rxOC now falls under the mnh_license: https://github.com/hartmanm/mnh_license/blob/main/license.md
SOFTWARE WARNING
IMPORTANT: READ THIS WARNING CAREFULLY BEFORE USING OR VIEWING THE SOFTWARE.
This Software Warning ("Warning") is issued by Michael Neill Hartman ("Licensor") to you ("Potential Violator"). By installing, copying, or viewing the software, methods, scripts, or architecture ("Software") in whole or in part, you ("Potential Violator") acknowledge that you are liable for any damages resulting from such actions.
1. No Grant of License
You are not granted any rights to use, copy, modify, distribute, or view the Software in any form. All rights to the Software are fully retained by the Licensor. The Software may never be used for any purpose, including personal, commercial, educational, governmental, or organizational use. Any interaction with the Software is strictly prohibited. The Licensor retains all rights, title, and interest in the Software, including all intellectual property rights.
2. Previous Versions
Any previous version of the license is void and is replaced with this version. Any existing copies of the ("Software") must be destroyed.
3. Violation Reporting and Reward
Individuals who notify the Licensor in writing of a specific violation of this Agreement are eligible for a reward of 10% of any successful legal settlement resulting from that violation, calculated after taxes. The written notice must provide sufficient details about the violation, and the individual must be the first to provide this information. If multiple individuals submit information that collectively enables a successful legal settlement, the Licensor shall, at their sole discretion, determine the division of the 10% reward after a successful legal settlement.
4. Limitation of Liability
In no event shall the Licensor be liable for any damages arising from the illegal or unauthorized use or interaction with the Software, even if the Licensor has been advised of the possibility of such damages.
Topic: [OS] rxOC easy-to-use Linux AMD Mining v_stopgap (Read 31422 times)
THE SEED FOR rxOC IS ONLINE--
It may occasionally drop after a reboot, but only if my seed is the only seed. --scryptr
It may occasionally drop after a reboot, but only if my seed is the only seed. --scryptr
TORRENT AVAILABLE FOR rxOC--
If anyone wishes to download the final release of rxOC (version StopGap), a torrent is available at my GitHub:
Address-- "GitHub.com/scryptr" .
This is in hope of keeping the software alive. Downloading the OS will require BitTorrent or a compatible file-sharing software. The torrent is downloadable with a web browser. The rxOC OS itself is too large of a file to post directly on GitHub as an archive.
In its current state, rxOC has outdated drivers and software. Feel free to modify it. And, the nvOC discord contains discussion channels for rxOC.
--scryptr
If anyone wishes to download the final release of rxOC (version StopGap), a torrent is available at my GitHub:
Address-- "GitHub.com/scryptr" .
This is in hope of keeping the software alive. Downloading the OS will require BitTorrent or a compatible file-sharing software. The torrent is downloadable with a web browser. The rxOC OS itself is too large of a file to post directly on GitHub as an archive.
In its current state, rxOC has outdated drivers and software. Feel free to modify it. And, the nvOC discord contains discussion channels for rxOC.
--scryptr
Hello! please open the torrent distribution rxoc can not download
TORRENT AVAILABLE FOR rxOC--
If anyone wishes to download the final release of rxOC (version StopGap), a torrent is available at my GitHub:
Address-- "GitHub.com/scryptr" .
This is in hope of keeping the software alive. Downloading the OS will require BitTorrent or a compatible file-sharing software. The torrent is downloadable with a web browser. The rxOC OS itself is too large of a file to post directly on GitHub as an archive.
In its current state, rxOC has outdated drivers and software. Feel free to modify it. And, the nvOC discord contains discussion channels for rxOC.
--scryptr
If anyone wishes to download the final release of rxOC (version StopGap), a torrent is available at my GitHub:
Address-- "GitHub.com/scryptr" .
This is in hope of keeping the software alive. Downloading the OS will require BitTorrent or a compatible file-sharing software. The torrent is downloadable with a web browser. The rxOC OS itself is too large of a file to post directly on GitHub as an archive.
In its current state, rxOC has outdated drivers and software. Feel free to modify it. And, the nvOC discord contains discussion channels for rxOC.
--scryptr
your video cards may be the problem or the video card driver may not recognize.
my 4gb rx470s avaible memory 3975mb looks like yours 2330mb this is not normal.
2330mb not enough for dag file.
so claymore doesn't work.
my 4gb rx470s avaible memory 3975mb looks like yours 2330mb this is not normal.
2330mb not enough for dag file.
so claymore doesn't work.
I don't know why but the video card is not enough.
Does your cards burn?
07: 00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD / ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
08: 00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD / ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
there is such a sign.
does claymore recognize cards as ellesmere
Does your cards burn?
07: 00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD / ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
08: 00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD / ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
there is such a sign.
does claymore recognize cards as ellesmere
http://152.r.photoshare.ru/01522/00e83dd70b952daa9071e643c53fb5f109a6ccca.jpg
I don't know why but the video card is not enough.
Does your cards burn?
07: 00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD / ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
08: 00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD / ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
there is such a sign.
does claymore recognize cards as ellesmere
Does your cards burn?
07: 00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD / ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
08: 00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD / ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
there is such a sign.
does claymore recognize cards as ellesmere
I have an rx570 4gb card, apparently not has enough memory to create a dag file. They worked on Windows, but not on rxoc
I don't know why but the video card is not enough.
Does your cards burn?
07: 00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD / ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
08: 00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD / ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
there is such a sign.
does claymore recognize cards as ellesmere
Does your cards burn?
07: 00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD / ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
08: 00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD / ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
there is such a sign.
does claymore recognize cards as ellesmere
open firefox https://mega.nz/#F!O4YA2JgD!n2b4iSHQDruEsYUvTQP5_w download claymore Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.9 - LINUX.tar.gz
ectract Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.9 - LINUX.tar.gz
copy all of the files to the eth / 10_1 folder.
If there is a warning, accept.
Right-click ethdcrminer64 and enter the properties.
permission section allow executing file as program tick
ectract Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.9 - LINUX.tar.gz
copy all of the files to the eth / 10_1 folder.
If there is a warning, accept.
Right-click ethdcrminer64 and enter the properties.
permission section allow executing file as program tick
http://152.r.photoshare.ru/01521/00e83a9d7ce1af707bc0cd2d052c8eb77fc5dabf.jpg
open firefox https://mega.nz/#F!O4YA2JgD!n2b4iSHQDruEsYUvTQP5_w download claymore Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.9 - LINUX.tar.gz
ectract Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.9 - LINUX.tar.gz
copy all of the files to the eth / 10_1 folder.
If there is a warning, accept.
Right-click ethdcrminer64 and enter the properties.
permission section allow executing file as program tick
ectract Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.9 - LINUX.tar.gz
copy all of the files to the eth / 10_1 folder.
If there is a warning, accept.
Right-click ethdcrminer64 and enter the properties.
permission section allow executing file as program tick
If you are not using claymore 11.9 version can be sourced.
try and upgrade to claymore version 11.9
try and upgrade to claymore version 11.9
How to do it? , I'm new to Linux
If you are not using claymore 11.9 version can be sourced.
try and upgrade to claymore version 11.9
try and upgrade to claymore version 11.9
http://152.r.photoshare.ru/01521/00e839dd5c4aa52eb935ff9e62d34fe756455923.jpg
f12 Press
quake terminal
screen -r miner in summer
enter press
seems to recognize video cards.
quake terminal
screen -r miner in summer
enter press
seems to recognize video cards.
f12 Press
quake terminal
screen -r miner in summer
enter press
seems to recognize video cards.
quake terminal
screen -r miner in summer
enter press
seems to recognize video cards.
1. I can't login, after correct credentials and enter, it is going back to the login screen
2. can't start miner through terminal too
-----------------------------------++++++++++-----------------------------------
root@m1-desktop:~# bash 2unix
workername: 108
rig IP: 192.168.3.108
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
07:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
08:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
=================== ROCm System Management Interface ===================
============================================================================
GPU[0] : PowerPlay not enabled - Cannot display clocks
============================================================================
=================== End of ROCm SMI Log ===================
=================== ROCm System Management Interface ===================
GPU[0] : Cannot reset clocks: Performance Level not supported
=================== End of ROCm SMI Log ===================
=================== ROCm System Management Interface ===================
============================================================================
GPU[0] : Unable to set current PowerPlay Level to high
============================================================================
=================== End of ROCm SMI Log ===================
=================== ROCm System Management Interface ===================
GPU[0] : PowerPlay not enabled - Cannot set clocks
=================== End of ROCm SMI Log ===================
=================== ROCm System Management Interface ===================
GPU[0] : PowerPlay not enabled - Cannot set clocks
=================== End of ROCm SMI Log ===================
Tue Dec 26 10:49:53 EST 2017
Action: Removing ...
systemctl stop teamviewerd.service
Failed to stop teamviewerd.service: Unit teamviewerd.service not loaded.
fail
kill '/opt/teamviewer/tv_bin/script/teamviewer' - root (/home/m1/.local/share/teamviewer12 / /home/m1/.local/share/teamviewer12)
Failed to execute operation: No such file or directory
try again, full path...
Failed to execute operation: Invalid argument
=================== ROCm System Management Interface ===================
============================================================================
GPU[0] : Unable to determine current fan speed
============================================================================
GPU[0] : PowerPlay not enabled - Cannot set fan speed
=================== End of ROCm SMI Log ===================
mining in screen: screen -r miner
-----------------------------------++++++++++-----------------------------------
and that's all........
2. can't start miner through terminal too
-----------------------------------++++++++++-----------------------------------
root@m1-desktop:~# bash 2unix
workername: 108
rig IP: 192.168.3.108
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
07:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
08:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
=================== ROCm System Management Interface ===================
============================================================================
GPU[0] : PowerPlay not enabled - Cannot display clocks
============================================================================
=================== End of ROCm SMI Log ===================
=================== ROCm System Management Interface ===================
GPU[0] : Cannot reset clocks: Performance Level not supported
=================== End of ROCm SMI Log ===================
=================== ROCm System Management Interface ===================
============================================================================
GPU[0] : Unable to set current PowerPlay Level to high
============================================================================
=================== End of ROCm SMI Log ===================
=================== ROCm System Management Interface ===================
GPU[0] : PowerPlay not enabled - Cannot set clocks
=================== End of ROCm SMI Log ===================
=================== ROCm System Management Interface ===================
GPU[0] : PowerPlay not enabled - Cannot set clocks
=================== End of ROCm SMI Log ===================
Tue Dec 26 10:49:53 EST 2017
Action: Removing ...
systemctl stop teamviewerd.service
Failed to stop teamviewerd.service: Unit teamviewerd.service not loaded.
fail
kill '/opt/teamviewer/tv_bin/script/teamviewer' - root (/home/m1/.local/share/teamviewer12 / /home/m1/.local/share/teamviewer12)
Failed to execute operation: No such file or directory
try again, full path...
Failed to execute operation: Invalid argument
=================== ROCm System Management Interface ===================
============================================================================
GPU[0] : Unable to determine current fan speed
============================================================================
GPU[0] : PowerPlay not enabled - Cannot set fan speed
=================== End of ROCm SMI Log ===================
mining in screen: screen -r miner
-----------------------------------++++++++++-----------------------------------
and that's all........
I have same problem whis 4*rx570 cards. Motherboard gigabyte ga-z270-gaming k3
How to start mining
Bumping this thread.
Link to drive is dead, no link to download OS. Ended up getting it off some other mining site but doesn't seem to work. I boot to Ubuntu just fine, bash starts up, goes to "miner in screen -r" but when I type that in, no miner is seen.
cards recognized, basically seems to get stuck after fan speed is defined.
Link to drive is dead, no link to download OS. Ended up getting it off some other mining site but doesn't seem to work. I boot to Ubuntu just fine, bash starts up, goes to "miner in screen -r" but when I type that in, no miner is seen.
cards recognized, basically seems to get stuck after fan speed is defined.
I posted a basic oneBash that can be used to replace the one from the stopgap img on GitHub: https://github.com/hartmanm/rxOC/blob/master/oneBash
It should work and can be changed to support any client or pool.
I no longer have any AMD GPUs and will not update rxOC anymore; it is End of Life.
I managed to get it running yesterday by editing the bash file and running claymore 11.9. I was unable to manually overclock the cards so hash was lower than on hive...And today it just refused to boot up after updating drivers to blockchain ones. Re-imaging drive now.
Why ditch AMD? Seems like decent bang for buck ATM...
Bumping this thread.
Link to drive is dead, no link to download OS. Ended up getting it off some other mining site but doesn't seem to work. I boot to Ubuntu just fine, bash starts up, goes to "miner in screen -r" but when I type that in, no miner is seen.
cards recognized, basically seems to get stuck after fan speed is defined.
Link to drive is dead, no link to download OS. Ended up getting it off some other mining site but doesn't seem to work. I boot to Ubuntu just fine, bash starts up, goes to "miner in screen -r" but when I type that in, no miner is seen.
cards recognized, basically seems to get stuck after fan speed is defined.
if you plugged in a screen to your rig and start the rig, when you are at the desktop, try to open a new terminal and type in: "screen -r miner"
perhaps i am just an idiot and even the simplified version isnt simplified enough for my newbieness but i have having issues. i am trying to solo mine ETH with this and am having incredible difficulties getting the prompt for mining to display (the one that shows speeds and how many shares you have successfully mined). I modified the onebash file such that it is set for ETH mining and i inputed my wallet address, still nothing. so i modified the pool so that it goes through nanopool, still says no pools. inputed like this "eth-us-east1.nanopool.org:9999" I am really new to linux and really have no idea whats going on. honestly, i dont know which way is up. please help.
my rig is an MSI z97 gaming 5 motherboard with a core I5 4440 8gb of ddr3 and 6 rx 580's.
I had it working on windows until this recent update and now everything is slow and fucked up. as far as i can tell, the flash was sucessful and everything is here.
my rig is an MSI z97 gaming 5 motherboard with a core I5 4440 8gb of ddr3 and 6 rx 580's.
I had it working on windows until this recent update and now everything is slow and fucked up. as far as i can tell, the flash was sucessful and everything is here.
Code:
m1@m1-desktop:~$ python2.7 /home/m1/WTM_SWITCHER /home/m1/WTM.json
9169.22
BTC PRICE: 9169.22 USD
ETH 13.50 USD
ZCL 7.58 USD
New profits
ETH: 100 %
ZCL: 56 %
m1@m1-desktop:~$
9169.22
BTC PRICE: 9169.22 USD
ETH 13.50 USD
ZCL 7.58 USD
New profits
ETH: 100 %
ZCL: 56 %
m1@m1-desktop:~$
e: we have some part success: I tried the process again with running 'bash oneBash' in a 'main' screen configured ZCL as coin.
unfortunately the mining process still suffers but the wtm screen is running and after a while it recognized eth is the new coin to go and it switched the mining to eth/claymore inside the 'wtm' screen.
I will try to figure out now why zcl doesn't start. tyvm papampi
e2: ok, I googled this unary expression thing again and found https://stackoverflow.com/questions/13617843/unary-operator-expected
I changed the first lines that had this error for testing in oneBash:
Code:
if [ $COIN == "NICE" ]
then
if [ $GENOILorCLAYMORE == "GENOIL" ]
then
HCD='/home/m1/eth/Genoil/ethminer'
then
if [ $GENOILorCLAYMORE == "GENOIL" ]
then
HCD='/home/m1/eth/Genoil/ethminer'
to the following (There is no reason I did the first two: I started out and on 2nd extra quotation I realised I should have a try first so the first one might have been enough)
Code:
if [ "$COIN" == "NICE" ]
then
if [ "$GENOILorCLAYMORE" == "GENOIL" ]
then
HCD='/home/m1/eth/Genoil/ethminer'
then
if [ "$GENOILorCLAYMORE" == "GENOIL" ]
then
HCD='/home/m1/eth/Genoil/ethminer'
ZCL works again. However, because of these early stages of rxOC there was no screen session implemented for ZCL, only claymore I guess. therefore, a second mining instance starts parallel in wtm screen. I guess I need to add this in oneBash.
e3: hmm yeah, now I get double screen -r miner
What to do? - Code:
if [ $OPTIMINERorCLAYMORE == "CLAYMORE" ]
then
HCD='/home/m1/zec/c12_5/zecminer64'
ZECADDR="$ZEC_ADDRESS.$ZEC_WORKER"
screen -dmS miner $HCD -zpool $ZEC_POOL -zwal $ZECADDR -zpsw x -dbg -1 -i $ZEC_INTENSITY $ZEC_EXTENTION_ARGUMENTS
then
HCD='/home/m1/zec/c12_5/zecminer64'
ZECADDR="$ZEC_ADDRESS.$ZEC_WORKER"
screen -dmS miner $HCD -zpool $ZEC_POOL -zwal $ZECADDR -zpsw x -dbg -1 -i $ZEC_INTENSITY $ZEC_EXTENTION_ARGUMENTS
Jump to: