Just wait 3 minutes until gt is autotuned and your hashrate will be OK.
Nope. Look at the end of the Phoenix log.
Ok just wait 6 minutes than
Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 378. (Read 784958 times)
September 13, 2018, 07:57:44 AM
Just wait 3 minutes until gt is autotuned and your hashrate will be OK.
Nope. Look at the end of the Phoenix log.
Ok just wait 6 minutes than
September 13, 2018, 07:43:49 AM
Just wait 3 minutes until gt is autotuned and your hashrate will be OK.
Nope. Look at the end of the Phoenix log.
September 13, 2018, 07:39:42 AM
September 13, 2018, 07:14:31 AM
There is a new version for Windows and LInux: PhoenixMiner 3.5c
Good job!
Could you check RX550 4GB please? It mines 13,89Mh/s with Claymore on Ubuntu 16.04.4 amdgpu-pro 18.10. But with PhoenixMiner only 10,81Mh/s.
Claymore log:
Code:
14:40:38:037 418f7740 Check and remove old log files...
14:40:38:038 418f7740 args: -mport -3333 -r 1 -logfile /var/log/miner/claymore/lastrun_noappend.log -tt 68 -ttli 76 -tstop 82 -allpools 1 -mode 1 -di 3 -tt 1 -tt 1
14:40:38:038 418f7740
14:40:38:038 418f7740 ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
14:40:38:038 418f7740 є Claymore's Dual GPU Miner - v11.9 є
14:40:38:038 418f7740 є ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK є
14:40:38:038 418f7740 ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
14:40:38:038 418f7740
14:40:38:038 418f7740 b597
14:40:38:239 418f7740 no address specified - ignore
14:40:38:239 418f7740 ETH: 2 pools are specified
14:40:38:239 418f7740 Main Ethereum pool is eu-eth.hiveon.net:4444
14:40:38:426 418f7740 OpenCL platform: AMD Accelerated Parallel Processing
14:40:38:427 418f7740 OpenCL initializing...
14:40:38:427 418f7740 AMD Cards available: 4
14:40:38:428 418f7740 GPU #0: gfx804 (Radeon 500 Series), 4076 MB available, 8 compute units (pci bus 10:0:0)
14:40:38:428 418f7740 GPU #0 recognized as Radeon RX 550
14:40:38:428 418f7740 POOL/SOLO version
14:40:38:428 418f7740 Platform: Linux
14:40:38:505 418f7740 AMD ADL library not found.
14:40:38:519 418f7740 amdgpu cnt: 4
14:40:38:529 418f7740 start building OpenCL program for GPU 0...
14:40:38:992 418f7740 done
14:40:39:229 418f7740 GPU #0: algorithm ASM 1
14:40:39:229 418f7740 Total cards: 1
14:40:43:230 418f7740
You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.
14:40:44:230 418f7740 No NVIDIA cards in the list, NVML library will not be used.
14:40:44:267 33ca2700 ETH: Stratum - connecting to 'eu-eth.hiveon.net' <52.59.155.41> port 4444 (unsecure)
14:40:44:337 33ca2700 sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x95e9f66fdb534213f9245d89a297e6192ddcf400.RIG-0_1", "x"], "id": 2, "method": "eth_submitLogin"}
14:40:44:337 33ca2700 ETH: Stratum - Connected (eu-eth.hiveon.net:4444) (unsecure)
14:40:44:363 418f7740 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
14:40:44:363 418f7740 ETH: eth-proxy stratum mode
14:40:44:363 418f7740 "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
14:40:44:364 418f7740 Watchdog enabled
14:40:44:364 418f7740 Remote management (READ-ONLY MODE) is enabled on port 3333
14:40:44:364 418f7740
14:40:44:364 418f7740 You did not specify -dcri values directly, so they will be detected automatically
14:40:44:364 418f7740 Automatic detection of best -dcri values started, please wait...
14:40:44:418 33ca2700 buf: {"jsonrpc":"2.0","result":true,"id":2}
14:40:44:418 33ca2700 ETH: Authorized
14:40:44:418 33ca2700 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
14:40:44:488 33ca2700 buf: {"jsonrpc":"2.0","result":["0xbbdff2f95211510087b6cb4bcb9a241dbfc13451c468ee66db5fa4941b7c7857","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":3}
14:40:44:536 344a3700 Setting DAG epoch #210...
14:40:51:365 33ca2700 buf: { "jsonrpc":"2.0", "result": ["0x25f3f90938b66c1b830408f661bf86c186b82c0aca9e9cce7f008ce3e73ada47","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"] }
14:40:51:366 33ca2700 ETH: 09/13/18-14:40:51 - New job from eu-eth.hiveon.net:4444
14:40:51:366 33ca2700 target: 0x0000000112e0be82 (diff: 4000MH), epoch 210(2.64GB)
14:40:51:366 33ca2700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
14:40:51:366 33ca2700 ETH: GPU0 0.000 Mh/s
14:40:51:982 344a3700 Setting DAG epoch #210 for GPU0
14:40:51:982 344a3700 Create GPU buffer for GPU0
14:40:52:343 31301700 srv_thr cnt: 1, IP: 127.0.0.1
14:40:52:343 31301700 recv: 51
14:40:52:343 31301700 srv pck: 50
14:40:52:344 31301700 srv bs: 0
14:40:52:344 31301700 sent: 189
14:40:54:490 33ca2700 ETH: checking pool connection...
14:40:54:491 33ca2700 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
14:40:54:562 33ca2700 buf: {"jsonrpc":"2.0","result":["0x25f3f90938b66c1b830408f661bf86c186b82c0aca9e9cce7f008ce3e73ada47","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":3}
14:41:01:531 31301700 srv_thr cnt: 1, IP: 127.0.0.1
14:41:01:531 31301700 recv: 51
14:41:01:531 31301700 srv pck: 50
14:41:01:532 31301700 srv bs: 0
14:41:01:532 31301700 sent: 186
14:41:04:107 344a3700 GPU0 DAG creation time - 11877 ms
14:41:04:108 344a3700 Setting DAG epoch #210 for GPU0 done
14:41:04:490 33ca2700 sent: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xcecab4", "0x000000000000000000000000000000000000000000000000000000001a5695c0"]}
14:41:04:492 33ca2700 ETH: checking pool connection...
14:41:04:492 33ca2700 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
14:41:04:561 33ca2700 buf: {"jsonrpc":"2.0","result":true,"id":6}
14:41:04:631 33ca2700 buf: {"jsonrpc":"2.0","result":["0x25f3f90938b66c1b830408f661bf86c186b82c0aca9e9cce7f008ce3e73ada47","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":3}
14:41:08:260 3efdb700 GPU0 t=61C fan=100%, GPU1 t=51C fan=83%, GPU2 t=48C fan=90%, GPU3 t=48C fan=92%
14:41:08:295 3f7dc700 em hbt: 1, fm hbt: 11,
14:41:08:296 3f7dc700 watchdog - thread 0 (gpu0), hb time 175
14:41:08:296 3f7dc700 watchdog - thread 1 (gpu0), hb time 13
14:41:09:103 34ca4700 gd 0.62
14:41:09:190 33ca2700 buf: { "jsonrpc":"2.0", "result": ["0x26f865e6033ef572a07bd6ac21775198be1fd7bfe834cc00f6eecd4356f1f92b","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"] }
14:41:09:190 33ca2700 ETH: 09/13/18-14:41:09 - New job from eu-eth.hiveon.net:4444
14:41:09:190 33ca2700 target: 0x0000000112e0be82 (diff: 4000MH), epoch 210(2.64GB)
14:41:09:190 33ca2700 ETH - Total Speed: 12.651 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
14:41:09:191 33ca2700 ETH: GPU0 12.651 Mh/s
14:41:11:298 3f7dc700 GPU #0: apply best detected -dcri value: 14
14:41:11:298 3f7dc700 Automatic detection of best -dcri values completed
14:41:12:237 31301700 srv_thr cnt: 1, IP: 127.0.0.1
14:41:12:237 31301700 recv: 51
14:41:12:237 31301700 srv pck: 50
14:41:12:238 31301700 srv bs: 0
14:41:12:238 31301700 sent: 194
14:41:14:493 33ca2700 ETH: checking pool connection...
14:41:14:493 33ca2700 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
Phoenix log:
Code:
2018.09.13:14:52:05.620: main Phoenix Miner 3.5c Linux/gcc - Release build
2018.09.13:14:52:05.620: main Cmd line:
2018.09.13:14:52:05.620: main config.txt: -r 1 -logfile /var/log/miner/phoenixminer/lastrun_noappend.log -tt 68 -tstop 82 -allpools 1 -mport 3335 -gpus 4 -clgreen 1
2018.09.13:14:52:05.627: main Unable to enum CUDA GPUs: unknown error
2018.09.13:14:52:05.801: main OpenCL driver version: 18.10-572953
2018.09.13:14:52:05.801: main Available GPUs for mining:
2018.09.13:14:52:05.801: main GPU1: Radeon 500 Series (pcie 10), OpenCL 1.2, 4 GB VRAM, 8 CUs
2018.09.13:14:52:05.803: main AMD sysfs monitor initialized
2018.09.13:14:52:05.803: main Eth: the pool list contains 2 pools
2018.09.13:14:52:05.803: main Eth: primary pool: eu-eth.hiveon.net:4444
2018.09.13:14:52:05.803: main Starting GPU mining
2018.09.13:14:52:05.804: wdog Starting watchdog thread
2018.09.13:14:52:05.805: main Eth: Connecting to ethash pool eu-eth.hiveon.net:4444 (proto: EthProxy)
2018.09.13:14:52:05.951: eths Eth: Connected to ethash pool eu-eth.hiveon.net:4444 (3.120.72.4)
2018.09.13:14:52:05.951: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["0x95e9f66fdb534213f9245d89a297e6192ddcf400.RIG-0","x"]}
2018.09.13:14:52:06.006: main Listening for CDM remote manager at port 3335 in full mode
2018.09.13:14:52:06.006: main GPU1: 53C 100%
2018.09.13:14:52:06.017: eths Eth: Received: {"jsonrpc":"2.0","result":true,"id":1}
2018.09.13:14:52:06.017: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2018.09.13:14:52:06.083: eths Eth: Received: {"jsonrpc":"2.0","result":["0x0728212742e73a4d55deb3191369754c954f0b957b9d8cf8ff273cc7e68fb774","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":5}
2018.09.13:14:52:06.083: eths Eth: New job #07282127 from eu-eth.hiveon.net:4444; diff: 4000MH
2018.09.13:14:52:06.083: GPU1 GPU1: Starting up... (0)
2018.09.13:14:52:06.084: GPU1 Eth: Generating light cache for epoch #210
2018.09.13:14:52:08.303: eths Eth: Received: { "jsonrpc":"2.0", "result": ["0x79dbb4b5a038abb778cee3c36e42411247e8eae5ee7ab999fd95fdcf8019db8b","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"] }
2018.09.13:14:52:08.303: eths Eth: New job #79dbb4b5 from eu-eth.hiveon.net:4444; diff: 4000MH
2018.09.13:14:52:10.824: GPU1 The option -clGreen 1 is ignored for GPU1
2018.09.13:14:52:10.825: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2018.09.13:14:52:10.833: GPU1 GPU1: Using new optimized OpenCL kernels (device name 'gfx804')
2018.09.13:14:52:10.833: GPU1 GPU1: Allocating DAG (2.66) GB; good for epoch up to #212
2018.09.13:14:52:10.833: GPU1 GPU1: Allocating light cache buffer (42.5) MB; good for epoch up to #212
2018.09.13:14:52:11.081: GPU1 GPU1: Generating DAG for epoch #210
2018.09.13:14:52:12.594: GPU1 GPU1: DAG 13%
2018.09.13:14:52:14.820: GPU1 GPU1: DAG 31%
2018.09.13:14:52:15.838: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2018.09.13:14:52:15.951: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2018.09.13:14:52:16.017: eths Eth: Received: {"jsonrpc":"2.0","result":["0x79dbb4b5a038abb778cee3c36e42411247e8eae5ee7ab999fd95fdcf8019db8b","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":5}
2018.09.13:14:52:16.173: eths Eth: Received: { "jsonrpc":"2.0", "result": ["0xabafa6d300778019db6e96a1ca3d7c6229933e0ddcbb39a28af7123ae10d3d03","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"] }
2018.09.13:14:52:16.173: eths Eth: New job #abafa6d3 from eu-eth.hiveon.net:4444; diff: 4000MH
2018.09.13:14:52:17.046: GPU1 GPU1: DAG 50%
2018.09.13:14:52:19.271: GPU1 GPU1: DAG 69%
2018.09.13:14:52:20.851: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2018.09.13:14:52:21.498: GPU1 GPU1: DAG 88%
2018.09.13:14:52:22.982: GPU1 GPU1: DAG generated in 11.9 s (227.2 MB/s)
2018.09.13:14:52:22.983: GPU1 GPU1: no gt value specified, switching to auto-tune
2018.09.13:14:52:22.983: GPU1 GPU1: starting auto-tune process
2018.09.13:14:52:25.864: main Eth speed: 5.558 MH/s, shares: 0/0/0, time: 0:00
2018.09.13:14:52:25.951: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2018.09.13:14:52:25.951: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x54d0b3","0x8004b304ddc95e58797f2041afc6b6525e249fb9d4b0f646cd37c4cdbec781e4"]}
2018.09.13:14:52:26.018: eths Eth: Received: {"jsonrpc":"2.0","result":["0xabafa6d300778019db6e96a1ca3d7c6229933e0ddcbb39a28af7123ae10d3d03","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":5}
2018.09.13:14:52:26.019: eths Eth: Received: {"jsonrpc":"2.0","result":true,"id":6}
2018.09.13:14:52:28.190: eths Eth: Received: { "jsonrpc":"2.0", "result": ["0x4b83044ef484552f10dda9ee8e6bb69d9c619834133bbcf39bcbdf7d197fa373","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"] }
2018.09.13:14:52:28.190: eths Eth: New job #4b83044e from eu-eth.hiveon.net:4444; diff: 4000MH
2018.09.13:14:52:30.876: main Eth speed: 6.499 MH/s, shares: 0/0/0, time: 0:00
2018.09.13:14:52:32.315: eths Eth: Received: { "jsonrpc":"2.0", "result": ["0xf6db12bb8f7f4369f194090b4cf6241b3b77e452e0520d2448595a12fec48a5f","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"] }
2018.09.13:14:52:32.315: eths Eth: New job #f6db12bb from eu-eth.hiveon.net:4444; diff: 4000MH
2018.09.13:14:52:33.885: main GPU1: 53C 100%
2018.09.13:14:52:35.890: main Eth speed: 5.774 MH/s, shares: 0/0/0, time: 0:00
2018.09.13:14:52:35.952: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2018.09.13:14:52:36.018: eths Eth: Received: {"jsonrpc":"2.0","result":["0xf6db12bb8f7f4369f194090b4cf6241b3b77e452e0520d2448595a12fec48a5f","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":5}
2018.09.13:14:52:40.903: main Eth speed: 5.217 MH/s, shares: 0/0/0, time: 0:00
2018.09.13:14:52:43.810: eths Eth: Received: { "jsonrpc":"2.0", "result": ["0x1dd8db4484914b7405bbd278b196ad6adcedea9e079b0f8038ad6c6f9779d67c","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"] }
2018.09.13:14:52:43.810: eths Eth: New job #1dd8db44 from eu-eth.hiveon.net:4444; diff: 4000MH
2018.09.13:14:52:44.541: eths Eth: Received: { "jsonrpc":"2.0", "result": ["0x68489f0953eb9789fe5021aefd1f27e788aec392d332db11b88f20b65545bfe6","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"] }
2018.09.13:14:52:44.542: eths Eth: New job #68489f09 from eu-eth.hiveon.net:4444; diff: 4000MH
2018.09.13:14:52:45.917: main Eth speed: 6.117 MH/s, shares: 0/0/0, time: 0:00
2018.09.13:14:52:45.952: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2018.09.13:14:52:45.952: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x5d4658","0x8004b304ddc95e58797f2041afc6b6525e249fb9d4b0f646cd37c4cdbec781e4"]}
2018.09.13:14:52:46.018: eths Eth: Received: {"jsonrpc":"2.0","result":["0x68489f0953eb9789fe5021aefd1f27e788aec392d332db11b88f20b65545bfe6","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":5}
2018.09.13:14:52:46.019: eths Eth: Received: {"jsonrpc":"2.0","result":true,"id":6}
2018.09.13:14:52:50.930: main
2018.09.13:14:52:50.930: main *** 0:00 *** 9/13 14:52 **************************************
2018.09.13:14:52:50.935: main Eth: Mining ETH on eu-eth.hiveon.net:4444 for 0:00
2018.09.13:14:52:50.935: main Eth speed: 7.506 MH/s, shares: 0/0/0, time: 0:00
2018.09.13:14:52:50.935: main 1 GPU(s) are auto-tuning. Hashrate may be low until they are ready.
2018.09.13:14:52:50.935: main Eth: Accepted shares 0 (0 stales), rejected shares 0 (0 stales)
2018.09.13:14:52:50.935: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2018.09.13:14:52:50.935: main Eth: Average speed (5 min): 6.533 MH/s
2018.09.13:14:52:50.935: main
2018.09.13:14:52:55.949: main Eth speed: 8.484 MH/s, shares: 0/0/0, time: 0:00
2018.09.13:14:52:55.952: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2018.09.13:14:52:56.018: eths Eth: Received: {"jsonrpc":"2.0","result":["0x68489f0953eb9789fe5021aefd1f27e788aec392d332db11b88f20b65545bfe6","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":5}
2018.09.13:14:53:00.962: main Eth speed: 9.015 MH/s, shares: 0/0/0, time: 0:00
2018.09.13:14:53:01.965: main GPU1: 55C 93%
2018.09.13:14:53:05.952: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2018.09.13:14:53:05.952: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x6df908","0x8004b304ddc95e58797f2041afc6b6525e249fb9d4b0f646cd37c4cdbec781e4"]}
2018.09.13:14:53:05.975: main Eth speed: 9.589 MH/s, shares: 0/0/0, time: 0:01
2018.09.13:14:53:06.018: eths Eth: Received: {"jsonrpc":"2.0","result":["0x68489f0953eb9789fe5021aefd1f27e788aec392d332db11b88f20b65545bfe6","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":5}
2018.09.13:14:53:06.019: eths Eth: Received: {"jsonrpc":"2.0","result":true,"id":6}
2018.09.13:14:53:10.988: main Eth speed: 10.078 MH/s, shares: 0/0/0, time: 0:01
2018.09.13:14:53:15.952: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2018.09.13:14:53:16.003: main Eth speed: 10.339 MH/s, shares: 0/0/0, time: 0:01
2018.09.13:14:53:16.018: eths Eth: Received: {"jsonrpc":"2.0","result":["0x68489f0953eb9789fe5021aefd1f27e788aec392d332db11b88f20b65545bfe6","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":5}
2018.09.13:14:53:21.016: main Eth speed: 10.549 MH/s, shares: 0/0/0, time: 0:01
2018.09.13:14:53:25.952: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2018.09.13:14:53:25.952: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x7f26bf","0x8004b304ddc95e58797f2041afc6b6525e249fb9d4b0f646cd37c4cdbec781e4"]}
2018.09.13:14:53:26.019: eths Eth: Received: {"jsonrpc":"2.0","result":["0x68489f0953eb9789fe5021aefd1f27e788aec392d332db11b88f20b65545bfe6","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":5}
2018.09.13:14:53:26.019: eths Eth: Received: {"jsonrpc":"2.0","result":true,"id":6}
2018.09.13:14:53:26.029: main Eth speed: 10.704 MH/s, shares: 0/0/0, time: 0:01
2018.09.13:14:53:29.839: main GPU1: 56C 95%
2018.09.13:14:53:31.042: main Eth speed: 10.774 MH/s, shares: 0/0/0, time: 0:01
2018.09.13:14:53:35.952: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2018.09.13:14:53:36.019: eths Eth: Received: {"jsonrpc":"2.0","result":["0x68489f0953eb9789fe5021aefd1f27e788aec392d332db11b88f20b65545bfe6","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":5}
2018.09.13:14:53:36.055: main
2018.09.13:14:53:36.055: main *** 0:01 *** 9/13 14:53 **************************************
2018.09.13:14:53:36.060: main Eth: Mining ETH on eu-eth.hiveon.net:4444 for 0:01
2018.09.13:14:53:36.060: main Eth speed: 10.802 MH/s, shares: 0/0/0, time: 0:01
2018.09.13:14:53:36.060: main 1 GPU(s) are auto-tuning. Hashrate may be low until they are ready.
2018.09.13:14:53:36.060: main Eth: Accepted shares 0 (0 stales), rejected shares 0 (0 stales)
2018.09.13:14:53:36.060: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2018.09.13:14:53:36.060: main Eth: Average speed (5 min): 8.867 MH/s
2018.09.13:14:53:36.060: main Eth: Effective speed: 0.00 MH/s; at pool: 0.00 MH/s
2018.09.13:14:53:36.060: main
2018.09.13:14:53:41.073: main Eth speed: 10.814 MH/s, shares: 0/0/0, time: 0:01
2018.09.13:14:53:45.953: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2018.09.13:14:53:45.953: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x891b07","0x8004b304ddc95e58797f2041afc6b6525e249fb9d4b0f646cd37c4cdbec781e4"]}
2018.09.13:14:53:46.019: eths Eth: Received: {"jsonrpc":"2.0","result":["0x68489f0953eb9789fe5021aefd1f27e788aec392d332db11b88f20b65545bfe6","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":5}
2018.09.13:14:53:46.020: eths Eth: Received: {"jsonrpc":"2.0","result":true,"id":6}
2018.09.13:14:53:46.087: main Eth speed: 10.813 MH/s, shares: 0/0/0, time: 0:01
2018.09.13:14:53:51.099: main Eth speed: 10.817 MH/s, shares: 0/0/0, time: 0:01
2018.09.13:14:53:55.953: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2018.09.13:14:53:56.019: eths Eth: Received: {"jsonrpc":"2.0","result":["0x68489f0953eb9789fe5021aefd1f27e788aec392d332db11b88f20b65545bfe6","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":5}
2018.09.13:14:53:56.113: main Eth speed: 10.743 MH/s, shares: 0/0/0, time: 0:01
2018.09.13:14:53:57.918: main GPU1: 57C 97%
2018.09.13:14:54:01.126: main Eth speed: 10.742 MH/s, shares: 0/0/0, time: 0:01
2018.09.13:14:54:05.953: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2018.09.13:14:54:05.953: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x8e7404","0x8004b304ddc95e58797f2041afc6b6525e249fb9d4b0f646cd37c4cdbec781e4"]}
2018.09.13:14:54:06.019: eths Eth: Received: {"jsonrpc":"2.0","result":["0x68489f0953eb9789fe5021aefd1f27e788aec392d332db11b88f20b65545bfe6","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":5}
2018.09.13:14:54:06.020: eths Eth: Received: {"jsonrpc":"2.0","result":true,"id":6}
2018.09.13:14:54:06.139: main Eth speed: 10.724 MH/s, shares: 0/0/0, time: 0:02
2018.09.13:14:54:09.255: eths Eth: Received: { "jsonrpc":"2.0", "result": ["0x74d2154dc88638516a2e3c14202ad332ca017bb66d4528dd3d31062d4f064792","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"] }
2018.09.13:14:54:09.255: eths Eth: New job #74d2154d from eu-eth.hiveon.net:4444; diff: 4000MH
2018.09.13:14:54:11.152: main Eth speed: 10.771 MH/s, shares: 0/0/0, time: 0:02
2018.09.13:14:54:11.609: eths Eth: Received: { "jsonrpc":"2.0", "result": ["0xcbaf53e088fa2e977fe55b80d9d43b673561c7fd66373b9e135cc9645f9e2126","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"] }
2018.09.13:14:54:11.609: eths Eth: New job #cbaf53e0 from eu-eth.hiveon.net:4444; diff: 4000MH
2018.09.13:14:54:14.570: GPU1 GPU1: auto-tune found best GT value 8
2018.09.13:14:54:15.953: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2018.09.13:14:54:16.019: eths Eth: Received: {"jsonrpc":"2.0","result":["0xcbaf53e088fa2e977fe55b80d9d43b673561c7fd66373b9e135cc9645f9e2126","0x25429eb7b5f60b19e6dd5b5dfd0ebf8bf6a8552b54f7944bb55821af378c81fa","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"],"id":5}
2018.09.13:14:54:16.166: main Eth speed: 10.754 MH/s, shares: 0/0/0, time: 0:02
2018.09.13:14:54:21.179: main
2018.09.13:14:54:21.179: main *** 0:02 *** 9/13 14:54 **************************************
2018.09.13:14:54:21.184: main Eth: Mining ETH on eu-eth.hiveon.net:4444 for 0:02
2018.09.13:14:54:21.184: main Eth speed: 10.768 MH/s, shares: 0/0/0, time: 0:02
2018.09.13:14:54:21.184: main Eth: Accepted shares 0 (0 stales), rejected shares 0 (0 stales)
2018.09.13:14:54:21.184: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2018.09.13:14:54:21.184: main Eth: Average speed (5 min): 9.590 MH/s
2018.09.13:14:54:21.184: main Eth: Effective speed: 0.00 MH/s; at pool: 0.00 MH/s
2018.09.13:14:54:21.184: main
2018.09.13:14:54:25.953: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2018.09.13:14:54:25.953: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xa508da","0x8004b304ddc95e58797f2041afc6b6525e249fb9d4b0f646cd37c4cdbec781e4"]}
September 13, 2018, 06:21:54 AM
Could you please tell us the version of HiveOS? We will try to install it here and reproduce it.
The latest - 0.5-74Here is the output when I run 'miner config'. Does the lower user config area seem correct?
Code:
=== /hive/custom/phoenixminer/config.txt =================================================
#DONT EDIT THIS FILE, IT WILL BE OVERWTITTEN AFTER UPDATE
#Management port, readonly
-mport -3333
#run reboot.sh on GPU hangs
-r 1
#Log to the same file
-logfile /var/log/miner/phoenixminer/lastrun_noappend.log
#Target temp
-tt 68
#stop GPU temperature
-tstop 82
-allpools 1
-mport 3335
### USER CONFIG ###
-clgreen 1
-tt 0,0,69,69,69,69
The other issue I am having is the lack of temperature and fan speed detection by phoenix miner. Sometimes after a restart it works. Other times it just shows 0.
https://i.imgur.com/ZAM9OFy.jpg
Also as you can see, I set the -tt of the cards to 69. But these values seem to be ignored.
September 13, 2018, 04:57:44 AM
Now PhoenixMiner 3.5c is working without that "ERROR: Debugger found" error. Thank you!
I will create a pull request for https://github.com/rainbowminer/RainbowMiner, so that they integrate the new version as soon as possible.
Did you ever check it together with OhGodAnEthlargmentPill on GTX1080Ti? Does it crash or will it work?
borox
thx got it !
BTW for the DEV: found a bug. If you let autotune, it will find the best value for each card, but I still can use +/- to change these values. If I try to change them, it will just set all the cards to the value of the first card instead of adding/subtracting to each value.
You can manually change the GT for a specific card by first pressing the x key to select the GPU and then using +/- will affect only the selected GPU. Note that using this method, you can also run auto-tune on specific GPU - if you select a GPU with x, and then when you press z, it will start auto-tune only for the selected GPU. Finally, by pressing x again you can go back to adjusting the GT for all GPUs at the same time.BTW for the DEV: found a bug. If you let autotune, it will find the best value for each card, but I still can use +/- to change these values. If I try to change them, it will just set all the cards to the value of the first card instead of adding/subtracting to each value.
Would be nice to see progpow implementation.
We are definitely onboard with ProgPOW but for now there is no consensus when (or even if) it will be accepted. Even if the proposal is rejected by the ETH developers however, if there is enough interest, we will definitely provide it as an option.@Pheonixminer Pls fix -tt function, works so badly with many cards.(Asus Strix rx580 8gb, XFX rx570 8gb, Asus Strix Vega 64)
Sorry about that, could you please tells how it behaves and how you would you like it to. From the aforementioned cards the support is probably worst for the Vega, but we will improve it in the next release.3.5c fixed my issues, thank you
Thank you for letting us know.testing it now...
At least it detects the driver properly now, so it should work better.Code:
2018.09.12:20:04:41.378: main Phoenix Miner 3.5c Linux/gcc - Release build
...
2018.09.12:20:04:41.427: main OpenCL driver version: 17.50-511655
...
rx 570
phoenixminer-3.5_c
Unable to open log file /var/log/miner/phoenixminer/lastrun_noappend.log - 2
No OpenCL platforms found
No avaiable GPUs for mining. Please check your drivers and/or hardware.
custom phoenixminer exited, waiting to cooldown a bit
amdgpu-pro driver 18.20-606296
Ubuntu 18.04 LTS
Linux Kernel 4.15.0-33-generic
Thank you for the report, we will use 18.04 LTS to see if we could reproduce it. It seems that the OpenCL driver can't be loaded at all.phoenixminer-3.5_c
Unable to open log file /var/log/miner/phoenixminer/lastrun_noappend.log - 2
No OpenCL platforms found
No avaiable GPUs for mining. Please check your drivers and/or hardware.
custom phoenixminer exited, waiting to cooldown a bit
amdgpu-pro driver 18.20-606296
Ubuntu 18.04 LTS
Linux Kernel 4.15.0-33-generic
I've managed to set everything up and I went from 183.6 to 186.6 with around the same power usage.
Sometimes when changing config or when restarting the rig I have an issue.
Mining working:
Config Change with phoenixminer restarting:
After this nothing happens. Restarting phoenixminer doesn't seem to work - as the same sequence of events happen. Restarting the entire rig works most of the time.
Edit: I'm using HiveOS which could be the issue since it's not officially supported.
Could you please tell us the version of HiveOS? We will try to install it here and reproduce it.Sometimes when changing config or when restarting the rig I have an issue.
Mining working:
Code:
Eth speed: 186.634 MH/s, shares: 130/0/0, time: 0:44
GPUs: 1: 33.274 MH/s (25) 2: 33.700 MH/s (20) 3: 30.380 MH/s (18) 4: 28.789 MH/s (18) 5: 30.340 MH/s (28) 6: 30.151 MH/s (21)
Config Change with phoenixminer restarting:
Code:
phoenixminer
http://download.hiveos.farm/custom/phoenixminer-3.5_c.tar.gz
Already installed
Creating epools.txt
Appending user config
Phoenix Miner 3.5c Linux/gcc - Release build
--------------------------------------------
After this nothing happens. Restarting phoenixminer doesn't seem to work - as the same sequence of events happen. Restarting the entire rig works most of the time.
Edit: I'm using HiveOS which could be the issue since it's not officially supported.
September 13, 2018, 04:32:14 AM
cool , i will try it
September 13, 2018, 04:04:59 AM
I've managed to set everything up and I went from 183.6 to 186.6 with around the same power usage.
Sometimes when changing config or when restarting the rig I have an issue.
Mining working:
Config Change with phoenixminer restarting:
After this nothing happens. Restarting phoenixminer doesn't seem to work - as the same sequence of events happen. Restarting the entire rig works most of the time.
Edit: I'm using HiveOS which could be the issue since it's not officially supported.
Sometimes when changing config or when restarting the rig I have an issue.
Mining working:
Code:
Eth speed: 186.634 MH/s, shares: 130/0/0, time: 0:44
GPUs: 1: 33.274 MH/s (25) 2: 33.700 MH/s (20) 3: 30.380 MH/s (18) 4: 28.789 MH/s (18) 5: 30.340 MH/s (28) 6: 30.151 MH/s (21)
Config Change with phoenixminer restarting:
Code:
phoenixminer
http://download.hiveos.farm/custom/phoenixminer-3.5_c.tar.gz
Already installed
Creating epools.txt
Appending user config
Phoenix Miner 3.5c Linux/gcc - Release build
--------------------------------------------
After this nothing happens. Restarting phoenixminer doesn't seem to work - as the same sequence of events happen. Restarting the entire rig works most of the time.
Edit: I'm using HiveOS which could be the issue since it's not officially supported.
September 12, 2018, 10:43:27 PM
There is a new version for Windows and LInux: PhoenixMiner 3.5c, which can be downloaded from here:
https://mega.nz/#F!WVlQRQjC!h-hLccC0zE9r-WAvwgdFkA (MEGA)
~
https://mega.nz/#F!WVlQRQjC!h-hLccC0zE9r-WAvwgdFkA (MEGA)
~
The link is in the post quoted above.
Thank you!
September 12, 2018, 10:38:52 PM
rx 570
phoenixminer-3.5_c
Unable to open log file /var/log/miner/phoenixminer/lastrun_noappend.log - 2
No OpenCL platforms found
No avaiable GPUs for mining. Please check your drivers and/or hardware.
custom phoenixminer exited, waiting to cooldown a bit
amdgpu-pro driver 18.20-606296
Ubuntu 18.04 LTS
Linux Kernel 4.15.0-33-generic
phoenixminer-3.5_c
Unable to open log file /var/log/miner/phoenixminer/lastrun_noappend.log - 2
No OpenCL platforms found
No avaiable GPUs for mining. Please check your drivers and/or hardware.
custom phoenixminer exited, waiting to cooldown a bit
amdgpu-pro driver 18.20-606296
Ubuntu 18.04 LTS
Linux Kernel 4.15.0-33-generic
September 12, 2018, 10:36:26 PM
There is a new version for Windows and LInux: PhoenixMiner 3.5c, which can be downloaded from here:
https://mega.nz/#F!WVlQRQjC!h-hLccC0zE9r-WAvwgdFkA (MEGA)
~
https://mega.nz/#F!WVlQRQjC!h-hLccC0zE9r-WAvwgdFkA (MEGA)
~
The link is in the post quoted above.
September 12, 2018, 10:23:57 PM
I'm sorry if I missed the reply somewhere on this thread, but is there a link to github or MEGA for the 3.5c build for Windows or is that just for Linux only?
September 12, 2018, 10:09:05 PM
Code:
File: PhoenixMiner_3.5c_Linux.tar.gz
====================================
SHA-1: 507c0a69d734519e74e11c89a457d69ce2445106
SHA-256: 72b4b78fc09770c43a6869923d6bb729571e20aa81da1ccaf8f21392e2d5a7db
SHA-512: 60505a339be0828f436354906b38bb42ab8c958f2070ef42058015409e5774eb4c4f914b722e055f0c443fd18138e370ddaf277b69ac6a0e07e74569fa7656aa
Version 3.5c fixes the problems that were discovered during the beta-testing of 3.5a and 3.5b, including the following:
* Fixed freezing problems immediately after GPU are recognized
* Fixed hardware monitoring problem under Linux with more than 6 GPUs
* Fixed problems under Linux with unrecognized drivers and stale share increases
testing it now...
Code:
2018.09.12:20:04:41.378: main Phoenix Miner 3.5c Linux/gcc - Release build
2018.09.12:20:04:41.378: main Cmd line:
2018.09.12:20:04:41.378: main config.txt: -mport -3333 -r 1 -logfile /var/log/miner/phoenixminer/lastrun_noappend.log -tt 0
2018.09.12:20:04:41.380: main Unable to enum CUDA GPUs: unknown error
2018.09.12:20:04:41.427: main OpenCL driver version: 17.50-511655
2018.09.12:20:04:41.427: main Available GPUs for mining:
2018.09.12:20:04:41.427: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 1.2, 8 GB VRAM, 32 CUs
2018.09.12:20:04:41.427: main GPU2: Radeon RX 580 Series (pcie 2), OpenCL 1.2, 8 GB VRAM, 36 CUs
2018.09.12:20:04:41.427: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 1.2, 8 GB VRAM, 32 CUs
2018.09.12:20:04:41.427: main GPU4: Radeon RX 580 Series (pcie 4), OpenCL 1.2, 8 GB VRAM, 36 CUs
2018.09.12:20:04:41.427: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 1.2, 8 GB VRAM, 32 CUs
2018.09.12:20:04:41.427: main GPU6: Radeon RX 570 Series (pcie 7), OpenCL 1.2, 8 GB VRAM, 32 CUs
2018.09.12:20:04:41.427: main GPU7: Radeon RX 580 Series (pcie 8), OpenCL 1.2, 8 GB VRAM, 36 CUs
2018.09.12:20:04:41.427: main GPU8: Radeon RX 580 Series (pcie 9), OpenCL 1.2, 8 GB VRAM, 36 CUs
2018.09.12:20:04:41.428: main AMD sysfs monitor initialized
2018.09.12:20:04:41.428: main Eth: the pool list contains 4 pools
2018.09.12:20:04:41.428: main Eth: primary pool: naw-eth.hiveon.net:4444
2018.09.12:20:04:41.428: main Starting GPU mining
September 12, 2018, 10:01:19 PM
3.5c fixed my issues, thank you
September 12, 2018, 05:28:31 PM
@Pheonixminer Pls fix -tt function, works so badly with many cards.(Asus Strix rx580 8gb, XFX rx570 8gb, Asus Strix Vega 64)
September 12, 2018, 05:20:28 PM
Would be nice to see progpow implementation.
September 12, 2018, 05:11:26 PM
Hello,
just tried the new -clgreen 1 but hashrate went from 32 to 22 Mhs. I run Sapphire Pulse 580 8Gb bios modded on Windows 10.
Here are the options I use:
PhoenixMiner.exe -pool ssl://eu1-etc.ethermine.org:5555 -pool2 ssl://............. -wal ......................AMD -proto 3 -pass x -coin etc -cdm 0 -stales 0 -clgreen 1 -amd -acm -astats 1 -leaveoc -mi 14 -gt 30 -gser 2 -wdog 1 -tt 70 -tmax 80 -fanmin 70 -fanmax 80 -powlim -10 -cclock 1200 -mclock 2050,2250,2210,2250,2250,2250,2050 -cvddc 930,900,900,900,900,900,930 -mvddc 960,950,960,960,950,950,960 -log 0
any idea?
just tried the new -clgreen 1 but hashrate went from 32 to 22 Mhs. I run Sapphire Pulse 580 8Gb bios modded on Windows 10.
Here are the options I use:
PhoenixMiner.exe -pool ssl://eu1-etc.ethermine.org:5555 -pool2 ssl://............. -wal ......................AMD -proto 3 -pass x -coin etc -cdm 0 -stales 0 -clgreen 1 -amd -acm -astats 1 -leaveoc -mi 14 -gt 30 -gser 2 -wdog 1 -tt 70 -tmax 80 -fanmin 70 -fanmax 80 -powlim -10 -cclock 1200 -mclock 2050,2250,2210,2250,2250,2250,2050 -cvddc 930,900,900,900,900,900,930 -mvddc 960,950,960,960,950,950,960 -log 0
any idea?
Remove -gt 30
thx got it !
BTW for the DEV: found a bug. If you let autotune, it will find the best value for each card, but I still can use +/- to change these values. If I try to change them, it will just set all the cards to the value of the first card instead of adding/subtracting to each value.
Then don’t do that. Auto tune will find your ideal values. Once it does just leave it be. Maybe even consider hard coding them back into the bat file so it doesn’t have to run each time you start.
of course I do not use it, but it's a bug. Not a big deal but the dev would like to know these kind of things!
September 12, 2018, 04:25:49 PM
Hello,
just tried the new -clgreen 1 but hashrate went from 32 to 22 Mhs. I run Sapphire Pulse 580 8Gb bios modded on Windows 10.
Here are the options I use:
PhoenixMiner.exe -pool ssl://eu1-etc.ethermine.org:5555 -pool2 ssl://............. -wal ......................AMD -proto 3 -pass x -coin etc -cdm 0 -stales 0 -clgreen 1 -amd -acm -astats 1 -leaveoc -mi 14 -gt 30 -gser 2 -wdog 1 -tt 70 -tmax 80 -fanmin 70 -fanmax 80 -powlim -10 -cclock 1200 -mclock 2050,2250,2210,2250,2250,2250,2050 -cvddc 930,900,900,900,900,900,930 -mvddc 960,950,960,960,950,950,960 -log 0
any idea?
just tried the new -clgreen 1 but hashrate went from 32 to 22 Mhs. I run Sapphire Pulse 580 8Gb bios modded on Windows 10.
Here are the options I use:
PhoenixMiner.exe -pool ssl://eu1-etc.ethermine.org:5555 -pool2 ssl://............. -wal ......................AMD -proto 3 -pass x -coin etc -cdm 0 -stales 0 -clgreen 1 -amd -acm -astats 1 -leaveoc -mi 14 -gt 30 -gser 2 -wdog 1 -tt 70 -tmax 80 -fanmin 70 -fanmax 80 -powlim -10 -cclock 1200 -mclock 2050,2250,2210,2250,2250,2250,2050 -cvddc 930,900,900,900,900,900,930 -mvddc 960,950,960,960,950,950,960 -log 0
any idea?
Remove -gt 30
thx got it !
BTW for the DEV: found a bug. If you let autotune, it will find the best value for each card, but I still can use +/- to change these values. If I try to change them, it will just set all the cards to the value of the first card instead of adding/subtracting to each value.
Then don’t do that. Auto tune will find your ideal values. Once it does just leave it be. Maybe even consider hard coding them back into the bat file so it doesn’t have to run each time you start.
September 12, 2018, 04:11:22 PM
Hello,
just tried the new -clgreen 1 but hashrate went from 32 to 22 Mhs. I run Sapphire Pulse 580 8Gb bios modded on Windows 10.
Here are the options I use:
PhoenixMiner.exe -pool ssl://eu1-etc.ethermine.org:5555 -pool2 ssl://............. -wal ......................AMD -proto 3 -pass x -coin etc -cdm 0 -stales 0 -clgreen 1 -amd -acm -astats 1 -leaveoc -mi 14 -gt 30 -gser 2 -wdog 1 -tt 70 -tmax 80 -fanmin 70 -fanmax 80 -powlim -10 -cclock 1200 -mclock 2050,2250,2210,2250,2250,2250,2050 -cvddc 930,900,900,900,900,900,930 -mvddc 960,950,960,960,950,950,960 -log 0
any idea?
just tried the new -clgreen 1 but hashrate went from 32 to 22 Mhs. I run Sapphire Pulse 580 8Gb bios modded on Windows 10.
Here are the options I use:
PhoenixMiner.exe -pool ssl://eu1-etc.ethermine.org:5555 -pool2 ssl://............. -wal ......................AMD -proto 3 -pass x -coin etc -cdm 0 -stales 0 -clgreen 1 -amd -acm -astats 1 -leaveoc -mi 14 -gt 30 -gser 2 -wdog 1 -tt 70 -tmax 80 -fanmin 70 -fanmax 80 -powlim -10 -cclock 1200 -mclock 2050,2250,2210,2250,2250,2250,2050 -cvddc 930,900,900,900,900,900,930 -mvddc 960,950,960,960,950,950,960 -log 0
any idea?
Remove -gt 30
thx got it !
BTW for the DEV: found a bug. If you let autotune, it will find the best value for each card, but I still can use +/- to change these values. If I try to change them, it will just set all the cards to the value of the first card instead of adding/subtracting to each value.
September 12, 2018, 02:52:37 PM
Now PhoenixMiner 3.5c is working without that "ERROR: Debugger found" error. Thank you!
I will create a pull request for https://github.com/rainbowminer/RainbowMiner, so that they integrate the new version as soon as possible.
Did you ever check it together with OhGodAnEthlargmentPill on GTX1080Ti? Does it crash or will it work?
borox
Jump to: