Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 391. (Read 784958 times)
July 16, 2018, 03:14:18 PM
OP are you still out there? Haven’t heard from you in a while.
July 16, 2018, 11:23:54 AM
Just use version 2.9e. Works alot better. Now running for 580H straight in my 8 GPU AMD rig
July 15, 2018, 07:06:08 PM
I'm one of the folks with significnat problems on 3.0. I have 18 AMD rx 570/580 cards across 2 rigs.. In the last 2 weeks, I couldn't get Phoenix to load properly, it just freezes without any log details during the initialization process.
I've tried loweirng MI, Altinit, old kernels, new kernels, gser 2-7... I've switched back to Claymore for the time being.
Before 2 weeks ago, i was running phoenix for about 2 months without any issues.
I've tried loweirng MI, Altinit, old kernels, new kernels, gser 2-7... I've switched back to Claymore for the time being.
Before 2 weeks ago, i was running phoenix for about 2 months without any issues.
July 15, 2018, 06:09:14 PM
please release linux version 
!
! July 15, 2018, 02:38:32 PM
Hello Phoenix team,
Any update? I seem version 3.0C have some problem, a lot of PP rollback 2.9e
Any update? I seem version 3.0C have some problem, a lot of PP rollback 2.9e
Looks like 3.0c have a lot of problem, I can't get it working for more than two days. 2.9e works perfect for me 🙄
Running 1 month on all rigs. No problem
July 15, 2018, 02:22:17 PM
Hello Phoenix team,
Any update? I seem version 3.0C have some problem, a lot of PP rollback 2.9e
Any update? I seem version 3.0C have some problem, a lot of PP rollback 2.9e
Looks like 3.0c have a lot of problem, I can't get it working for more than two days. 2.9e works perfect for me 🙄
July 15, 2018, 12:39:05 PM
@ PhoenixMiner
I second the request to reverse engineer OhGodACompany's Ethlargment Pill.... If you follow Kristy, she's stated that the software was card locked for the 1080 & 1080ti but works with the 1060 and 1070.
From what I've put together if someone figures out how to remove the card lock it would detect the 10 series card and set mem timings appropriately (this maybe incorrect info) but regardless it would show how to inject mem timings without flashing the cards with a SPI programmer & pomona clip.
She's under a NDA agreement for the software and from my understanding, cant release it for the 1060 and 1070 until someone else reverse engineers and releases it with or without dev fee. No matter how you look at it it would give you more hashrate on your dev fee and help us compete with what ever FPGA's are out there on ETH and the E3 that's about to ship.
Wolf0 aka OhGodAPet already penetrated your miner to take a look earlier in this thread when Claymore accused you of stealing his kernels, so I think its only fair you open it up to take a look if you haven't already...
I second the request to reverse engineer OhGodACompany's Ethlargment Pill.... If you follow Kristy, she's stated that the software was card locked for the 1080 & 1080ti but works with the 1060 and 1070.
From what I've put together if someone figures out how to remove the card lock it would detect the 10 series card and set mem timings appropriately (this maybe incorrect info) but regardless it would show how to inject mem timings without flashing the cards with a SPI programmer & pomona clip.
She's under a NDA agreement for the software and from my understanding, cant release it for the 1060 and 1070 until someone else reverse engineers and releases it with or without dev fee. No matter how you look at it it would give you more hashrate on your dev fee and help us compete with what ever FPGA's are out there on ETH and the E3 that's about to ship.
Wolf0 aka OhGodAPet already penetrated your miner to take a look earlier in this thread when Claymore accused you of stealing his kernels, so I think its only fair you open it up to take a look if you haven't already...
July 15, 2018, 10:52:26 AM
Version 3.0c. Fan control seems not to be working properly.
Environment:
Clean installation Windows 10 (1709), no updates.
Drivers - latest (18.6.1)
Card: single Asus ROG Strix RX580 O8G (stock bios, only timings modified)
No any additional software than can interfere with fan control is installed (like Afterburner etc.)
-fanmin 50
-fanmax 100
-tt 55
When miner starts - fans are initially stopped. When temperature rises to 50 and above - fans start working on max speed (maybe not max but high enough). In a few seconds temperature drops below 50 and fans begin to slowdown and finally stop. In a few seconds the sequence repeats.
Tried setting -tt -50 to force constant fan speed - not working.
Your card starts fans at 50'C because it is programmed in bios. Same cards have that.Environment:
Clean installation Windows 10 (1709), no updates.
Drivers - latest (18.6.1)
Card: single Asus ROG Strix RX580 O8G (stock bios, only timings modified)
No any additional software than can interfere with fan control is installed (like Afterburner etc.)
-fanmin 50
-fanmax 100
-tt 55
When miner starts - fans are initially stopped. When temperature rises to 50 and above - fans start working on max speed (maybe not max but high enough). In a few seconds temperature drops below 50 and fans begin to slowdown and finally stop. In a few seconds the sequence repeats.
Tried setting -tt -50 to force constant fan speed - not working.
-tt 55 means target temp. 55'C
If your fans starts at 50'C and target is 55'C, so you are very close to your target temperature, that is why fans are working close to 100%.
Change -tt 65 and you should be fine.
July 15, 2018, 08:46:40 AM
OhGodAnETHlargementPill work only for DDR5x memory cards - 1080 and 1080ti
1060 and 1070 dont increase hashrate by it
1060 and 1070 dont increase hashrate by it
July 14, 2018, 06:22:46 AM
No problem here.
July 14, 2018, 03:36:29 AM
Hello Phoenix team,
Any update? I seem version 3.0C have some problem, a lot of PP rollback 2.9e
Any update? I seem version 3.0C have some problem, a lot of PP rollback 2.9e
July 13, 2018, 05:36:27 PM
Have you tried control fan speed using any other software, e.g. Asus gpu tweak II?
Command -tt -50 should keep fans at 50% but that GPU has a thing they called 0dB technology and it starts fans at 55°C and stops them when temperature drops below that value.
Maybe you should try -tt -30 to keep fans at 30%, that way GPU should be above 55°C and fans would be spinning constantly.
I don't think that's right. -tt should be target temp, right? As in, the miner will adjust the fans to keep the temp at the -tt value. The args to do what you're suggesting should be -fanmin 30. Or am I an idiot?
I just checked readme file and it says:
-tt
1-4 - only monitoring on all cards with 30-120 seconds interval, negative - fixed fan speed at n %)
That means if you set -tt 30 that target temperature should be 30°C (I am just using this temperature as an example), but if you set -tt -30 that means you set fixed fan speed at 30%.
I am using -tt -70 in Claymore miner and my fans are constantly spinning at 70%, it should do the same in PhoenixMiner.
Try -tt -30 or some other value and see what happens.
Ah ok, I see. Thanks for clarifying!
July 13, 2018, 12:39:40 PM
Have you tried control fan speed using any other software, e.g. Asus gpu tweak II?
Command -tt -50 should keep fans at 50% but that GPU has a thing they called 0dB technology and it starts fans at 55°C and stops them when temperature drops below that value.
Maybe you should try -tt -30 to keep fans at 30%, that way GPU should be above 55°C and fans would be spinning constantly.
I don't think that's right. -tt should be target temp, right? As in, the miner will adjust the fans to keep the temp at the -tt value. The args to do what you're suggesting should be -fanmin 30. Or am I an idiot?
I just checked readme file and it says:
-tt
1-4 - only monitoring on all cards with 30-120 seconds interval, negative - fixed fan speed at n %)
That means if you set -tt 30 that target temperature should be 30°C (I am just using this temperature as an example), but if you set -tt -30 that means you set fixed fan speed at 30%.
I am using -tt -70 in Claymore miner and my fans are constantly spinning at 70%, it should do the same in PhoenixMiner.
Try -tt -30 or some other value and see what happens.
July 13, 2018, 12:24:18 PM
Have you tried control fan speed using any other software, e.g. Asus gpu tweak II?
Command -tt -50 should keep fans at 50% but that GPU has a thing they called 0dB technology and it starts fans at 55°C and stops them when temperature drops below that value.
Maybe you should try -tt -30 to keep fans at 30%, that way GPU should be above 55°C and fans would be spinning constantly.
I don't think that's right. -tt should be target temp, right? As in, the miner will adjust the fans to keep the temp at the -tt value. The args to do what you're suggesting should be -fanmin 30. Or am I an idiot?
July 12, 2018, 02:00:07 PM
Version 3.0c. Fan control seems not to be working properly.
Environment:
Clean installation Windows 10 (1709), no updates.
Drivers - latest (18.6.1)
Card: single Asus ROG Strix RX580 O8G (stock bios, only timings modified)
No any additional software than can interfere with fan control is installed (like Afterburner etc.)
-fanmin 50
-fanmax 100
-tt 55
When miner starts - fans are initially stopped. When temperature rises to 50 and above - fans start working on max speed (maybe not max but high enough). In a few seconds temperature drops below 50 and fans begin to slowdown and finally stop. In a few seconds the sequence repeats.
Tried setting -tt -50 to force constant fan speed - not working.
At the same time it works on Asus Strix RX570 more or less properly. At least asjusts fan speed to keep temperature set by -tt.
I have compared bios bios fan settings for these two cards - they are identical.
It is incompatibility with this particular card or I am missing something?
Environment:
Clean installation Windows 10 (1709), no updates.
Drivers - latest (18.6.1)
Card: single Asus ROG Strix RX580 O8G (stock bios, only timings modified)
No any additional software than can interfere with fan control is installed (like Afterburner etc.)
-fanmin 50
-fanmax 100
-tt 55
When miner starts - fans are initially stopped. When temperature rises to 50 and above - fans start working on max speed (maybe not max but high enough). In a few seconds temperature drops below 50 and fans begin to slowdown and finally stop. In a few seconds the sequence repeats.
Tried setting -tt -50 to force constant fan speed - not working.
At the same time it works on Asus Strix RX570 more or less properly. At least asjusts fan speed to keep temperature set by -tt.
I have compared bios bios fan settings for these two cards - they are identical.
It is incompatibility with this particular card or I am missing something?
Have you tried control fan speed using any other software, e.g. Asus gpu tweak II?
Command -tt -50 should keep fans at 50% but that GPU has a thing they called 0dB technology and it starts fans at 55°C and stops them when temperature drops below that value.
Maybe you should try -tt -30 to keep fans at 30%, that way GPU should be above 55°C and fans would be spinning constantly.
July 12, 2018, 01:24:44 PM
I'm having a problem with the latest version.
6 x RX580 cards, all is well for a few hours, then my machine seems to freeze.
I need to do hardreset to get it to work again, I'm not sure what the problem is.
On my other 2x Nvidea 1070ti machine there no issues and runs for days.
I do not think its overclock but not sure.
Whats the best way to see what the problem is?
6 x RX580 cards, all is well for a few hours, then my machine seems to freeze.
I need to do hardreset to get it to work again, I'm not sure what the problem is.
On my other 2x Nvidea 1070ti machine there no issues and runs for days.
I do not think its overclock but not sure.
Whats the best way to see what the problem is?
check sleep and wake up functions... it seems something like that.
I found in windows logs, issue is to do with amddiag or sumfin. quit unexpectedly.
I was using latest amd drivers so now gone downgrade..
Whats most best drivers?
I've been mining very stably for 2 months on 18.3.4, after having nothing but trouble on blockchain beta drivers.
July 11, 2018, 03:52:45 PM
I'm having a problem with the latest version.
6 x RX580 cards, all is well for a few hours, then my machine seems to freeze.
I need to do hardreset to get it to work again, I'm not sure what the problem is.
On my other 2x Nvidea 1070ti machine there no issues and runs for days.
I do not think its overclock but not sure.
Whats the best way to see what the problem is?
6 x RX580 cards, all is well for a few hours, then my machine seems to freeze.
I need to do hardreset to get it to work again, I'm not sure what the problem is.
On my other 2x Nvidea 1070ti machine there no issues and runs for days.
I do not think its overclock but not sure.
Whats the best way to see what the problem is?
check sleep and wake up functions... it seems something like that.
I found in windows logs, issue is to do with amddiag or sumfin. quit unexpectedly.
I was using latest amd drivers so now gone downgrade..
Whats most best drivers?
July 11, 2018, 05:17:45 AM
Cannot say more:-)
This miner fucks out on cuda
Hey dude.
From your posts I am convinced you don't have the brain to handle something like a miner.
You come across as a moron, and I believe it.
You should not mine, try ping-pong or something that doesn't require intelligence.
I seriously doubt you know which end of a video card to plug into a computer.
Hope these words weren't too big for you, I tried to keep it simple.
Have someone read this to you.
July 11, 2018, 02:06:21 AM
Version 3.0c. Fan control seems not to be working properly.
Environment:
Clean installation Windows 10 (1709), no updates.
Drivers - latest (18.6.1)
Card: single Asus ROG Strix RX580 O8G (stock bios, only timings modified)
No any additional software than can interfere with fan control is installed (like Afterburner etc.)
-fanmin 50
-fanmax 100
-tt 55
When miner starts - fans are initially stopped. When temperature rises to 50 and above - fans start working on max speed (maybe not max but high enough). In a few seconds temperature drops below 50 and fans begin to slowdown and finally stop. In a few seconds the sequence repeats.
Tried setting -tt -50 to force constant fan speed - not working.
At the same time it works on Asus Strix RX570 more or less properly. At least asjusts fan speed to keep temperature set by -tt.
I have compared bios bios fan settings for these two cards - they are identical.
It is incompatibility with this particular card or I am missing something?
Environment:
Clean installation Windows 10 (1709), no updates.
Drivers - latest (18.6.1)
Card: single Asus ROG Strix RX580 O8G (stock bios, only timings modified)
No any additional software than can interfere with fan control is installed (like Afterburner etc.)
-fanmin 50
-fanmax 100
-tt 55
When miner starts - fans are initially stopped. When temperature rises to 50 and above - fans start working on max speed (maybe not max but high enough). In a few seconds temperature drops below 50 and fans begin to slowdown and finally stop. In a few seconds the sequence repeats.
Tried setting -tt -50 to force constant fan speed - not working.
At the same time it works on Asus Strix RX570 more or less properly. At least asjusts fan speed to keep temperature set by -tt.
I have compared bios bios fan settings for these two cards - they are identical.
It is incompatibility with this particular card or I am missing something?
July 10, 2018, 10:34:17 PM
This miner fucks out on cuda
Hey dude.
From your posts I am convinced you don't have the brain to handle something like a miner.
You come across as a moron, and I believe it.
You should not mine, try ping-pong or something that doesn't require intelligence.
I seriously doubt you know which end of a video card to plug into a computer.
Hope these words weren't too big for you, I tried to keep it simple.
Have someone read this to you.
Jump to: