PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 216.

hugomenezes

newbie

Activity: 6

Merit: 0

I had a issue with PhoenixMiner 5.1c
My Rig is:
CPU: G3930
RAM:; 16GB DDR4
HDD SSD240GB
GPU: 7x RX570 4GB
POOL: Coinotron

Issue: yesterday my rig making 175Mhash now today cannot start the miner, still 0mhash and says thread not responding.
Im use drivers AMD 27.20.12029.1000.

Regards!

sreetglide2011

newbie

Activity: 10

Merit: 0

Quote from: Littlegrand on November 10, 2020, 11:33:46 AM

Quote from: sreetglide2011 on November 10, 2020, 11:00:19 AM

Can someone help me imply the "-daglim 1 -dagrestart 1" to just my gpu12. I only have one 4gb card in my system and I dont want to limit the rest.

Is it even possible to do so?

start 2 pheonixminers one with the 8gb and one with just the 4gb

I was hoping there was a way to do in in a single instance or PM

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: SpeedY_Hun on November 10, 2020, 11:32:23 AM

My mixed rig with 3x P106, 4x1060 6Gb, 2xNitro RX580 8gb works well with 5.2a

Drivers:
20.8.1 and 456.38

Already 5.2b exists. Us it.

Littlegrand

jr. member

Activity: 104

Merit: 5

Quote from: sreetglide2011 on November 10, 2020, 11:00:19 AM

Can someone help me imply the "-daglim 1 -dagrestart 1" to just my gpu12. I only have one 4gb card in my system and I dont want to limit the rest.

Is it even possible to do so?

start 2 pheonixminers one with the 8gb and one with just the 4gb

SpeedY_Hun

newbie

Activity: 16

Merit: 0

My mixed rig with 3x P106, 4x1060 6Gb, 2xNitro RX580 8gb works well with 5.2a

Drivers:
20.8.1 and 456.38

sreetglide2011

newbie

Activity: 10

Merit: 0

Can someone help me imply the "-daglim 1 -dagrestart 1" to just my gpu12. I only have one 4gb card in my system and I dont want to limit the rest.

Is it even possible to do so?

ivanb82

newbie

Activity: 8

Merit: 0

Quote from: darbaslt on November 10, 2020, 06:05:25 AM

How to enable zil mining? I’m getting miner 5.2a or 5.2b crash when it goes to zil mining

I can confirm that both 5.2a and 5.2b are crashing when we have a Zilliqa mining round on ezil.me. The error is Unable to generate buffer (-61)

Can someone from the devs take a look at this please? The issue is with the small dag for Zilliqa , I guess.

Digital_Seytan

jr. member

Activity: 222

Merit: 2

[email protected]

Lolminer works very good teamedredminer works also to bat is is slow

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: vydelek on November 10, 2020, 01:30:37 AM

I'm testing a new version and unfortunately still the same problem!

The program turns on and turns off immediately :-(

2020.11.10:07:28:25.523: main Phoenix Miner 5.2b Windows/msvc - Release build
2020.11.10:07:28:25.523: main Cmd line: -pool eu1-etc.ethermine.org:4444 -wal adress.RIG-REPAIR -rmode 2 -tstop 75 -amd -daglim 1 -dagrestart 1 -eres 0 -rvram 0 -rxboost 1
2020.11.10:07:28:27.855: main OpenCL driver version: 17.8-BETA
2020.11.10:07:28:27.913: main Available GPUs for mining:
2020.11.10:07:28:27.913: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.11.10:07:28:27.913: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.11.10:07:28:27.913: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.11.10:07:28:27.913: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.11.10:07:28:27.913: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.11.10:07:28:27.913: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.11.10:07:28:27.913: main GPU7: Radeon RX 570 Series (pcie 9), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.11.10:07:28:27.913: main GPU8: Radeon RX 570 Series (pcie 11), OpenCL 2.0, 8 GB VRAM, 32 CUs
2020.11.10:07:28:27.913: main Increase the Windows page file size to at least 36 GB to avoid out of memory errors and unexpected crashes.

update your driver too

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: vydelek on November 10, 2020, 07:57:50 AM

IMPORTANT! All owners of AMD cards with 6 GB or 8 GB RAM must either keep drivers 20.4.x or lower (do not upgrade to 20.5.1 or later), or upgrade to PhoenixMiner 5.2b or later version to continue mining after DAG epoch 384 (ETC has already passed DAG epoch 384, and ETH will pass it in less than two months).

This means that for continue mining after DAG epoch 384:
1. If you want to use PM 5.1c you must either keep drivers 20.4.x or lower (do not upgrade to 20.5.1 or later)
2. If you want to upgrade your drivers to 20.5.1+ than upgrade to PhoenixMiner 5.2b or later version.

Other words:
PM 5.1c didn't mine DAG #384+ with new drivers, for mining with new drivers PM needs be 5.2b or later.

Just try to read more carefully.

vydelek

newbie

Activity: 73

Merit: 0

Quote from: UnclWish on November 10, 2020, 07:19:06 AM

Quote from: vydelek on November 10, 2020, 07:17:21 AM

Quote from: sxemini on November 10, 2020, 05:15:00 AM

Quote from: vydelek on November 10, 2020, 02:12:44 AM

Quote from: Azzgard1980 on November 09, 2020, 12:27:42 PM

win 10, adrenalin 20.4.2, 8rx578

Received: {"id":6,"jsonrpc":"2.0","result":true,"error":null}
2020.11.09:16:16:34.600: GPU4 GPU4: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:34.600: GPU4 GPU4: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:34.602: wdog Fatal error detected. Restarting.
2020.11.09:16:16:34.866: GPU3 GPU3: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:34.866: GPU3 GPU3: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:35.147: GPU7 GPU7: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:35.147: GPU7 GPU7: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:35.413: GPU5 GPU5: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:35.413: GPU5 GPU5: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:35.694: GPU1 GPU1: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:35.694: GPU1 GPU1: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:35.975: GPU6 GPU6: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:35.975: GPU6 GPU6: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:36.241: GPU8 GPU8: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:36.241: GPU8 GPU8: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:36.538: GPU2 GPU2: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:36.538: GPU2 GPU2: Allocating buffers failed with: clCreateBuffer (-61).

What can i do ?

I have exactly the same problem, I tested it on this driver and it didn't work and the BETA driver doesn't work either.

Lol, wrong commandline. I don´t know why you set so much variables in commandline, most of this you don´t need.

YOU SET WRONG COMMAND: -DAGLIM 1 is wrong, because it limits the dag size to 4006mb and the dag of etc is over (4010mb) this lol Roll Eyes

Commandline variables that you don´t need:

-eres 0
-rvram 0
-dagrestart 1

And by the way, update your driver

AMD cards with 6 GB or 8 GB RAM must either keep drivers 20.4.x or lower (do not upgrade to 20.5.1 or later) in PM

It's only for 5.1c version. For 5.2a-b drivers for 6-8Gb must be latest.

IMPORTANT! All owners of AMD cards with 6 GB or 8 GB RAM must either keep drivers 20.4.x or lower (do not upgrade to 20.5.1 or later), or upgrade to PhoenixMiner 5.2b or later version to continue mining after DAG epoch 384 (ETC has already passed DAG epoch 384, and ETH will pass it in less than two months).

Please where do you see it?
I read here that the DRIVER version is only up to 20.4.x or the latest SW 5.2b and more .... nowhere do I see anything about the driver of the larger version.

In my opinion, the driver has sufficient control! It will benefit on this driver!

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: vydelek on November 10, 2020, 07:17:21 AM

Quote from: sxemini on November 10, 2020, 05:15:00 AM

Quote from: vydelek on November 10, 2020, 02:12:44 AM

Quote from: Azzgard1980 on November 09, 2020, 12:27:42 PM

win 10, adrenalin 20.4.2, 8rx578

Received: {"id":6,"jsonrpc":"2.0","result":true,"error":null}
2020.11.09:16:16:34.600: GPU4 GPU4: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:34.600: GPU4 GPU4: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:34.602: wdog Fatal error detected. Restarting.
2020.11.09:16:16:34.866: GPU3 GPU3: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:34.866: GPU3 GPU3: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:35.147: GPU7 GPU7: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:35.147: GPU7 GPU7: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:35.413: GPU5 GPU5: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:35.413: GPU5 GPU5: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:35.694: GPU1 GPU1: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:35.694: GPU1 GPU1: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:35.975: GPU6 GPU6: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:35.975: GPU6 GPU6: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:36.241: GPU8 GPU8: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:36.241: GPU8 GPU8: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:36.538: GPU2 GPU2: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:36.538: GPU2 GPU2: Allocating buffers failed with: clCreateBuffer (-61).

What can i do ?

I have exactly the same problem, I tested it on this driver and it didn't work and the BETA driver doesn't work either.

Lol, wrong commandline. I don´t know why you set so much variables in commandline, most of this you don´t need.

YOU SET WRONG COMMAND: -DAGLIM 1 is wrong, because it limits the dag size to 4006mb and the dag of etc is over (4010mb) this lol Roll Eyes

Commandline variables that you don´t need:

-eres 0
-rvram 0
-dagrestart 1

And by the way, update your driver

AMD cards with 6 GB or 8 GB RAM must either keep drivers 20.4.x or lower (do not upgrade to 20.5.1 or later) in PM

It's only for 5.1c version. For 5.2a-b drivers for 6-8Gb must be latest.

vydelek

newbie

Activity: 73

Merit: 0

Quote from: sxemini on November 10, 2020, 05:15:00 AM

Quote from: vydelek on November 10, 2020, 02:12:44 AM

Quote from: Azzgard1980 on November 09, 2020, 12:27:42 PM

win 10, adrenalin 20.4.2, 8rx578

Received: {"id":6,"jsonrpc":"2.0","result":true,"error":null}
2020.11.09:16:16:34.600: GPU4 GPU4: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:34.600: GPU4 GPU4: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:34.602: wdog Fatal error detected. Restarting.
2020.11.09:16:16:34.866: GPU3 GPU3: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:34.866: GPU3 GPU3: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:35.147: GPU7 GPU7: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:35.147: GPU7 GPU7: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:35.413: GPU5 GPU5: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:35.413: GPU5 GPU5: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:35.694: GPU1 GPU1: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:35.694: GPU1 GPU1: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:35.975: GPU6 GPU6: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:35.975: GPU6 GPU6: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:36.241: GPU8 GPU8: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:36.241: GPU8 GPU8: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:36.538: GPU2 GPU2: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:36.538: GPU2 GPU2: Allocating buffers failed with: clCreateBuffer (-61).

What can i do ?

I have exactly the same problem, I tested it on this driver and it didn't work and the BETA driver doesn't work either.

Lol, wrong commandline. I don´t know why you set so much variables in commandline, most of this you don´t need.

YOU SET WRONG COMMAND: -DAGLIM 1 is wrong, because it limits the dag size to 4006mb and the dag of etc is over (4010mb) this lol Roll Eyes

Commandline variables that you don´t need:

-eres 0
-rvram 0
-dagrestart 1

And by the way, update your driver

AMD cards with 6 GB or 8 GB RAM must either keep drivers 20.4.x or lower (do not upgrade to 20.5.1 or later) in PM

raptorman

newbie

Activity: 24

Merit: 0

The New Teamredminer 0.7.17 speed is faster than Phoenixminer 5.2b with 1-2% for Ethereum Classic.

Please check Phoenix team and don't give up the hope. Tested with amd vega 64 adrenalin 19.4.3 driver.

darbaslt

newbie

Activity: 15

Merit: 0

How to enable zil mining? I’m getting miner 5.2a or 5.2b crash when it goes to zil mining

sxemini

member

Activity: 1558

Merit: 69

Quote from: vydelek on November 10, 2020, 02:12:44 AM

Quote from: Azzgard1980 on November 09, 2020, 12:27:42 PM

win 10, adrenalin 20.4.2, 8rx578

Received: {"id":6,"jsonrpc":"2.0","result":true,"error":null}
2020.11.09:16:16:34.600: GPU4 GPU4: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:34.600: GPU4 GPU4: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:34.602: wdog Fatal error detected. Restarting.
2020.11.09:16:16:34.866: GPU3 GPU3: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:34.866: GPU3 GPU3: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:35.147: GPU7 GPU7: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:35.147: GPU7 GPU7: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:35.413: GPU5 GPU5: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:35.413: GPU5 GPU5: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:35.694: GPU1 GPU1: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:35.694: GPU1 GPU1: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:35.975: GPU6 GPU6: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:35.975: GPU6 GPU6: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:36.241: GPU8 GPU8: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:36.241: GPU8 GPU8: Allocating buffers failed with: clCreateBuffer (-61).
2020.11.09:16:16:36.538: GPU2 GPU2: Allocating DAG (4.01) GB; good for epoch up to #2
2020.11.09:16:16:36.538: GPU2 GPU2: Allocating buffers failed with: clCreateBuffer (-61).

What can i do ?

I have exactly the same problem, I tested it on this driver and it didn't work and the BETA driver doesn't work either.

Lol, wrong commandline. I don´t know why you set so much variables in commandline, most of this you don´t need.

YOU SET WRONG COMMAND: -DAGLIM 1 is wrong, because it limits the dag size to 4006mb and the dag of etc is over (4010mb) this lol Roll Eyes

Commandline variables that you don´t need:

-eres 0
-rvram 0
-dagrestart 1

And by the way, update your driver

Alex55466452

newbie

Activity: 11

Merit: 0

I tried rig with 9 x RX580 4GB and 5.2b version and GPU 1 is still working and 0.000 speed, other are working ok. Any solution for that?

asnghost

sr. member

Activity: 258

Merit: 250

RavenCoin and in a few weeks you can mine Ethereum Classic again with cards under 4GB.

Quote from: Alex55466452 on November 10, 2020, 04:59:59 AM

What do you / will you guys mine with AMD RX570/580 4Gb these days...?

Alex55466452

newbie

Activity: 11

Merit: 0

What do you / will you guys mine with AMD RX570/580 4Gb these days...?

cas333

newbie

Activity: 52

Merit: 0

With new ver5.2b my rig still crashing. 9 gpu rig 5700 xt ,1300/1790

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 216. (Read 784965 times)