[PicoStocks] 100TH/s bitcoin mine [100th] - page 55.

TheSwede75

full member

Activity: 224

Merit: 100

Quote from: MPOE-PR on August 14, 2013, 07:50:49 AM

Quote from: AM4Bitcoin on August 13, 2013, 01:48:38 PM

When i read your post i think this will cause a delay for some days maybe a week. When i read the statement on picostocks i read a delay for a full month?
Which is the case?

The cause is that he's a lying piece of shit.

Quote from: furuknap on August 13, 2013, 04:42:44 PM

Dave,

As much as this is bad news, I appreciate the notification to the market.

Appreciate the part where he ignores all of you for a while but answers within hours of my post.

I like the part where you run a mock-exchange and bash all other projects because you have sand in your vagina.

"THE BTC stock exchange" you have got to be smoking crack.

MPOE-PR

hero member

Activity: 756

Merit: 522

Quote from: AM4Bitcoin on August 13, 2013, 01:48:38 PM

When i read your post i think this will cause a delay for some days maybe a week. When i read the statement on picostocks i read a delay for a full month?
Which is the case?

The cause is that he's a lying piece of shit.

Quote from: furuknap on August 13, 2013, 04:42:44 PM

Dave,

As much as this is bad news, I appreciate the notification to the market.

Appreciate the part where he ignores all of you for a while but answers within hours of my post.

Dexter770221

legendary

Activity: 1029

Merit: 1000

Quote from: redbeans2012 on August 14, 2013, 01:34:41 AM

Is there any place I can find a summary of whats going on with this Security? Are they hashing yet, or is it very soon? Can someone give me a 1 or 2 sentence summary. Why are the charts so funny on Picostocks? lol

EDIT: found it thanks.

Yes, it hashing. With 400GH/s of prototype setup. It should start hashing this week but as you can read few post earlier manufacturing error causes bords to be usseless. Now next month needs to pass to start hashing at 100TH and another month for 200TH total. That extra 100TH is to compensate losses caused by a delay.

intron

sr. member

Activity: 427

Merit: 251

- electronics design|embedded software|verilog -

Quote from: goxed on August 14, 2013, 12:48:36 AM

Actually may make sense. I think board v1.0 was 2 layer board and possibly Les used the same PCB manufacturer and they still assumed 2 layer board.

If you take a look carefully on top right corner of v1.0 board, it shows 1 and 2 layers.

No it's not. It was always a 4-layer board.
The layer counters for layer 3 and 4 are
not visible when looking from layer top.

intron

redbeans2012

hero member

Activity: 887

Merit: 1000

Is there any place I can find a summary of whats going on with this Security? Are they hashing yet, or is it very soon? Can someone give me a 1 or 2 sentence summary. Why are the charts so funny on Picostocks? lol

EDIT: found it thanks.

snowdropfore

hero member

Activity: 843

Merit: 1001

i think the stock name should change 100TH to 200TH， it sounds more agressive。anyway, happy to hear that,i will still hold tigth my
shares.

goxed

legendary

Activity: 1946

Merit: 1006

Bitcoin / Crypto mining Hardware.

Quote from: helloge on August 13, 2013, 08:54:10 PM

what an international joke about the PCB failure with dropping 2 of 4 layers!! Cry

even the small firm will not make such stupid mistake.
how can I trust in you again and again,delay and delay,error and error!

It's happened for sure

And am glad for the upfront response by 100TH, now 200TH Wink

team. keep up the good work guys. Stuff happens.

goxed

legendary

Activity: 1946

Merit: 1006

Bitcoin / Crypto mining Hardware.

Actually may make sense. I think board v1.0 was 2 layer board and possibly Les used the same PCB manufacturer and they still assumed 2 layer board.

If you take a look carefully on top right corner of v1.0 board, it shows 1 and 2 layers.

Mobius

hero member

Activity: 988

Merit: 1000

Quote from: helloge on August 13, 2013, 08:54:10 PM

what an international joke about the PCB failure with dropping 2 of 4 layers!! Cry

even the small firm will not make such stupid mistake.
how can I trust in you again and again,delay and delay,error and error!

How can we trust your opinions?
When you build up some credibility and time under your belt, come back.

helloge

legendary

Activity: 1057

Merit: 1000

The Experience Layer of the Decentralized Internet

what an international joke about the PCB failure with dropping 2 of 4 layers!! Cry

even the small firm will not make such stupid mistake.
how can I trust in you again and again,delay and delay,error and error!

bitbytes

newbie

Activity: 23

Merit: 0

Yes. Network hash has doubled from 200TH to 400TH in the last 5 weeks so it could turn out to be just a breakeven. Given the intended hash rates for the various IPOs (even the stub Garden) these delays are major concerns.

To do the numbers we need a date for the full 200TH to be live. Can you provide an estimate?

Quote from: TheSwede75 on August 13, 2013, 08:10:22 PM

Quote from: ronaldlee0917 on August 13, 2013, 01:49:51 PM

100TH -> 200TH, share price doubled?
Just kidding, do your own maths! Grin

200TH is of course in itself a huge upgrade, but with the cumulative rollout and loss of "early mining" I think we need to do some math before yelling 'YES'..

TheSwede75

full member

Activity: 224

Merit: 100

Quote from: ronaldlee0917 on August 13, 2013, 01:49:51 PM

100TH -> 200TH, share price doubled?
Just kidding, do your own maths! Grin

200TH is of course in itself a huge upgrade, but with the cumulative rollout and loss of "early mining" I think we need to do some math before yelling 'YES'..

TheSwede75

full member

Activity: 224

Merit: 100

While I guess this is to be considered "bad news" I am convinced that Tytus and Buzzdave have everyone's best interest in mind, not only from a "good Samaritan" point of view but as share holders themselves.

At a glance I would almost claim that icon a longer horizon 200TH over 1-8 weeks is actually a worthwhile upgrade from 100TH.

bitbytes

newbie

Activity: 23

Merit: 0

Just to understand this, you are putting retail deliveries before 100th which will cause a month of additional delay, but doubling ultimate capacity to 200th. Exactly how much hashing power will be delivered to retail before us and can you promise that additional retail orders won't further subordinate our delivery?

Quote from: buzzdave on August 13, 2013, 01:36:43 PM

Guys - Les received the boards today and ... they have a problem. The fab dropped 2 of our layers, producing a 2-layer PCB (no internal interconnects). We identified the problem immediately, got it fixed, and the fab is now expediting new PCBs on a 5-day turn. We are seeking to expedite each additional step this is going to take, but we *will* lose 3 - 5 days here (and 10's of thousands of $$$)

Steps we are taking:
-2-day turn verification rig in production now
-send a team member to China to in-person test this rig
-expedite all stages of PCB production, assembly & delivery

Since we will be right up against our retail delivery timeframe, we are going to have to use the boards for filling retail product. Due to this, Tytus has announced an increased hashrate supply to our investors of 200TH total, to be deployed in the next two months cumulatively (not all at once at the end).

We are as upset at the delay/fakap as you are I'm sure. This is one of the side affects of pushing such a fast track project, but we are making it right. Believe me we want this stuff hashing as much as anyone and we are pulling out all the stops to get it done.

The pico status report can be seen here: https://picostocks.com/docs/index/19

furuknap

sr. member

Activity: 294

Merit: 250

http://coin.furuknap.net/

Quote from: buzzdave on August 13, 2013, 01:36:43 PM

Guys - Les received the boards today and ... they have a problem. The fab dropped 2 of our layers, producing a 2-layer PCB (no internal interconnects). We identified the problem immediately, got it fixed, and the fab is now expediting new PCBs on a 5-day turn. We are seeking to expedite each additional step this is going to take, but we *will* lose 3 - 5 days here (and 10's of thousands of $$$)

Steps we are taking:
-2-day turn verification rig in production now
-send a team member to China to in-person test this rig
-expedite all stages of PCB production, assembly & delivery

Since we will be right up against our retail delivery timeframe, we are going to have to use the boards for filling retail product. Due to this, Tytus has announced an increased hashrate supply to our investors of 200TH total, to be deployed in the next two months cumulatively (not all at once at the end).

We are as upset at the delay/fakap as you are I'm sure. This is one of the side affects of pushing such a fast track project, but we are making it right. Believe me we want this stuff hashing as much as anyone and we are pulling out all the stops to get it done.

The pico status report can be seen here: https://picostocks.com/docs/index/19

Dave,

As much as this is bad news, I appreciate the notification to the market. You are much more on the ball than tytus was, and I don't say that to berate him but to commend you.

Can we expect tytus to dump shares to the market now that there's bad news, like has happened the previous times? As always, I would appreciate the market being allowed to decide whether the bad news is compensated by the increased hashrate, if you don't mind.

.b

kaerf

hero member

Activity: 631

Merit: 500

Dave, will you be adding power to the datacenter to deal with the additional 100TH?

With the addition of another 100TH, I'm compelled to bring back the subject of potentially converting this security into an ASICMINER-like model where a percentage of dividends are withheld to reinvest in additional mining hardware. Converting to this model would result in a significant rise in share price (ASICMINER-like) and selling a portion of those shares would allow bitfury to quickly jump to a smaller process node to compete with the influx of new 28nm chips.

Obviously, the short-term goal is to get the mine deployed and I don't want to distract Tytus (and team) from that activity. I don't know if Tytus' really big investors are willing to do this or if Tytus himself has a controlling interest, but thought I'd bring this for discussion again.

kaerf

hero member

Activity: 631

Merit: 500

Quote from: buzzdave on August 13, 2013, 01:36:43 PM

Guys - Les received the boards today and ... they have a problem. The fab dropped 2 of our layers, producing a 2-layer PCB (no internal interconnects). We identified the problem immediately, got it fixed, and the fab is now expediting new PCBs on a 5-day turn. We are seeking to expedite each additional step this is going to take, but we *will* lose 3 - 5 days here (and 10's of thousands of $$$)

Steps we are taking:
-2-day turn verification rig in production now
-send a team member to China to in-person test this rig
-expedite all stages of PCB production, assembly & delivery

Since we will be right up against our retail delivery timeframe, we are going to have to use the boards for filling retail product. Due to this, Tytus has announced an increased hashrate supply to our investors of 200TH total, to be deployed in the next two months cumulatively (not all at once at the end).

We are as upset at the delay/fakap as you are I'm sure. This is one of the side affects of pushing such a fast track project, but we are making it right. Believe me we want this stuff hashing as much as anyone and we are pulling out all the stops to get it done.

The pico status report can be seen here: https://picostocks.com/docs/index/19

Although the delay is disappointing, I'm very happy to see how this team responds to adversity. Even though the delay is the fault of the PCB manufacturer, Tytus has decided to double the hash rate of the mine. This is not something that he was required to do, but he did it to assuage fears and reinforce the team's reputation. Rather than treating investors with contempt and letting us "just deal" with delays, he has made a proactive decision to compensate investors. Although he may be reducing short-term gains with this move, I'm certain the goodwill he's showing towards investors will only strengthen his brand/reputation and will have positive long term repercussions.

ronaldlee0917

full member

Activity: 238

Merit: 100

100TH -> 200TH, share price doubled?
Just kidding, do your own maths! Grin

AM4Bitcoin

full member

Activity: 189

Merit: 100

When i read your post i think this will cause a delay for some days maybe a week. When i read the statement on picostocks i read a delay for a full month?
Which is the case?

buzzdave

vip

Activity: 472

Merit: 250

Guys - Les received the boards today and ... they have a problem. The fab dropped 2 of our layers, producing a 2-layer PCB (no internal interconnects). We identified the problem immediately, got it fixed, and the fab is now expediting new PCBs on a 5-day turn. We are seeking to expedite each additional step this is going to take, but we *will* lose 3 - 5 days here (and 10's of thousands of $$$)

Steps we are taking:
-2-day turn verification rig in production now
-send a team member to China to in-person test this rig
-expedite all stages of PCB production, assembly & delivery

Since we will be right up against our retail delivery timeframe, we are going to have to use the boards for filling retail product. Due to this, Tytus has announced an increased hashrate supply to our investors of 200TH total, to be deployed in the next two months cumulatively (not all at once at the end).

We are as upset at the delay/fakap as you are I'm sure. This is one of the side affects of pushing such a fast track project, but we are making it right. Believe me we want this stuff hashing as much as anyone and we are pulling out all the stops to get it done.

The pico status report can be seen here: https://picostocks.com/docs/index/19

Topic: [PicoStocks] 100TH/s bitcoin mine [100th] - page 55. (Read 470203 times)