump to: