Phoenix - Efficient, fast, modular miner - page 29.

keybaud

full member

Activity: 120

Merit: 100

Quote from: icaci on May 29, 2011, 12:39:38 PM

Quote from: Firerouge on May 29, 2011, 05:24:16 AM

Love it so much.

Using: -k phatk DEVICE=0 VECTORS BFI_INT FASTLOOP=false WORKSIZE=128 AGGRESSION=12 on a single 5870 950/330 I get a nice 410 Mhas/sec.

phatk works best with WORKSIZE=256. Getting 413 Mhash/s on both 5870 935/319 in a dual-card mining rig (w/o CrossFireX bridges).

Isn't 256 the max for a 5870, so the default value Phoenix uses anyway?

Firerouge

newbie

Activity: 4

Merit: 0

Quote from: icaci on May 29, 2011, 12:39:38 PM

Quote from: Firerouge on May 29, 2011, 05:24:16 AM

Love it so much.

Using: -k phatk DEVICE=0 VECTORS BFI_INT FASTLOOP=false WORKSIZE=128 AGGRESSION=12 on a single 5870 950/330 I get a nice 410 Mhas/sec.

phatk works best with WORKSIZE=256. Getting 413 Mhash/s on both 5870 935/319 in a dual-card mining rig (w/o CrossFireX bridges).

Wow thank you. You pushed me up to a nice 417.

icaci

newbie

Activity: 28

Merit: 0

Quote from: Firerouge on May 29, 2011, 05:24:16 AM

Love it so much.

Using: -k phatk DEVICE=0 VECTORS BFI_INT FASTLOOP=false WORKSIZE=128 AGGRESSION=12 on a single 5870 950/330 I get a nice 410 Mhas/sec.

phatk works best with WORKSIZE=256. Getting 413 Mhash/s on both 5870 935/319 in a dual-card mining rig (w/o CrossFireX bridges).

tiberiandusk

hero member

Activity: 575

Merit: 500

The North Remembers

Quote from: winnetou on May 29, 2011, 07:40:17 AM

Quote from: jimraynor on May 26, 2011, 03:52:44 PM

i did not make a smart ass reply

i didnt exactly know what you ment but i thought you ment i might of been mining with other software so i said i definately wasnt

i just extracted the zip and ran phoenix.exe and a cmd window pops up then instantly closes

you have to run it from the command line / cmd.

Here is what I do:

Figure out what pool address and flags you want to use.

Make a txt file in the Phoenix folder with the exe and put your flags etc into it. Save and close the txt file.

Change the .txt extension to .bat and run the bat file.

Profit.

winnetou

sr. member

Activity: 361

Merit: 250

Quote from: jimraynor on May 26, 2011, 03:52:44 PM

i did not make a smart ass reply

i didnt exactly know what you ment but i thought you ment i might of been mining with other software so i said i definately wasnt

i just extracted the zip and ran phoenix.exe and a cmd window pops up then instantly closes

you have to run it from the command line / cmd.

Firerouge

newbie

Activity: 4

Merit: 0

Love it so much.

Using: -k phatk DEVICE=0 VECTORS BFI_INT FASTLOOP=false WORKSIZE=128 AGGRESSION=12 on a single 5870 950/330 I get a nice 410 Mhas/sec.

super6

newbie

Activity: 28

Merit: 0

Is there a performance difference between phoenix for Linux and Win7? Is any distro better than another? I've got a 3x6990 system coming that I want to use as a dedicated miner so I want the most efficient setup possible. If there's no performance difference I'll probably go with Win7 because I'm more familiar with it.

m4rkiz

full member

Activity: 170

Merit: 100

Quote from: cande on May 27, 2011, 08:25:37 PM

i'm trying to run Phoenix on my CPU, which gives me:

Code:

FATAL kernel error: Failed to load OpenCL kernel!

is there a reason to this? is it not designed to run on CPUs? poclbm runs without any hassle on the CPU

cpu days are over, today you can get ~4.5 BTC with 2200 MH/s (my last 24h on deepbit with 7 gpus)

Core i7 920 will give you no more than 0.045 per 24h (and there is 2-3kWh that you need to pay for, which means that you are loosing money)
with mainstream Pentium E5400 it is around 0.0045 per 24h... you would cover a week of calculation simply by going to faucet Wink

disq

newbie

Activity: 41

Merit: 0

Here is the logtotext patch for the 1.48: https://github.com/disq/bitcoin-rug-monitor/blob/master/logtotext-1.48.diff

BOARBEAR

member

Activity: 77

Merit: 10

Phoenix does not work with intel opencl platform, is there any plan to support it in the future?

cande

member

Activity: 107

Merit: 10

https://bt.cx

Hey,

i'm trying to run Phoenix on my CPU, which gives me:

Code:

FATAL kernel error: Failed to load OpenCL kernel!

is there a reason to this? is it not designed to run on CPUs? poclbm runs without any hassle on the CPU

catch

newbie

Activity: 3

Merit: 0

Quote from: Aqualung on May 27, 2011, 01:50:18 AM

i started to use Sapphire 5830 with phoenix 1.48 a week ago and have no problems
i've downloaded only Catalyst Software Suite 56.7 MB 11.5 5/9/2011 from http://www.amd.com/ru/Pages/AMDHomePage.aspx - works fine
ps... thanks to author for great miner!

Did you have to run anything after it installed? Are you using Windows 7 32 bit? I'm running 64 bit and the only other thing I can think of is just doing a fresh install of Windows 7.

Kick

member

Activity: 112

Merit: 10

Quote from: catch on May 26, 2011, 06:00:50 PM

I just upgraded to a Sapphire Radeon 5830 a couple days ago and downloaded SDK 2.1 and the Catalyst driver package, I tried to run phoenix but the cmd window would blip and disappear. I was able to take a screenshot and I'm getting "ImportError: MemoryLoadLibrary failed failed loading pyopencl\_cl.pyd" I tried uninstalling and reinstalling the drivers, but it's still not working. Before, I was running a nividia GTS 250 with no problems.

This may be an easy fix, but I'm just feeling frustrated right now. I would appreciate any help!

look a few posts above you man.

http://forum.bitcoin.org/index.php?topic=6458.msg144610#msg144610

Aqualung

sr. member

Activity: 357

Merit: 250

i started to use Sapphire 5830 with phoenix 1.48 a week ago and have no problems
i've downloaded only Catalyst Software Suite 56.7 MB 11.5 5/9/2011 from http://www.amd.com/ru/Pages/AMDHomePage.aspx - works fine
ps... thanks to author for great miner!

catch

newbie

Activity: 3

Merit: 0

I just upgraded to a Sapphire Radeon 5830 a couple days ago and downloaded SDK 2.1 and the Catalyst driver package, I tried to run phoenix but the cmd window would blip and disappear. I was able to take a screenshot and I'm getting "ImportError: MemoryLoadLibrary failed failed loading pyopencl\_cl.pyd" I tried uninstalling and reinstalling the drivers, but it's still not working. Before, I was running a nividia GTS 250 with no problems.

This may be an easy fix, but I'm just feeling frustrated right now. I would appreciate any help!

jimraynor

newbie

Activity: 15

Merit: 0

i thought it might have to be in the bitcoin directory to work

bobR

member

Activity: 112

Merit: 10

Quote from: jimraynor on May 26, 2011, 04:15:59 PM

thanks, so do i need to put the phoenix files in C:\Program Files\Bitcoin\phoenix-1.48 for that to work?

or change where it actually is

Do you need computer lessons ?>?>?
HOW THINGS work

jimraynor

newbie

Activity: 15

Merit: 0

thanks, so do i need to put the phoenix files in C:\Program Files\Bitcoin\phoenix-1.48 for that to work?

EDIT: i just get "'C:Program' is not reconized as an internal or external command, operable program or batch file.

bobR

member

Activity: 112

Merit: 10

Quote from: jimraynor on May 26, 2011, 03:52:44 PM

i did not make a smart ass reply

i didnt exactly know what you ment but i thought you ment i might of been mining with other software so i said i definately wasnt

i just extracted the zip and ran phoenix.exe and a cmd window pops up then instantly closes

"C:\Program Files\Bitcoin\phoenix-1.48\phoenix.exe" -u http://Yourusername.worker:[email protected]:8332/;askrate=20 -v -q 1 -a 25 -k poclbm platform=0 DEVICE=0 AGGRESSION=7 FASTLOOP BFI_INT

twmz

hero member

Activity: 737

Merit: 500

Quote from: jimraynor on May 26, 2011, 03:52:44 PM

i just extracted the zip and ran phoenix.exe and a cmd window pops up then instantly closes

phoenix.exe can't be double clicked on. It has required command line parameters.

Open a cmd window manually, change the the folder with phoenix.exe and run it from there with the required command line parameters.

Topic: Phoenix - Efficient, fast, modular miner - page 29. (Read 760761 times)