PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 225.

teomihsav

newbie

Activity: 72

Merit: 0

Quote from: bategojko74 on October 25, 2020, 11:52:44 AM

Quote from: teomihsav on October 25, 2020, 10:49:03 AM

Quote from: bategojko74 on October 25, 2020, 10:40:13 AM

Quote from: teomihsav on October 25, 2020, 09:42:32 AM

Quote from: GODLIKEE on October 24, 2020, 07:28:41 PM

Quote from: teomihsav on October 24, 2020, 02:48:12 PM

Guys I notice something. When dev fee is mined my hash rate jumps over 60Mh/s on each card. Apparantly dev apply some time straps and the result is great. My question is obvious. Is there a way to learn and apply this settings on beggining?

https://drive.google.com/file/d/1zm8aRWXbQsNReJSbuIQtDoYTkvAAI69Y/view?usp=sharing

how are you using that low voltage on the core , yet your power consumption remains very high

I'm ok with my wall power usage closer to 2kw for 12 - rx 5700. But please try to notice dev minning?

Obviously this is a bug in the calculation of the mining speed.

That can be one of the options, but is not enough for me as an answer.

I have 1 x rx 5700 and I can't reproduce your situation. Maybe this bug depends on the count of the GPUs.

Add this: -lidag 1 -hstats 2 -amd -acm -mode 1 -clKernel 1 -eres 0 -clNew 1 -clf 0 -mi 14 -mt 2 -gt 120

Check your log after two hours when dev mine and write me.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: dudee on October 25, 2020, 12:43:04 PM

8x580
phoenix 238mhs, clay 243mhs
why such difference? long time ago mined eth and phoenix was faster.

With Phoenix it's need to use AMD memory tweak tool to set REF parameter. Claymore can do this by -rxboost option. Phoenix not.

dudee

member

Activity: 99

Merit: 10

8x580
phoenix 238mhs, clay 243mhs
why such difference? long time ago mined eth and phoenix was faster.

bategojko74

member

Activity: 220

Merit: 12

Quote from: teomihsav on October 25, 2020, 10:49:03 AM

Quote from: bategojko74 on October 25, 2020, 10:40:13 AM

Quote from: teomihsav on October 25, 2020, 09:42:32 AM

Quote from: GODLIKEE on October 24, 2020, 07:28:41 PM

Quote from: teomihsav on October 24, 2020, 02:48:12 PM

Guys I notice something. When dev fee is mined my hash rate jumps over 60Mh/s on each card. Apparantly dev apply some time straps and the result is great. My question is obvious. Is there a way to learn and apply this settings on beggining?

https://drive.google.com/file/d/1zm8aRWXbQsNReJSbuIQtDoYTkvAAI69Y/view?usp=sharing

how are you using that low voltage on the core , yet your power consumption remains very high

I'm ok with my wall power usage closer to 2kw for 12 - rx 5700. But please try to notice dev minning?

Obviously this is a bug in the calculation of the mining speed.

That can be one of the options, but is not enough for me as an answer.

I have 1 x rx 5700 and I can't reproduce your situation. Maybe this bug depends on the count of the GPUs.

teomihsav

newbie

Activity: 72

Merit: 0

Quote from: bategojko74 on October 25, 2020, 10:40:13 AM

Quote from: teomihsav on October 25, 2020, 09:42:32 AM

Quote from: GODLIKEE on October 24, 2020, 07:28:41 PM

Quote from: teomihsav on October 24, 2020, 02:48:12 PM

Guys I notice something. When dev fee is mined my hash rate jumps over 60Mh/s on each card. Apparantly dev apply some time straps and the result is great. My question is obvious. Is there a way to learn and apply this settings on beggining?

https://drive.google.com/file/d/1zm8aRWXbQsNReJSbuIQtDoYTkvAAI69Y/view?usp=sharing

how are you using that low voltage on the core , yet your power consumption remains very high

I'm ok with my wall power usage closer to 2kw for 12 - rx 5700. But please try to notice dev minning?

Obviously this is a bug in the calculation of the mining speed.

That can be one of the options, but is not enough for me as an answer.

bategojko74

member

Activity: 220

Merit: 12

Quote from: teomihsav on October 25, 2020, 09:42:32 AM

Quote from: GODLIKEE on October 24, 2020, 07:28:41 PM

Quote from: teomihsav on October 24, 2020, 02:48:12 PM

Guys I notice something. When dev fee is mined my hash rate jumps over 60Mh/s on each card. Apparantly dev apply some time straps and the result is great. My question is obvious. Is there a way to learn and apply this settings on beggining?

https://drive.google.com/file/d/1zm8aRWXbQsNReJSbuIQtDoYTkvAAI69Y/view?usp=sharing

how are you using that low voltage on the core , yet your power consumption remains very high

I'm ok with my wall power usage closer to 2kw for 12 - rx 5700. But please try to notice dev minning?

Obviously this is a bug in the calculation of the mining speed.

teomihsav

newbie

Activity: 72

Merit: 0

Quote from: GODLIKEE on October 24, 2020, 07:28:41 PM

Quote from: teomihsav on October 24, 2020, 02:48:12 PM

Guys I notice something. When dev fee is mined my hash rate jumps over 60Mh/s on each card. Apparantly dev apply some time straps and the result is great. My question is obvious. Is there a way to learn and apply this settings on beggining?

https://drive.google.com/file/d/1zm8aRWXbQsNReJSbuIQtDoYTkvAAI69Y/view?usp=sharing

how are you using that low voltage on the core , yet your power consumption remains very high

I'm ok with my wall power usage closer to 2kw for 12 - rx 5700. But please try to notice dev minning?

teomihsav

newbie

Activity: 72

Merit: 0

Quote from: siegheil on October 24, 2020, 11:03:54 PM

@PhoenixMiner
Hi, please tell me where is the miner looking for the "reboot.sh" bash script for linux?
I see that when the reboot condition is triggered, the miner reports that it didn't find this script Undecided

Same with me. Will be happy if someone help.

siegheil

newbie

Activity: 1

Merit: 0

@PhoenixMiner
Hi, please tell me where is the miner looking for the "reboot.sh" bash script for linux?
I see that when the reboot condition is triggered, the miner reports that it didn't find this script Undecided

GODLIKEE

newbie

Activity: 26

Merit: 2

Quote from: teomihsav on October 24, 2020, 02:48:12 PM

Guys I notice something. When dev fee is mined my hash rate jumps over 60Mh/s on each card. Apparantly dev apply some time straps and the result is great. My question is obvious. Is there a way to learn and apply this settings on beggining?

https://drive.google.com/file/d/1zm8aRWXbQsNReJSbuIQtDoYTkvAAI69Y/view?usp=sharing

how are you using that low voltage on the core , yet your power consumption remains very high

teomihsav

newbie

Activity: 72

Merit: 0

Guys I notice something. When dev fee is mined my hash rate jumps over 60Mh/s on each card. Apparantly dev apply some time straps and the result is great. My question is obvious. Is there a way to learn and apply this settings on beggining?

https://drive.google.com/file/d/1zm8aRWXbQsNReJSbuIQtDoYTkvAAI69Y/view?usp=sharing

BogdanCo

hero member

Activity: 729

Merit: 513

@Permonik, @teomihsav and @waywoos please edit your posts and delete the links. It's an obvious scam. You can do with a Rx 470 8 Gb around 31 Mh/s, Vega around 50 Mh/s so why to install the ~~Pill~~ virus? The scammer spamming these mining threads with his posts is also a retard, as I can see....

dzyk

legendary

Activity: 1792

Merit: 1028

dzyk.ru

Quote from: adaseb on October 24, 2020, 10:00:05 AM

Quote from: dzyk on October 24, 2020, 07:06:08 AM

1660 6G + 4x1050ti 4G + ram 8G not work
Where 5.2 version?

You probably won't be able to mine with your 4GB Nvidia anymore. There was another individual here that had the same issue. If you are using Windows then try and switch to Linux and "maybe" it will work. Currently AMD cards still work under Linux for me but not Windows.

Another option is that there is another miner called lolminer and it basically allows you to mine past 4GB but with reduced speeds. Basically you can mine a 4.2GB DAG but with a 70% reduced speed. Basically not worth it then but for the first few DAGs past 4GB the speeds aren't that reduced. Maybe they made a version for Nvidia cards and yours should work so try that first. Its on the Mining (altcoins) section of bitcointalk.

I used linux. And crash eth mining several days ago( its no Phoenix problem(... its problem with 4gb cards

For alternative im switch 4 1050ti to RavenCoin with kawpow... 1660 with Eth paralleling work

adaseb

legendary

Activity: 3808

Merit: 1723

Quote from: dzyk on October 24, 2020, 07:06:08 AM

1660 6G + 4x1050ti 4G + ram 8G not work
Where 5.2 version?

You probably won't be able to mine with your 4GB Nvidia anymore. There was another individual here that had the same issue. If you are using Windows then try and switch to Linux and "maybe" it will work. Currently AMD cards still work under Linux for me but not Windows.

Another option is that there is another miner called lolminer and it basically allows you to mine past 4GB but with reduced speeds. Basically you can mine a 4.2GB DAG but with a 70% reduced speed. Basically not worth it then but for the first few DAGs past 4GB the speeds aren't that reduced. Maybe they made a version for Nvidia cards and yours should work so try that first. Its on the Mining (altcoins) section of bitcointalk.

dzyk

legendary

Activity: 1792

Merit: 1028

dzyk.ru

1660 6G + 4x1050ti 4G + ram 8G not work
Where 5.2 version?

Littlegrand

jr. member

Activity: 104

Merit: 5

Quote from: jgonzi on October 23, 2020, 03:42:07 PM

Quote from: Littlegrand on October 23, 2020, 07:36:36 AM

Quote from: jgonzi on October 23, 2020, 07:26:31 AM

Quote from: Littlegrand on October 23, 2020, 07:24:47 AM

Quote from: crypto.bin101 on October 23, 2020, 02:42:56 AM

Quote from: Bael on October 22, 2020, 11:11:25 PM

Hello

I want to configure a computer with linux, for my 4GB gpus (as long as they last) I have tried it with ubuntu 20.04.1 lts (the newest), I installed official drivers, the newest, but the miner does not even start xDD

In the end I used a pendrive with simplemining and it works, but I would like to have access to my own platform, as I have always done with windows.

Could someone give me some tips on what linux to use? And what drivers, I would be very grateful.

The truth is that linux I have used little, it has usually been in virtual machines to test the distribution and it is the first time that I face a serious installation and I am lost.

best regards!!! : )

Have you tried the good drivers from page 1.

Good drivers. These are versions from 18.12.1.1 to 19.7.5 (inclusive), and from 19.12.2 to 20.8.1 (inclusive). These will allow you to mine until DAG epoch 372-373 and won't need restart of PhoenixMiner on each DAG epoch change.

+1 would appreciate if someone share their setup

Those are windows drivers, you need the linux drivers. Use latest Ubuntu then use:

wget https://drivers.amd.com/drivers/linux/amdgpu-pro-20.30-1109583-ubuntu-20.04.tar.xz --referer https://support.amd.com

This gets the amd linux driver, then:

tar -Jxvf amdgpu-pro-20.30-1109583-ubuntu-20.04.tar.xz
cd amdgpu-pro-20.30-1109583-ubuntu-20.04/
./amdgpu-pro-install -y --opencl=legacy,rocm --headless

This extracts it, switches directory and installs it(2 commands)

You will wait forever for it to build the initial module and it will appear to lockup.

The big thing is you cannot run it off of 'try' Ubuntu, you have to install Ubuntu

With 20.30 you will not have the kernel gfx1010... and Hashrate will be very variable...

I havent tested long term yet on Linux as I need a fan control first for TRM but which version do you suggest?

Thanks

19.30 --opencl=pal,legacy,rocm

Thanks, I will try that when I get time. Phoenix will not start being unable to allocate dag(error61). TRM runs but locks up randomly(I tried lowering mem allocation and did not work). Any other advice such as the size of the swap file, size of the root partition etc?

Thanks

jgonzi

member

Activity: 639

Merit: 19

Quote from: Littlegrand on October 23, 2020, 07:36:36 AM

Quote from: jgonzi on October 23, 2020, 07:26:31 AM

Quote from: Littlegrand on October 23, 2020, 07:24:47 AM

Quote from: crypto.bin101 on October 23, 2020, 02:42:56 AM

Quote from: Bael on October 22, 2020, 11:11:25 PM

Hello

I want to configure a computer with linux, for my 4GB gpus (as long as they last) I have tried it with ubuntu 20.04.1 lts (the newest), I installed official drivers, the newest, but the miner does not even start xDD

In the end I used a pendrive with simplemining and it works, but I would like to have access to my own platform, as I have always done with windows.

Could someone give me some tips on what linux to use? And what drivers, I would be very grateful.

The truth is that linux I have used little, it has usually been in virtual machines to test the distribution and it is the first time that I face a serious installation and I am lost.

best regards!!! : )

Have you tried the good drivers from page 1.

Good drivers. These are versions from 18.12.1.1 to 19.7.5 (inclusive), and from 19.12.2 to 20.8.1 (inclusive). These will allow you to mine until DAG epoch 372-373 and won't need restart of PhoenixMiner on each DAG epoch change.

+1 would appreciate if someone share their setup

Those are windows drivers, you need the linux drivers. Use latest Ubuntu then use:

wget https://drivers.amd.com/drivers/linux/amdgpu-pro-20.30-1109583-ubuntu-20.04.tar.xz --referer https://support.amd.com

This gets the amd linux driver, then:

tar -Jxvf amdgpu-pro-20.30-1109583-ubuntu-20.04.tar.xz
cd amdgpu-pro-20.30-1109583-ubuntu-20.04/
./amdgpu-pro-install -y --opencl=legacy,rocm --headless

This extracts it, switches directory and installs it(2 commands)

You will wait forever for it to build the initial module and it will appear to lockup.

The big thing is you cannot run it off of 'try' Ubuntu, you have to install Ubuntu

With 20.30 you will not have the kernel gfx1010... and Hashrate will be very variable...

I havent tested long term yet on Linux as I need a fan control first for TRM but which version do you suggest?

Thanks

19.30 --opencl=pal,legacy,rocm

Littlegrand

jr. member

Activity: 104

Merit: 5

Quote from: jgonzi on October 23, 2020, 07:26:31 AM

Quote from: Littlegrand on October 23, 2020, 07:24:47 AM

Quote from: crypto.bin101 on October 23, 2020, 02:42:56 AM

Quote from: Bael on October 22, 2020, 11:11:25 PM

Hello

I want to configure a computer with linux, for my 4GB gpus (as long as they last) I have tried it with ubuntu 20.04.1 lts (the newest), I installed official drivers, the newest, but the miner does not even start xDD

In the end I used a pendrive with simplemining and it works, but I would like to have access to my own platform, as I have always done with windows.

Could someone give me some tips on what linux to use? And what drivers, I would be very grateful.

The truth is that linux I have used little, it has usually been in virtual machines to test the distribution and it is the first time that I face a serious installation and I am lost.

best regards!!! : )

Have you tried the good drivers from page 1.

Good drivers. These are versions from 18.12.1.1 to 19.7.5 (inclusive), and from 19.12.2 to 20.8.1 (inclusive). These will allow you to mine until DAG epoch 372-373 and won't need restart of PhoenixMiner on each DAG epoch change.

+1 would appreciate if someone share their setup

Those are windows drivers, you need the linux drivers. Use latest Ubuntu then use:

wget https://drivers.amd.com/drivers/linux/amdgpu-pro-20.30-1109583-ubuntu-20.04.tar.xz --referer https://support.amd.com

This gets the amd linux driver, then:

tar -Jxvf amdgpu-pro-20.30-1109583-ubuntu-20.04.tar.xz
cd amdgpu-pro-20.30-1109583-ubuntu-20.04/
./amdgpu-pro-install -y --opencl=legacy,rocm --headless

This extracts it, switches directory and installs it(2 commands)

You will wait forever for it to build the initial module and it will appear to lockup.

The big thing is you cannot run it off of 'try' Ubuntu, you have to install Ubuntu

With 20.30 you will not have the kernel gfx1010... and Hashrate will be very variable...

I havent tested long term yet on Linux as I need a fan control first for TRM but which version do you suggest?

Thanks

jgonzi

member

Activity: 639

Merit: 19

Quote from: Littlegrand on October 23, 2020, 07:24:47 AM

Quote from: crypto.bin101 on October 23, 2020, 02:42:56 AM

Quote from: Bael on October 22, 2020, 11:11:25 PM

Hello

I want to configure a computer with linux, for my 4GB gpus (as long as they last) I have tried it with ubuntu 20.04.1 lts (the newest), I installed official drivers, the newest, but the miner does not even start xDD

In the end I used a pendrive with simplemining and it works, but I would like to have access to my own platform, as I have always done with windows.

Could someone give me some tips on what linux to use? And what drivers, I would be very grateful.

The truth is that linux I have used little, it has usually been in virtual machines to test the distribution and it is the first time that I face a serious installation and I am lost.

best regards!!! : )

Have you tried the good drivers from page 1.

Good drivers. These are versions from 18.12.1.1 to 19.7.5 (inclusive), and from 19.12.2 to 20.8.1 (inclusive). These will allow you to mine until DAG epoch 372-373 and won't need restart of PhoenixMiner on each DAG epoch change.

+1 would appreciate if someone share their setup

Those are windows drivers, you need the linux drivers. Use latest Ubuntu then use:

wget https://drivers.amd.com/drivers/linux/amdgpu-pro-20.30-1109583-ubuntu-20.04.tar.xz --referer https://support.amd.com

This gets the amd linux driver, then:

tar -Jxvf amdgpu-pro-20.30-1109583-ubuntu-20.04.tar.xz
cd amdgpu-pro-20.30-1109583-ubuntu-20.04/
./amdgpu-pro-install -y --opencl=legacy,rocm --headless

This extracts it, switches directory and installs it(2 commands)

You will wait forever for it to build the initial module and it will appear to lockup.

The big thing is you cannot run it off of 'try' Ubuntu, you have to install Ubuntu

With 20.30 you will not have the kernel gfx1010... and Hashrate will be very variable...

Littlegrand

jr. member

Activity: 104

Merit: 5

Quote from: crypto.bin101 on October 23, 2020, 02:42:56 AM

Quote from: Bael on October 22, 2020, 11:11:25 PM

Hello

I want to configure a computer with linux, for my 4GB gpus (as long as they last) I have tried it with ubuntu 20.04.1 lts (the newest), I installed official drivers, the newest, but the miner does not even start xDD

In the end I used a pendrive with simplemining and it works, but I would like to have access to my own platform, as I have always done with windows.

Could someone give me some tips on what linux to use? And what drivers, I would be very grateful.

The truth is that linux I have used little, it has usually been in virtual machines to test the distribution and it is the first time that I face a serious installation and I am lost.

best regards!!! : )

Have you tried the good drivers from page 1.

Good drivers. These are versions from 18.12.1.1 to 19.7.5 (inclusive), and from 19.12.2 to 20.8.1 (inclusive). These will allow you to mine until DAG epoch 372-373 and won't need restart of PhoenixMiner on each DAG epoch change.

+1 would appreciate if someone share their setup

Those are windows drivers, you need the linux drivers. Use latest Ubuntu then use:

wget https://drivers.amd.com/drivers/linux/amdgpu-pro-20.30-1109583-ubuntu-20.04.tar.xz --referer https://support.amd.com

This gets the amd linux driver, then:

tar -Jxvf amdgpu-pro-20.30-1109583-ubuntu-20.04.tar.xz
cd amdgpu-pro-20.30-1109583-ubuntu-20.04/
./amdgpu-pro-install -y --opencl=legacy,rocm --headless

This extracts it, switches directory and installs it(2 commands)

You will wait forever for it to build the initial module and it will appear to lockup.

The big thing is you cannot run it off of 'try' Ubuntu, you have to install Ubuntu

Let me know how it goes, mine throws errors trying to build the dag and will not run(Phoenix) but TRM works great however will not control fan speed...

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 225. (Read 784965 times)