PhoenixMiner 3.5b works stable for my only 2x Sapphire RX580 Nitro+ rig but I don't see any change on my GPUs power draw when using new green kernels.
I get same hashrate (30.3MH) with same GPU only power draw in GPU-Z sensors tab (90W for every card) when using new kernels.
Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 380. (Read 784958 times)
September 10, 2018, 01:54:45 AM
September 09, 2018, 08:01:51 PM
Running Phoenixminer 3.5b now.
No issues starting with 12 gpu mix of 8 RX580, 2 GTX1070 and 1 R9 290. Using Overdriventool for AMD tweaking and NvidiaInspector for Nvidia gpus.
All in a single rig. FYI, I just copy/paste my bat file from version 3.0c.
No issues starting with 12 gpu mix of 8 RX580, 2 GTX1070 and 1 R9 290. Using Overdriventool for AMD tweaking and NvidiaInspector for Nvidia gpus.
All in a single rig. FYI, I just copy/paste my bat file from version 3.0c.
September 09, 2018, 12:51:54 PM
Good news! 
Almost every message after releasing new version is about problems (which is quite normal and alright), so it's quite nice to get a few positive reports. Don't hesitate to write us with any ideas for improvements, etc.
Did you see: https://bitcointalksearch.org/topic/m.43145022 Almost every message after releasing new version is about problems (which is quite normal and alright), so it's quite nice to get a few positive reports. Don't hesitate to write us with any ideas for improvements, etc. September 09, 2018, 12:50:26 PM
-clgreen 1 what is this parameter
September 09, 2018, 12:08:16 PM
I tried the 3.5b. No change:
Code:
Phoenix Miner 3.5b Windows/msvc - Release build
-----------------------------------------------
Available GPUs for mining:
GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU3: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU4: GeForce GTX 1070 (pcie 7), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU5: GeForce GTX 1070 (pcie 8), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU6: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
FATAL ERROR: Debugger detected
September 09, 2018, 10:58:09 AM
Please try the new 3.5b version, which may fix the problem. Here is how to download and verify it: https://bitcointalksearch.org/topic/m.45442768. If this doesn't help, please send us the log file to see what exactly goes wrong.
3.5b same result, log:Quote
1970.01.01:07:15:48.496: unkn OpenCL driver version: 18.5.1
2018.09.09:22:48:59.585: main Phoenix Miner 3.5b Windows/msvc - Release build
2018.09.09:22:48:59.585: main Cmd line:
2018.09.09:22:48:59.585: main config.txt: -pool stratum+tcp://etc.hvpps.net:3333 -wal 0x4afc488F6E42A6502A187A268da302D156B19C79.AwesomeMiner -pass 2.0 -proto 4 -coin etc -stales 1 -fret 5 -ptimeout 5 -ftimeout 180 -rate 1 -cdm 0 -amd -clKernel 1 -clNew 1 -clf 1 -eres 4 -lidag 1 -gser 0 -gpureset 0 -tstop 67 -tstart 50 -gt 12,10,8,12 -mi 14 -clgreen 1
2018.09.09:22:48:59.585: main Available GPUs for mining:
2018.09.09:22:48:59.585: main GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.09.09:22:48:59.585: main GPU2: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 4 GB VRAM, 36 CUs
2018.09.09:22:48:59.585: main GPU3: Radeon RX 580 Series (pcie 4), OpenCL 2.0, 4 GB VRAM, 36 CUs
2018.09.09:22:48:59.585: main GPU4: Radeon RX 580 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.09.09:22:48:59.641: main ADL library initialized
2018.09.09:22:48:59.585: main Phoenix Miner 3.5b Windows/msvc - Release build
2018.09.09:22:48:59.585: main Cmd line:
2018.09.09:22:48:59.585: main config.txt: -pool stratum+tcp://etc.hvpps.net:3333 -wal 0x4afc488F6E42A6502A187A268da302D156B19C79.AwesomeMiner -pass 2.0 -proto 4 -coin etc -stales 1 -fret 5 -ptimeout 5 -ftimeout 180 -rate 1 -cdm 0 -amd -clKernel 1 -clNew 1 -clf 1 -eres 4 -lidag 1 -gser 0 -gpureset 0 -tstop 67 -tstart 50 -gt 12,10,8,12 -mi 14 -clgreen 1
2018.09.09:22:48:59.585: main Available GPUs for mining:
2018.09.09:22:48:59.585: main GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.09.09:22:48:59.585: main GPU2: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 4 GB VRAM, 36 CUs
2018.09.09:22:48:59.585: main GPU3: Radeon RX 580 Series (pcie 4), OpenCL 2.0, 4 GB VRAM, 36 CUs
2018.09.09:22:48:59.585: main GPU4: Radeon RX 580 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.09.09:22:48:59.641: main ADL library initialized
September 09, 2018, 10:46:52 AM
v3.5a detects all devices but then ends with errorCode:
Phoenix Miner 3.5a Windows/msvc - Release build
-----------------------------------------------
Available GPUs for mining:
GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU3: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU4: GeForce GTX 1070 (pcie 7), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU5: GeForce GTX 1070 (pcie 8), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU6: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
FATAL ERROR: Debugger detected
don't work
old 3.0c work
please add moac coin
Do you have only one GPU? Is the miner just freezes, or crashes? Please try the new 3.5b version, which may fix the problem. Here is how to download and verify it: https://bitcointalksearch.org/topic/m.45442768old 3.0c work
Code:
1970.01.04:05:04:49.399: unkn OpenCL driver version: 17.31.0
2018.09.08:20:15:21.223: main Phoenix Miner 3.5a Windows/msvc - Release build
2018.09.08:20:15:21.223: main Cmd line: -amd -coin clo -pool stratum+tcp://moac.bylt.gq:5005 -wal mywalletxxxxxx -worker amd -pass x -log 1 -tstop 70 -cdm 0 -retrydelay 0 -cclock 965 -mclock 1875 -powlim 0 -cvddc 850 -mvddc 900 -clgreen 1
2018.09.08:20:15:21.223: main Available GPUs for mining:
2018.09.08:20:15:21.223: main GPU1: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 4 GB VRAM, 32 CUs
2018.09.08:20:15:21.265: main ADL library initialized
please add moac coin
Using 3.5a and can not get it to work. I have Gigabyte Vega56 oc gaming with regmod Burnsted editor.
Everytime I launch it connects fine, acts like it is mining but hash rate is 0 then crashes after a while. I can run stable on Fireice currently 1900 h/s. Do you have any recommendations to get stable in Phoenix or even to get any hash rate at all?
It's possible that your OC settings are not stable for ETH mining. Vega is notoriously power hungry, so we suggest to start with fairly low core clocks (around or under 1000 Mhz) and power limit -10% or even less. If the problem persists, you can try he new 3.5b version, which may fix the problem. Here is how to download and verify it: https://bitcointalksearch.org/topic/m.45442768. If nothing else helps, please send the log from the beginning to see if the DAG is constructed properly, etc.Everytime I launch it connects fine, acts like it is mining but hash rate is 0 then crashes after a while. I can run stable on Fireice currently 1900 h/s. Do you have any recommendations to get stable in Phoenix or even to get any hash rate at all?
3.5a won't start at all, 3.0c working perfectly since release
Please try the new 3.5b version, which may fix the problem. Here is how to download and verify it: https://bitcointalksearch.org/topic/m.45442768. If this doesn't help, please send us the log file to see what exactly goes wrong.anyone seen this error ? happens right when i launch, happens even after a fresh install wtf ?
Please try the new 3.5b version, which should fix the problem. Here is how to download and verify it: https://bitcointalksearch.org/topic/m.45442768. If this doesn't help, please send us the log file to see when the error occurs, which may gives us a clue what is causing it.Code:
Faulting application name: PhoenixMiner.exe, version: 0.0.0.0, time stamp: 0x5b12b632
Faulting module name: igdrclneo64.dll, version: 0.0.0.0, time stamp: 0x5a96b19b
Exception code: 0xc0000005
Fault offset: 0x0000000000030819
Faulting process id: 0x12e0
Faulting application start time: 0x01d4481ab1bcf677
Faulting application path: C:\Latest PhoenixMiner\PhoenixMiner.exe
Faulting module path: C:\Windows\System32\DriverStore\FileRepository\igdlh64.inf_amd64_250db833a1cd577e\igdrclneo64.dll
Report Id: 032ad2c0-acc2-4048-b285-f7afb3049b2e
Faulting package full name:
https://imgur.com/a/kTCssZG its normal?? Thats -clgreen 1
Yes, the optimal GT values for the green kernels are completely different from the other kernels (just as the GT values for -clkernel 1 and -clkernel 2 are usually also quite different from each other). So, you are doing the right thing letting auto-tune to find them. Also, please note that even if all GPUs are the same model, there are always differences and not every time the optimal GT values are the same.3.5 working fine with 14 GPU rig (nvidia), no difference in hashrate, same stable as 3.0
I finally gave it a try now that profitability has tanked and I was shutting my farm down.
Good miner, similar to Claymore, easy to setup and use and lots of information displayed.
Works well on my AMD Rx 570's, with maximum tweaking I am getting about 0.2 mh per care more with Phoenix and consuming 4W power less compared to claymores.
Also this miner has a lower devfee, so theres three title advantages in all - 1% extra hash rate, 4% lower power, and 0.35% lower fee.
If I ever boot up my farm again, I would use this miner going forward. Also appreciate the regular updates to it, which hasn't been the case for claymores.
Good news! Good miner, similar to Claymore, easy to setup and use and lots of information displayed.
Works well on my AMD Rx 570's, with maximum tweaking I am getting about 0.2 mh per care more with Phoenix and consuming 4W power less compared to claymores.
Also this miner has a lower devfee, so theres three title advantages in all - 1% extra hash rate, 4% lower power, and 0.35% lower fee.
If I ever boot up my farm again, I would use this miner going forward. Also appreciate the regular updates to it, which hasn't been the case for claymores.
Almost every message after releasing new version is about problems (which is quite normal and alright), so it's quite nice to get a few positive reports. Don't hesitate to write us with any ideas for improvements, etc. September 09, 2018, 10:24:12 AM
There is a new beta for Windows: PhoenixMiner 3.5b, which can be downloaded from here:
(MEGA links are no longer active)
If you want to check the integrity of the downloaded file, please use the following hashes:
There are only small fixes in 3.5b, hopefully mitigating the problems with some drivers (Fatal error: debugger detected, etc.).
Note that there isn't a new beta for Linux, so 3.5a remains the latest for Linux (it is in the same folder as above, and you can see its checksums in this post: https://bitcointalksearch.org/topic/m.45385531.
A few notes:
Finally, here are the changes since the 3.0c again:
* Support for Linux (tested on Ubuntu 16.04 LTS and Debian 9.5 stable). Note that we have tested with AMD GPU-Pro drivers (not the open source drivers) and the official Nvidia closed-source drivers. Please note that this is the first version that supports Linux, so some glitches are to be expected. Do not hesitate to write us about any problems.
* With the recent drop in prices of most cryptos, we are trying to come up with ways to increase the profitability. Since the cost of the electric power a major factor now, we worked hard to create new, power-efficient kernels for most widely used AMD cards (RX580/570/560/480/470/460). To use these kernels, you must specify the option -clgreen 1 on the command-line, or in the config.txt file. In our tests the green kernels lower the power consumption by 2-3% on the supported cards. These kernels may also slightly lower the hashrate (by 0.2-0.5%), so you have to check if they are more efficient for you depending on the electricity costs in your area.
* Small improvements in the normal AMD kernels to increase hashrate (RX4xx, RX5xx, Tonga, and Fury)
* Added advanced stats option (you have to turn this on with the command-line option -astats 1) that will try to estimate the daily earnings depending on the current price of the coin you are mining and the current difficulty. Note that this is only an estimation and it uses information from third-party web sites, which may not be accurate.
* Added support for direct mining of DubaiCoin (DBIX)
* Added -leaveoc option to prevent resetting of the HW OC settings to defaults on exit
* Many small fixes
(MEGA links are no longer active)
If you want to check the integrity of the downloaded file, please use the following hashes:
Code:
File: PhoenixMiner_3.5b_Windows.zip
===================================
SHA-1: 6e7be7b9a12fd2db2cd8c3c37f94a3f4a21397f9
SHA-256: d8978bfc0c0b11f684528a3fb8b9d89ab1d09d63097c5e23a07a19d6cc5cf195
SHA-512: 90253e600ff86a3d7b1fa33af19933a84735d04305e16090e085ca33c3a0935844156506b4f80cd1c288f6e7e9a9bbb5564662dcf84bf1d1ce7d62afb46ff8ff
There are only small fixes in 3.5b, hopefully mitigating the problems with some drivers (Fatal error: debugger detected, etc.).
Note that there isn't a new beta for Linux, so 3.5a remains the latest for Linux (it is in the same folder as above, and you can see its checksums in this post: https://bitcointalksearch.org/topic/m.45385531.
A few notes:
- The new -clgreen kernels have completely different optimal GT values, so you have to run auto-tune again to get the optimal hashrate with them
- Unfortunately, the time wasn't enough to implement HW control in Linux, so only the monitoring works there (i.e. showing fan speeds and temperatures but not controlling them). This will be implemented in the next release.
Finally, here are the changes since the 3.0c again:
* Support for Linux (tested on Ubuntu 16.04 LTS and Debian 9.5 stable). Note that we have tested with AMD GPU-Pro drivers (not the open source drivers) and the official Nvidia closed-source drivers. Please note that this is the first version that supports Linux, so some glitches are to be expected. Do not hesitate to write us about any problems.
* With the recent drop in prices of most cryptos, we are trying to come up with ways to increase the profitability. Since the cost of the electric power a major factor now, we worked hard to create new, power-efficient kernels for most widely used AMD cards (RX580/570/560/480/470/460). To use these kernels, you must specify the option -clgreen 1 on the command-line, or in the config.txt file. In our tests the green kernels lower the power consumption by 2-3% on the supported cards. These kernels may also slightly lower the hashrate (by 0.2-0.5%), so you have to check if they are more efficient for you depending on the electricity costs in your area.
* Small improvements in the normal AMD kernels to increase hashrate (RX4xx, RX5xx, Tonga, and Fury)
* Added advanced stats option (you have to turn this on with the command-line option -astats 1) that will try to estimate the daily earnings depending on the current price of the coin you are mining and the current difficulty. Note that this is only an estimation and it uses information from third-party web sites, which may not be accurate.
* Added support for direct mining of DubaiCoin (DBIX)
* Added -leaveoc option to prevent resetting of the HW OC settings to defaults on exit
* Many small fixes
September 09, 2018, 10:20:42 AM
3.5a won't start at all, 3.0c working perfectly since release
OriginalPhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001
Try this
PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -ewal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001
Didn't help, config or console parameters, still won't launch.
September 09, 2018, 10:16:19 AM
v3.5a detects all devices but then ends with errorCode:
Phoenix Miner 3.5a Windows/msvc - Release build
-----------------------------------------------
Available GPUs for mining:
GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU2: GeForce GTX 1070 (pcie 3), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU3: GeForce GTX 1070 (pcie 5), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU4: GeForce GTX 1070 (pcie 7), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU5: GeForce GTX 1070 (pcie 8), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
GPU6: GeForce GTX 1070 (pcie 9), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
FATAL ERROR: Debugger detected
don't work
old 3.0c work
please add moac coin
Do you have only one GPU? Is the miner just freezes, or crashes? Please try the new 3.5b version, which may fix the problem. Here is how to download and verify it: https://bitcointalksearch.org/topic/m.45442768old 3.0c work
Code:
1970.01.04:05:04:49.399: unkn OpenCL driver version: 17.31.0
2018.09.08:20:15:21.223: main Phoenix Miner 3.5a Windows/msvc - Release build
2018.09.08:20:15:21.223: main Cmd line: -amd -coin clo -pool stratum+tcp://moac.bylt.gq:5005 -wal mywalletxxxxxx -worker amd -pass x -log 1 -tstop 70 -cdm 0 -retrydelay 0 -cclock 965 -mclock 1875 -powlim 0 -cvddc 850 -mvddc 900 -clgreen 1
2018.09.08:20:15:21.223: main Available GPUs for mining:
2018.09.08:20:15:21.223: main GPU1: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 4 GB VRAM, 32 CUs
2018.09.08:20:15:21.265: main ADL library initialized
please add moac coin
Using 3.5a and can not get it to work. I have Gigabyte Vega56 oc gaming with regmod Burnsted editor.
Everytime I launch it connects fine, acts like it is mining but hash rate is 0 then crashes after a while. I can run stable on Fireice currently 1900 h/s. Do you have any recommendations to get stable in Phoenix or even to get any hash rate at all?
It's possible that your OC settings are not stable for ETH mining. Vega is notoriously power hungry, so we suggest to start with fairly low core clocks (around or under 1000 Mhz) and power limit -10% or even less. If the problem persists, you can try he new 3.5b version, which may fix the problem. Here is how to download and verify it: https://bitcointalksearch.org/topic/m.45442768. If nothing else helps, please send the log from the beginning to see if the DAG is constructed properly, etc.Everytime I launch it connects fine, acts like it is mining but hash rate is 0 then crashes after a while. I can run stable on Fireice currently 1900 h/s. Do you have any recommendations to get stable in Phoenix or even to get any hash rate at all?
3.5a won't start at all, 3.0c working perfectly since release
Please try the new 3.5b version, which may fix the problem. Here is how to download and verify it: https://bitcointalksearch.org/topic/m.45442768. If this doesn't help, please send us the log file to see what exactly goes wrong.anyone seen this error ? happens right when i launch, happens even after a fresh install wtf ?
Please try the new 3.5b version, which should fix the problem. Here is how to download and verify it: https://bitcointalksearch.org/topic/m.45442768. If this doesn't help, please send us the log file to see when the error occurs, which may gives us a clue what is causing it.Code:
Faulting application name: PhoenixMiner.exe, version: 0.0.0.0, time stamp: 0x5b12b632
Faulting module name: igdrclneo64.dll, version: 0.0.0.0, time stamp: 0x5a96b19b
Exception code: 0xc0000005
Fault offset: 0x0000000000030819
Faulting process id: 0x12e0
Faulting application start time: 0x01d4481ab1bcf677
Faulting application path: C:\Latest PhoenixMiner\PhoenixMiner.exe
Faulting module path: C:\Windows\System32\DriverStore\FileRepository\igdlh64.inf_amd64_250db833a1cd577e\igdrclneo64.dll
Report Id: 032ad2c0-acc2-4048-b285-f7afb3049b2e
Faulting package full name:
https://imgur.com/a/kTCssZG its normal?? Thats -clgreen 1
Yes, the optimal GT values for the green kernels are completely different from the other kernels (just as the GT values for -clkernel 1 and -clkernel 2 are usually also quite different from each other). So, you are doing the right thing letting auto-tune to find them. Also, please note that even if all GPUs are the same model, there are always differences and not every time the optimal GT values are the same.3.5 working fine with 14 GPU rig (nvidia), no difference in hashrate, same stable as 3.0
I finally gave it a try now that profitability has tanked and I was shutting my farm down.
Good miner, similar to Claymore, easy to setup and use and lots of information displayed.
Works well on my AMD Rx 570's, with maximum tweaking I am getting about 0.2 mh per care more with Phoenix and consuming 4W power less compared to claymores.
Also this miner has a lower devfee, so theres three title advantages in all - 1% extra hash rate, 4% lower power, and 0.35% lower fee.
If I ever boot up my farm again, I would use this miner going forward. Also appreciate the regular updates to it, which hasn't been the case for claymores.
Good news! Good miner, similar to Claymore, easy to setup and use and lots of information displayed.
Works well on my AMD Rx 570's, with maximum tweaking I am getting about 0.2 mh per care more with Phoenix and consuming 4W power less compared to claymores.
Also this miner has a lower devfee, so theres three title advantages in all - 1% extra hash rate, 4% lower power, and 0.35% lower fee.
If I ever boot up my farm again, I would use this miner going forward. Also appreciate the regular updates to it, which hasn't been the case for claymores.
Almost every message after releasing new version is about problems (which is quite normal and alright), so it's quite nice to get a few positive reports. Don't hesitate to write us with any ideas for improvements, etc. September 09, 2018, 09:34:59 AM
https://imgur.com/a/kTCssZG its normal?? Thats -clgreen 1
September 09, 2018, 07:17:32 AM
3.5 working fine with 14 GPU rig (nvidia), no difference in hashrate, same stable as 3.0
September 09, 2018, 04:00:10 AM
anyone seen this error ? happens right when i launch, happens even after a fresh install wtf ?
Faulting application name: PhoenixMiner.exe, version: 0.0.0.0, time stamp: 0x5b12b632
Faulting module name: igdrclneo64.dll, version: 0.0.0.0, time stamp: 0x5a96b19b
Exception code: 0xc0000005
Fault offset: 0x0000000000030819
Faulting process id: 0x12e0
Faulting application start time: 0x01d4481ab1bcf677
Faulting application path: C:\Latest PhoenixMiner\PhoenixMiner.exe
Faulting module path: C:\Windows\System32\DriverStore\FileRepository\igdlh64.inf_amd64_250db833a1cd577e\igdrclneo64.dll
Report Id: 032ad2c0-acc2-4048-b285-f7afb3049b2e
Faulting package full name:
September 09, 2018, 03:51:14 AM
I finally gave it a try now that profitability has tanked and I was shutting my farm down.
Good miner, similar to Claymore, easy to setup and use and lots of information displayed.
Works well on my AMD Rx 570's, with maximum tweaking I am getting about 0.2 mh per care more with Phoenix and consuming 4W power less compared to claymores.
Also this miner has a lower devfee, so theres three title advantages in all - 1% extra hash rate, 4% lower power, and 0.35% lower fee.
If I ever boot up my farm again, I would use this miner going forward. Also appreciate the regular updates to it, which hasn't been the case for claymores.
Good miner, similar to Claymore, easy to setup and use and lots of information displayed.
Works well on my AMD Rx 570's, with maximum tweaking I am getting about 0.2 mh per care more with Phoenix and consuming 4W power less compared to claymores.
Also this miner has a lower devfee, so theres three title advantages in all - 1% extra hash rate, 4% lower power, and 0.35% lower fee.
If I ever boot up my farm again, I would use this miner going forward. Also appreciate the regular updates to it, which hasn't been the case for claymores.
September 09, 2018, 01:19:26 AM
3.5a won't start at all, 3.0c working perfectly since release
Original
PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001
Try this
PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -ewal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001
September 08, 2018, 10:06:03 PM
3.5a won't start at all, 3.0c working perfectly since release
September 08, 2018, 06:07:03 PM
Code:
Using 3.5a and can not get it to work. I have Gigabyte Vega56 oc gaming with regmod Burnsted editor.
Everytime I launch it connects fine, acts like it is mining but hash rate is 0 then crashes after a while. I can run stable on Fireice currently 1900 h/s. Do you have any recommendations to get stable in Phoenix or even to get any hash rate at all?
PowerPlay Edit:
"PP_PhmSoftPowerPlayTable"=hex:A7,02,08,01,00,5C,00,EF,06,00,00,0E,2C,00,00,1B,\
00,48,00,00,00,80,A9,03,00,F0,49,02,00,00,00,08,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,02,01,5C,00,40,02,37,02,94,00,8F,01,B4,00,1E,01,7A,00,8C,00,\
AD,01,00,00,00,00,63,02,00,00,90,00,99,02,5E,01,34,01,88,01,68,36,02,00,71,\
02,02,02,00,00,00,00,00,00,08,00,00,00,00,00,00,00,05,00,07,00,03,00,05,00,\
00,00,00,00,00,00,01,08,84,03,84,03,84,03,84,03,84,03,84,03,84,03,84,03,01,\
01,B6,03,01,01,84,03,00,06,60,EA,00,00,00,40,19,01,00,01,DC,4A,01,00,02,00,\
77,01,00,03,90,91,01,00,05,6C,B0,01,00,07,01,08,D0,4C,01,00,00,00,80,00,00,\
00,00,00,00,1C,83,01,00,01,00,00,00,00,00,00,00,00,70,A7,01,00,02,00,00,00,\
00,00,00,00,00,88,BC,01,00,03,00,00,00,00,00,00,00,00,38,C1,01,00,04,00,00,\
00,00,00,00,00,00,88,D5,01,00,05,00,00,00,00,01,00,00,00,70,D9,01,00,06,00,\
00,00,00,01,00,00,00,9C,25,02,00,07,00,00,00,00,01,00,00,00,00,04,60,EA,00,\
00,00,40,19,01,00,00,DC,4A,01,00,00,90,5F,01,00,00,00,08,28,6E,00,00,00,2C,\
C9,00,00,01,F8,0B,01,00,02,80,38,01,00,03,90,5F,01,00,04,F4,91,01,00,05,D0,\
B0,01,00,06,C0,D4,01,00,07,00,08,6C,39,00,00,00,24,5E,00,00,01,FC,85,00,00,\
02,AC,BC,00,00,03,34,D0,00,00,04,68,6E,01,00,05,08,97,01,00,06,EC,A3,01,00,\
07,00,01,68,3C,01,00,00,01,04,3C,41,00,00,00,00,00,50,C3,00,00,00,00,00,70,\
11,01,00,01,00,00,18,73,01,00,02,00,00,01,08,00,98,85,00,00,40,B5,00,00,60,\
EA,00,00,50,C3,00,00,01,80,BB,00,00,60,EA,00,00,94,0B,01,00,50,C3,00,00,02,\
78,FF,00,00,40,19,01,00,B4,27,01,00,50,C3,00,00,03,B4,27,01,00,DC,4A,01,00,\
DC,4A,01,00,50,C3,00,00,04,80,38,01,00,90,5F,01,00,DC,4A,01,00,50,C3,00,00,\
05,DC,4A,01,00,00,77,01,00,90,5F,01,00,50,C3,00,00,06,00,77,01,00,00,77,01,\
00,90,5F,01,00,50,C3,00,00,07,00,77,01,00,90,91,01,00,00,77,01,00,50,C3,00,\
00,01,18,00,00,00,00,00,00,00,0B,E4,12,60,09,60,09,4B,00,0A,00,54,03,90,01,\
90,01,90,01,90,01,90,01,90,01,90,01,00,00,00,00,00,02,04,31,07,A5,00,A5,00,\
A5,00,2C,01,00,00,59,00,69,00,4A,00,4A,00,5F,00,73,00,73,00,64,00,40,00,90,\
92,97,60,96,00,90,55,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,02,\
02,D4,30,00,00,02,10,60,EA,00,00,02,10
Phoenixminer Log:
2018.09.08:15:46:01.675: main *** 0:01 *** 9/8 15:46 **************************************
2018.09.08:15:46:01.677: main Eth: Mining ETC on us-east.ethash-hub.miningpoolhub.com:17020 for 0:01
2018.09.08:15:46:01.677: main Available GPUs for mining:
2018.09.08:15:46:01.677: main GPU1: Radeon RX Vega (pcie 4), OpenCL 2.0, 8 GB VRAM, 56 CUs
2018.09.08:15:46:01.677: main Current -gt 15
2018.09.08:15:46:01.677: main Eth: Accepted shares 0 (0 stales), rejected shares 0 (0 stales)
2018.09.08:15:46:01.677: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2018.09.08:15:46:01.677: main Eth: Average speed (5 min): 0.000 MH/s
2018.09.08:15:46:01.677: main Eth: Effective speed: 0.00 MH/s; at pool: 0.00 MH/s
2018.09.08:15:46:01.677: main
2018.09.08:15:46:02.691: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:01
2018.09.08:15:46:04.855: eths Eth: Received: {"id":null,"method":"mining.notify","params":["5069","0xb288e56d5f2b60030f0e9c2d417b8b097e7814a98b28f2b09f29364e948d61fb","0xb3b2844d0984487116ca3abeabae8c2192a06c25e78f32a60a651cd3e329b7fa","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7",true]}
2018.09.08:15:46:04.856: eths Eth: New job #b288e56d from us-east.ethash-hub.miningpoolhub.com:17020; diff: 4300MH
2018.09.08:15:46:07.769: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:01
2018.09.08:15:46:12.833: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:01
2018.09.08:15:46:15.338: eths Eth: Received: {"id":null,"method":"mining.notify","params":["506a","0xccaeedd1fd35b27b48fe2ce2b3f0870c63b12d217fc031fbbb9c0d80e2e76745","0xb3b2844d0984487116ca3abeabae8c2192a06c25e78f32a60a651cd3e329b7fa","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7",true]}
2018.09.08:15:46:15.338: eths Eth: New job #ccaeedd1 from us-east.ethash-hub.miningpoolhub.com:17020; diff: 4300MH
2018.09.08:15:46:16.850: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0","0xef4347faeff0a7d05c856fa630602fe5bf6c4754c177a0771259c11a7989823f"]}
2018.09.08:15:46:16.942: eths Eth: Received: {"id":6,"result":true,"error":null}
2018.09.08:15:46:17.970: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:01
2018.09.08:15:46:23.021: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:01
2018.09.08:15:46:26.890: main
2018.09.08:15:46:26.890: main *** 0:01 *** 9/8 15:46 **************************************
2018.09.08:15:46:26.890: main Eth: Mining ETC on us-east.ethash-hub.miningpoolhub.com:17020 for 0:01
2018.09.08:15:46:26.890: main Eth: Accepted shares 0 (0 stales), rejected shares 0 (0 stales)
2018.09.08:15:46:26.890: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2018.09.08:15:46:26.890: main Eth: Average speed (5 min): 0.000 MH/s
2018.09.08:15:46:26.890: main Eth: Effective speed: 0.00 MH/s; at pool: 0.00 MH/s
2018.09.08:15:46:26.890: main
2018.09.08:15:46:27.762: wdog GPU1 not responding
2018.09.08:15:46:27.762: wdog Thread(s) not responding. Restarting.
2018.09.08:15:46:27.861: eths Eth: Received: {"id":null,"method":"mining.notify","params":["506b","0x587eeb39ca984e9962d5c8e46ab0e343d4edd85b0c8fe85ba59e34e726e65aa9","0xb3b2844d0984487116ca3abeabae8c2192a06c25e78f32a60a651cd3e329b7fa","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7",true]}
2018.09.08:15:46:27.861: eths Eth: New job #587eeb39 from us-east.ethash-hub.miningpoolhub.com:17020; diff: 4300MH
2018.09.08:15:46:28.118: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:01
2018.09.08:15:46:33.224: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:01
September 08, 2018, 05:01:36 PM
No wonder the Devs are not updating their apps. PM is stable but, there's no profit in it and they know miners won't be using it much longer as the price decreases even more. ETH price is now below cost of power even at $.08/Kw. I've shut all of my rigs down. I'm not ready to sell them yet in hopes the price will come back up next year.
Lol... you do not understand how it works. No matter what the price of ether is and how many people mine - dev's income (in ether) will not be affected. In dollars they will get less, but there is no way they can lose money, right? (unlike you and me as we have to pay for electricity).
Consider this: less people mine=> lower difficulty, but block reward doesn't change. Even if there is only one miner left (let's call him Vitalik
), and he is mining with phoenix, phoenix will still get his 0.09*5 Ether every 15 minutes. Or if there are 10,000 people mining, still 0.09*5 Ether every 15 minutes.Wrong again!!! I understand all too well. I've been in the computer industry long before the first IBM desktop PC hit the market in 1981. The math is quite simple: $350 cost for power per month vs. 193.00 per ETH at 1.3 ETH per month = Loss, not profit. The dev fee is 0.65%, which is 0.0065. Yes they get their cut which is perfectly viable since they are the ones writing PM. But, their profits are declining as miners like myself turn off their rigs because the overall price is now at $195 per eth.
September 08, 2018, 02:30:11 PM
The first beta of PhoenixMiner 3.5b is out: https://bitcointalksearch.org/topic/m.45385531. Improvements include Linux support (finally), and power-efficient kernels for some AMD cards.
Respectfully, this is a load of BS. First, we get 0.65%, which is 0.0065 for mathematically challenged, not 0.09 (i.e. about 14 times less). Second, the block reward is 3 eth, soon to become less. Third, not everyone mines with PhoenixMiner (we wish, but the reality is quite different). But most importantly - the value of income in ETH is meaningless if the ETH price is too small. After all we can't pay our bills with ETH, can we? So, we are in the same boat with everyone as the profits are concerned.
We firmly believe in the future of ETH (and in cryptocurrency in general), and while these are trying times, so far every time after such dip, there was even higher peak. We keep most of our savings in ETH, and other cryptos, so we definitely put our money where our mouths are.
Lol... you do not understand how it works. No matter what the price of ether is and how many people mine - dev's income (in ether) will not be affected. In dollars they will get less, but there is no way they can lose money, right? (unlike you and me as we have to pay for electricity).
Consider this: less people mine=> lower difficulty, but block reward doesn't change. Even if there is only one miner left (let's call him Vitalik), and he is mining with phoenix, phoenix will still get his 0.09*5 Ether every 15 minutes. Or if there are 10,000 people mining, still 0.09*5 Ether every 15 minutes.
Consider this: less people mine=> lower difficulty, but block reward doesn't change. Even if there is only one miner left (let's call him Vitalik
), and he is mining with phoenix, phoenix will still get his 0.09*5 Ether every 15 minutes. Or if there are 10,000 people mining, still 0.09*5 Ether every 15 minutes.Respectfully, this is a load of BS. First, we get 0.65%, which is 0.0065 for mathematically challenged, not 0.09 (i.e. about 14 times less). Second, the block reward is 3 eth, soon to become less. Third, not everyone mines with PhoenixMiner (we wish, but the reality is quite different). But most importantly - the value of income in ETH is meaningless if the ETH price is too small. After all we can't pay our bills with ETH, can we? So, we are in the same boat with everyone as the profits are concerned.
We firmly believe in the future of ETH (and in cryptocurrency in general), and while these are trying times, so far every time after such dip, there was even higher peak. We keep most of our savings in ETH, and other cryptos, so we definitely put our money where our mouths are.
Chilax mate. What is BS - it's what you say. You are right - my math was wrong (wrote in hurry, didn't pay attention). Let's correct it: 0.0065*3*0.2 (assuming 20% of miners use phoenix and the rest 80% - claymore). But besides the math the idea is totally valid. You are not in the same boat with miners at all: miners can lose money, you can't. The guy just said that he shut down his rigs because of the electricity costs; did your revenue change? nope. How are you in the same boat with him?
So I stand on my point: "No matter what the price of ether is and how many people mine - dev's income (in ether) will not be affected. "
You say it's BS...well....I'm listening...
September 08, 2018, 12:21:13 PM
don't work
old 3.0c work
1970.01.04:05:04:49.399: unkn OpenCL driver version: 17.31.0
2018.09.08:20:15:21.223: main Phoenix Miner 3.5a Windows/msvc - Release build
2018.09.08:20:15:21.223: main Cmd line: -amd -coin clo -pool stratum+tcp://moac.bylt.gq:5005 -wal mywalletxxxxxx -worker amd -pass x -log 1 -tstop 70 -cdm 0 -retrydelay 0 -cclock 965 -mclock 1875 -powlim 0 -cvddc 850 -mvddc 900 -clgreen 1
2018.09.08:20:15:21.223: main Available GPUs for mining:
2018.09.08:20:15:21.223: main GPU1: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 4 GB VRAM, 32 CUs
2018.09.08:20:15:21.265: main ADL library initialized
please add moac coin
old 3.0c work
1970.01.04:05:04:49.399: unkn OpenCL driver version: 17.31.0
2018.09.08:20:15:21.223: main Phoenix Miner 3.5a Windows/msvc - Release build
2018.09.08:20:15:21.223: main Cmd line: -amd -coin clo -pool stratum+tcp://moac.bylt.gq:5005 -wal mywalletxxxxxx -worker amd -pass x -log 1 -tstop 70 -cdm 0 -retrydelay 0 -cclock 965 -mclock 1875 -powlim 0 -cvddc 850 -mvddc 900 -clgreen 1
2018.09.08:20:15:21.223: main Available GPUs for mining:
2018.09.08:20:15:21.223: main GPU1: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 4 GB VRAM, 32 CUs
2018.09.08:20:15:21.265: main ADL library initialized
please add moac coin
Jump to: