[OS] nvOC easy-to-use Linux Nvidia Mining - page 300.

ATCkit

hero member

Activity: 786

Merit: 1000

Quote from: damNmad on August 04, 2017, 01:08:52 PM

Quote from: ATCkit on August 04, 2017, 12:59:17 PM

Anyone know how to set up Mining Pool hub in 1 Bash? My attempts have failed

Here's one example:

MUSIC_WORKER="nv$IP_AS_WORKER"
MUSIC_ADDRESS="ATCkit9"
MUSIC_POOL="us-east.ethash-hub.miningpoolhub.com:20585"
MUSIC_EXTENTION_ARGUMENTS=""

Are you just mining MUSIC or DUAL_MUSIC_XXX??

Let me know this, i will give you the code to work it out.

I`m mining single coins only. With my AMD rig, I switch coins manually about once a day. MUSIC will be one of the coins I watch on What to mine.

In short, if you can show me what works for MUSIC, I can apply the logic for the other coins MPH offers.

philipma1957

legendary

Activity: 4326

Merit: 8914

'The right to privacy matters'

Quote from: fogcity on August 04, 2017, 12:01:55 PM

Hello all --

I'm using v0018 with 6x nvidia 1070s and all is fine. I was just wondering --- How long will my GPUs last running 24/7 ?

Does anyone have an idea or enough rig history to know?

Regards !!!

I have used cards 2 years then sold them . So if you are lucky 2 years is a good rule of thumb.

depends on the pedal to the metal or just cruising mind set.

I am gentle with my cards and they last.

I posted today because I found a killer usb stick http://www.ebay.com/itm/Lexar-64GB-JumpDrive-P20-USB-3-0-Flash-Drive-Speed-Up-to-400MB-s-LJDP20-64GCRB/381906408887?

I am going to do a build with it soon. it should be good enough to allow me to run the linux very easily. as a os along with mine 3 1080 ti's

I will post back on sunday or monday once build is done.

fogcity

newbie

Activity: 11

Merit: 0

Quote from: Nexillus on August 04, 2017, 01:51:32 PM

Quote from: fogcity on August 04, 2017, 12:01:55 PM

Hello all --

I'm using v0018 with 6x nvidia 1070s and all is fine. I was just wondering --- How long will my GPUs last running 24/7 ?

Does anyone have an idea or enough rig history to know?

Regards !!!

I have two rigs go almost 3 weeks 24/7. Only one has done a soft reset in which the miner reset and started back up.

The second rig hasn't even had a soft reset in the three weeks.

That's cool but that's not what I'm trying to ask. I'm wondering if after a solid year or two will my GPUs break down and require replacement?

Regards!

dandreark1

full member

Activity: 145

Merit: 100

out here

Ey mate any chance you're thinking about adding skunkhash raptor algo into v19?

dbolivar

member

Activity: 119

Merit: 10

Quote from: lards on August 04, 2017, 11:57:19 AM

Hi guys, has anyone tried to use this OS with P106-100 mining cards without video output as I keep getting "XORG FAIL" error and the system reboots. After that it just shows :

error: unknown filesystem
grab rescue>

Does this happen because the monitor is connected to the motherboard since I do not have any video output available, can I maybe edit the xorg.conf file to get rid of this error?

Would be very thankful for any help, been trying to work this out for 3 days now...

For the Xorg error, I'm not sure, but I guess that you need at least one GPU with video output, and that GPU should be connected to the first PCIe slot (closest to the CPU). At least that's what every Linux mining howto says.

Regarding the Grub error, it seems like a corrupted USB stick, since it's not even able to load the kernel. I'd suggest reflashing nvOC, and/or trying a different USB stick.

Nexillus

full member

Activity: 169

Merit: 100

Quote from: fogcity on August 04, 2017, 12:01:55 PM

Hello all --

I'm using v0018 with 6x nvidia 1070s and all is fine. I was just wondering --- How long will my GPUs last running 24/7 ?

Does anyone have an idea or enough rig history to know?

Regards !!!

I have two rigs go almost 3 weeks 24/7. Only one has done a soft reset in which the miner reset and started back up.

The second rig hasn't even had a soft reset in the three weeks.

Nexillus

full member

Activity: 169

Merit: 100

Quote from: ?? on ??

Google Drive link is broken. Mega trying to force me to buy subscription. Can someone upload last version somewhere?

Here you go!

Here is the link to the V0018 zip.

https://drive.google.com/open?id=0ByJXLZMdXVX5TVpnVGxWQmhTZFk

Also the SH256 hash (same as on the front page from Fullzero)

Code:

9c81574cdd515103cc7a331c3bfdbe5dd94ef10574c227ec9b81cb581a1049f4

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: ATCkit on August 04, 2017, 12:59:17 PM

Anyone know how to set up Mining Pool hub in 1 Bash? My attempts have failed

Here's one example:

MUSIC_WORKER="nv$IP_AS_WORKER"
MUSIC_ADDRESS="ATCkit9"
MUSIC_POOL="us-east.ethash-hub.miningpoolhub.com:20585"
MUSIC_EXTENTION_ARGUMENTS=""

Are you just mining MUSIC or DUAL_MUSIC_XXX??

Let me know this, i will give you the code to work it out.

ATCkit

hero member

Activity: 786

Merit: 1000

Anyone know how to set up Mining Pool hub in 1 Bash? My attempts have failed

Here's one example:

MUSIC_WORKER="nv$IP_AS_WORKER"
MUSIC_ADDRESS="ATCkit9"
MUSIC_POOL="us-east.ethash-hub.miningpoolhub.com:20585"
MUSIC_EXTENTION_ARGUMENTS=""

fogcity

newbie

Activity: 11

Merit: 0

Hello all --

I'm using v0018 with 6x nvidia 1070s and all is fine. I was just wondering --- How long will my GPUs last running 24/7 ?

Does anyone have an idea or enough rig history to know?

Regards !!!

lards

newbie

Activity: 50

Merit: 0

Hi guys, has anyone tried to use this OS with P106-100 mining cards without video output as I keep getting "XORG FAIL" error and the system reboots. After that it just shows :

error: unknown filesystem
grab rescue>

Does this happen because the monitor is connected to the motherboard since I do not have any video output available, can I maybe edit the xorg.conf file to get rid of this error?

Would be very thankful for any help, been trying to work this out for 3 days now...

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: VoskCoin on August 04, 2017, 10:00:24 AM

Quote from: hwlgraka on August 04, 2017, 09:59:36 AM

Quote from: VoskCoin on August 04, 2017, 09:55:13 AM

Does bumping fan speed to 100 effect power usage much if really at all?
Only negative is noise? Maybe more wear and tear?

Sorry but that's not really related to my question. It's no problem how loud the graphic cards are, they should just run at 100%. The cooler the card, the longer the lifespan. And at the moments in the room I really need them to run at 100%. They get 70 degree at 50% which is too much.

I don't have the answer to your question yours just prompted mine xD

Has this option been disabled??

Code:

Maxximus007_AUTO_TEMPERATURE_CONTROL="NO"

&

SET

Code:

MANUAL_FAN="YES"
FAN_SPEED=85

??

If not try this, I would suggest (from my experience going through this forum) not to run fans on 100%, try between 85-90 and see how it goes.

VoskCoin

sr. member

Activity: 1414

Merit: 487

YouTube.com/VoskCoin

Quote from: hwlgraka on August 04, 2017, 09:59:36 AM

Quote from: VoskCoin on August 04, 2017, 09:55:13 AM

Does bumping fan speed to 100 effect power usage much if really at all?
Only negative is noise? Maybe more wear and tear?

Sorry but that's not really related to my question. It's no problem how loud the graphic cards are, they should just run at 100%. The cooler the card, the longer the lifespan. And at the moments in the room I really need them to run at 100%. They get 70 degree at 50% which is too much.

I don't have the answer to your question yours just prompted mine xD

hwlgraka

newbie

Activity: 8

Merit: 0

Quote from: VoskCoin on August 04, 2017, 09:55:13 AM

Does bumping fan speed to 100 effect power usage much if really at all?
Only negative is noise? Maybe more wear and tear?

Sorry but that's not really related to my question. It's no problem how loud the graphic cards are, they should just run at 100%. The cooler the card, the longer the lifespan. And at the moments in the room I really need them to run at 100%. They get 70 degree at 50% which is too much.

VoskCoin

sr. member

Activity: 1414

Merit: 487

YouTube.com/VoskCoin

Quote from: Bibi187 on August 04, 2017, 02:54:13 AM

Quote from: BigHashMiner on August 03, 2017, 04:59:53 PM

bah, no support. no use.

And this one is FREE OF CHARGE, like no one else with this level of setting on the market ...
Anyway we dont need user like you oO

Full zero is phenomenal and surely overwhelmed, have some respect

VoskCoin

sr. member

Activity: 1414

Merit: 487

YouTube.com/VoskCoin

Does bumping fan speed to 100 effect power usage much if really at all?
Only negative is noise? Maybe more wear and tear?

hwlgraka

newbie

Activity: 8

Merit: 0

Hello,

first I want to say thank you very much for the amount of effort and work that you put into this software image.
I am also using v0018, but unfortunately the fan speed is not set correctly (I want to set it to 100%).

I have modified the following values in the script:

Code:

MANUAL_FAN="YES"
FAN_SPEED=100
TARGET_TEMP_0=60
TARGET_TEMP_1=60
TARGET_TEMP_2=60
TARGET_TEMP_3=60
TARGET_TEMP_4=60
ALLOWED_TEMP_DIFF=10

Additionally I can see upon startup, that nvidia-cli is setting the fan speed correctly. But however, Claymore is only showing a fan speed of 50%. Furthermore, the temperature is 70 C°, which states that the max temperature setting in the script is also not working as intended.

My hardware:

MB: Asrock Z170 Pro 4
GPU: 5x MSI GTX 1050Ti

Thanks very much in advance.
Kind regards.

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: ?? on ??

Google Drive link is broken. Mega trying to force me to buy subscription. Can someone upload last version somewhere?

Quote from: damNmad on August 01, 2017, 02:44:26 AM

Quote from: Nexillus on July 31, 2017, 10:09:03 PM

Here is the link to the V0018 zip.

https://drive.google.com/open?id=0ByJXLZMdXVX5TVpnVGxWQmhTZFk

Also the SH256 hash (same as on the front page from Fullzero)

Code:

9c81574cdd515103cc7a331c3bfdbe5dd94ef10574c227ec9b81cb581a1049f4

I have also uploaded it to Google drive same as above.

https://drive.google.com/open?id=0B6SRkpyE81fATk9rY2laamdubEE

Hope it helps...

Bibi187

full member

Activity: 420

Merit: 106

https://steemit.com/@bibi187

Quote from: BigHashMiner on August 03, 2017, 04:59:53 PM

bah, no support. no use.

And this one is FREE OF CHARGE, like no one else with this level of setting on the market ...
Anyway we dont need user like you oO

jimmykl

full member

Activity: 349

Merit: 102

Quote from: BigHashMiner on August 03, 2017, 04:59:53 PM

bah, no support. no use.

So you expect the dev to never take a break from work and be available 24/7 to support a product they provide free for the community?

Topic: [OS] nvOC easy-to-use Linux Nvidia Mining - page 300. (Read 418257 times)