PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 399.

Mathero11

jr. member

Activity: 36

Merit: 12

Quote from: calebkan on June 10, 2018, 09:54:50 AM

Quote from: Mathero11 on June 10, 2018, 09:11:15 AM

Quote from: calebkan on June 09, 2018, 04:56:33 PM

so noone doing restart their rigs..and phoenix team didnt answer to me Sad

i want to restart my rig when rig freezer..how can i do this?what i must write my my file?

when your whole rig freezes (unable to do anything in windows) you need a external piece of hardware to do it.
something like this cost $5 from aliexpress

ty for answer..but not whole rig..i want to restart my rig when gpu freeze or miner..claymore using -r 1...phoenix ? i am using -rmode 2 but didnt work Sad

-r 1 does work in phoenix too, make sure you have a reboot.bat in the same folder with same parameters as start_miner.
but restarting the rig (computer u mean?) im not sure its possible with phoenix.
i've made a program myself to handle it.

Quote from: polofitted007 on June 10, 2018, 09:55:54 AM

Is there a way to name the rig besides putting it behind the wallet address? My pool doesn't like that format...

-eworker rig1

polofitted007

newbie

Activity: 27

Merit: 0

Is there a way to name the rig besides putting it behind the wallet address? My pool doesn't like that format...

calebkan

newbie

Activity: 19

Merit: 0

Quote from: Mathero11 on June 10, 2018, 09:11:15 AM

Quote from: calebkan on June 09, 2018, 04:56:33 PM

so noone doing restart their rigs..and phoenix team didnt answer to me Sad

i want to restart my rig when rig freezer..how can i do this?what i must write my my file?

when your whole rig freezes (unable to do anything in windows) you need a external piece of hardware to do it.
something like this cost $5 from aliexpress
https://ae01.alicdn.com/kf/HTB11bIthTTI8KJjSsphq6AFppXa9/Double-Relay-Plus-Version-USB-Dongle-WatchDog-for-Mining-Miner-Rig-Unattended-Operation-Crash-Auto-Recover.jpg_640x640.jpg

ty for answer..but not whole rig..i want to restart my rig when gpu freeze or miner..claymore using -r 1...phoenix ? i am using -rmode 2 but didnt work Sad

Mathero11

jr. member

Activity: 36

Merit: 12

Quote from: calebkan on June 09, 2018, 04:56:33 PM

so noone doing restart their rigs..and phoenix team didnt answer to me Sad

i want to restart my rig when rig freezer..how can i do this?what i must write my my file?

when your whole rig freezes (unable to do anything in windows) you need a external piece of hardware to do it.
something like this cost $5 from aliexpress

duyvu1311

newbie

Activity: 13

Merit: 0

- Your -gser param is so magic! It makes my GPUs hang at start-up. Error msg: GPUx not responding!
- if not specify -gt param, my rigs often crash when it is auto-tuning.

calebkan

newbie

Activity: 19

Merit: 0

so noone doing restart their rigs..and phoenix team didnt answer to me Sad

i want to restart my rig when rig freezer..how can i do this?what i must write my my file?

Exit_left

newbie

Activity: 7

Merit: 0

Quote from: ?? on ??

How to disable that anoyying reset clocks and memory when miner is quitting ?
The program always keeps crashing and my rig freezes.

I don't believe you can, nor would you probably want to. What kind of cards and what driver version are you running?

ethashminer

newbie

Activity: 17

Merit: 0

I updated to version 3.0c yesterday and I like the new auto-tune function! Seems my hashrate increased a little bit Wink

KriptoFull

newbie

Activity: 394

Merit: 0

Tell me,is there any way to change the font color that says Maximum difficulty of Fund share: 1151.8 GH (!) I would like to see this text highlighted from the General background!

Heardalis

sr. member

Activity: 453

Merit: 264

When do u wanna support Nvidia OC setting like Claymore ?

Iamtutut

full member

Activity: 1120

Merit: 131

Quote from: sidaliroy on June 08, 2018, 06:43:35 AM

Quote from: ScalperBTC on June 08, 2018, 05:57:25 AM

Hi PhoenixMiner

How long to wait for the version for dual mining?

+1

What do you want to dual mine ? Secondary coins are all (unless mistaken) ASIC minable, therefore not profitable anymore.

lncm

member

Activity: 388

Merit: 13

I noticed that when exiting, the cards clocks reset to default. I don't want that, is there any way to prevent it?

Also, 3.0 seems a bit slower that 2.9

With all setting equal (launching from bat file) 2.9 gives around 600h/s more with 3 ellesmere cards.

xeminer

member

Activity: 97

Merit: 10

Quote from: janding on May 30, 2018, 10:02:53 AM

Quote from: xeminer on May 30, 2018, 09:17:12 AM

Quote from: human75 on May 27, 2018, 04:53:41 PM

Quote from: lesjokolat on May 27, 2018, 02:48:16 PM

Quote from: human75 on May 27, 2018, 11:36:58 AM

Quote from: Lunga Chung on May 27, 2018, 08:22:41 AM

Quote from: human75 on May 27, 2018, 08:11:47 AM

Hi.
i am. using latest phoinex miner.
i have no stale and no incorrect shares but i have around 15 rejected shares in 36hours.
how do reduce rejected shares to minimum? Many thx in advance for your advices...

lower OC

Thanks mate. will. do

Hey guys just an FYI not sure what pool you guys are using but i recently found a pool with no fees. Works great with PM and i can say my avg eth pay has increased by20% they are smaller and find less frequent but been better for me. ethertrench.com

yes.
small pool pays more at initial and when starts cant find block then they wont pay you... i lost almost 2 week at xminer.net.electricy is expensive so i couldn't wait very long. so bigger pool pays everyday and regularly. i would prefer regular payments.

My pool is pplns. if there are no blocks. Where do I get eth from? to pay for you. When encountering difficult blocks. all ran away. when the blocks come back. All back to mining. Do not says bad behind someone else's back.

I agree with other poster, those pools suck the big one. I also was a D.A. and tried one for a while. Never again.

What does your meaning mean? I do not really understand . Can you say more about this ?

vuser133

newbie

Activity: 1

Merit: 0

Greetings to all

Problem. At startup, the message "Debugger Detected" is displayed. The key -amd does not help (RX570). What needs to be corrected? Windows 10 64bit.

janding

jr. member

Activity: 170

Merit: 6

Quote from: sidaliroy on June 08, 2018, 06:43:35 AM

Quote from: ScalperBTC on June 08, 2018, 05:57:25 AM

Hi PhoenixMiner

How long to wait for the version for dual mining?

+1

-1

guz74

newbie

Activity: 3

Merit: 0

Quote from: skinnyfalcon on June 08, 2018, 04:34:11 PM

Quote from: guz74 on June 06, 2018, 12:02:21 PM

Hi to all, I have a little problem with phenixminer, I try 3.0a , b and c

Actually I use claymore with mi rig ( 5x rx580 8gb) and the hashrate for any card is about 31.2 to 32 mh/s with a consumption about 87w for card with driver amd for blockchain; card are not flashed, original bios

Sorry but there is absolutely no way you are getting 31-32 MH/s at 87W with factory bios on a 580. as a matter of fact you couldn't get 25 without flash.

no, is absolutely possible, instead of flash bios I add this parameter in phoenix comand line: -cclock 1200 -mclock 2250 -cvddc 850 -mvddc 950. Seeing is believing

In my rig, only 1 of 6 card is flash with custom bios (my first card Grin

) , and I do not know why, this card consumes 105w

BeCreativ3

newbie

Activity: 1

Merit: 0

First, thanks for creating such a great miner.
I don't get it how to make it mine ETC (ETH mining works perfectly). It submitted only a couple of shares to the pool. The rest is just not being submitted. I tried different types of deviding wal/workername/password, trough dot, slash etc. That doesn't seem to be the issue, since some shares were sent.
Can someone help please?
This is how my bat files looks. Another small question, how do I turn off the mining for cards 10+? Most of my rigs have less than that, but I have one rig with 13 gpu.

REM
REM Example bat file for starting PhoenixMiner.exe to mine ETH
REM

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

REM IMPORTANT: Replace the ETH address with your own ETH wallet address in the -wal option (Rig001 is the name of the rig)
PhoenixMiner.exe -pool etc-eu1.nanopool.org:19999 -wal 0xc51c9c3234db3ed222b389a5ee5d7a2423794ec9/viennatheminersetc/[email protected] -coin etc -amd

pause

skinnyfalcon

newbie

Activity: 49

Merit: 0

Quote from: guz74 on June 06, 2018, 12:02:21 PM

Hi to all, I have a little problem with phenixminer, I try 3.0a , b and c

Actually I use claymore with mi rig ( 5x rx580 8gb) and the hashrate for any card is about 31.2 to 32 mh/s with a consumption about 87w for card with driver amd for blockchain; card are not flashed, original bios

Sorry but there is absolutely no way you are getting 31-32 MH/s at 87W with factory bios on a 580. as a matter of fact you couldn't get 25 without flash.

haliy-2017

newbie

Activity: 74

Merit: 0

Error fan at 3.0s, how to arrange (1060 card 6g, driver 388.13)

lesjokolat

jr. member

Activity: 117

Merit: 3

Quote from: lncm on June 08, 2018, 02:03:21 PM

After autotuning, should I just put the found values in the bat file, or could it change from run to run?

I was using -gt 15 for 3 cards (480, 570 and 580) and now autotune found -gt 13,18,16.

I would put it in BAT. I notice it can change from run to run but usuually its insignificant. Once done use teh numbers i would say.

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 399. (Read 784871 times)