[PicoStocks] 100TH/s bitcoin mine [100th] - page 57.

astutiumRob

full member

Activity: 201

Merit: 100

Quote from: RHA on August 11, 2013, 12:11:00 AM

Quote from: buzzdave on August 03, 2013, 05:16:24 PM

I see 368G at the pool at the moment. Software is reporting 380G noncerate, 420G overall processor hashrate.

This gives current frequency of over 5 BTC per day.

Quote from: buzzdave on August 07, 2013, 02:23:06 PM

1.6TH are on their way to Tytus FedEx immediately - so I would expect conservatively 5 days.

Adding that should give about a total of over 25 BTC daily. To be seen 100 confirmations later...

Your numbers are way off.

With ~400TH (currently) on the network (more being added daily) - 2TH/s would be 0.5% which is ~18 coins/day

RHA

sr. member

Activity: 392

Merit: 250

Quote from: buzzdave on August 03, 2013, 05:16:24 PM

I see 368G at the pool at the moment. Software is reporting 380G noncerate, 420G overall processor hashrate.

This gives current frequency of over 5 BTC per day.

Quote from: buzzdave on August 07, 2013, 02:23:06 PM

1.6TH are on their way to Tytus FedEx immediately - so I would expect conservatively 5 days.

Adding that should give about a total of over 25 BTC daily. To be seen 100 confirmations later...

kaerf

hero member

Activity: 631

Merit: 500

A couple of fast div payments...more hashing power coming on line?...or possibly good luck.

dben428

member

Activity: 106

Merit: 10

Well, another div went through. Can't wait until this rate picks up... which will hopefully be soon.

TheSwede75

full member

Activity: 224

Merit: 100

Quote from: kaerf on August 08, 2013, 12:02:33 PM

Looks like dividends have stalled. Perhaps Tytus is tweaking the setup?

Fingers crossed for update on 'major' hashing power coming online shortly.

kaerf

hero member

Activity: 631

Merit: 500

Looks like dividends have stalled. Perhaps Tytus is tweaking the setup?

TheSwede75

full member

Activity: 224

Merit: 100

Quote from: bulltrap on August 07, 2013, 04:42:50 PM

Quote from: Dexter770221 on August 07, 2013, 04:22:05 PM

Finally some good news. I think that extra hashing power would be nice to recompensate 1,5 month of delay. Just my 2Bc.

This would be pretty cool.

I would also love it of course. Then there is the possibility of over-clocking that I am sure we will visit after it is all up and running.

bulltrap

member

Activity: 76

Merit: 10

Quote from: Dexter770221 on August 07, 2013, 04:22:05 PM

Finally some good news. I think that extra hashing power would be nice to recompensate 1,5 month of delay. Just my 2Bc.

This would be pretty cool.

Dexter770221

legendary

Activity: 1029

Merit: 1000

Finally some good news. I think that extra hashing power would be nice to recompensate 1,5 month of delay. Just my 2Bc.

AM4Bitcoin

full member

Activity: 189

Merit: 100

I think some are for the august orders.

TheSwede75

full member

Activity: 224

Merit: 100

Quote from: buzzdave on August 07, 2013, 02:23:06 PM

Quote from: TheSwede75 on August 07, 2013, 02:03:43 PM

Quote from: buzzdave on August 07, 2013, 12:53:55 PM

Here's the latest:

Quote

Hey guys, the first boards are shipping from the factory tomorrow. These are for 100TH rigs, but the August rigs are right on the heels of these boards (I don't know how long it takes them to make the 100TH boards). The August delivery rigs were ordered in the same batch - this is different from what I've posted previously - I had forgotten that we added to the order over the top of what was needed for 100TH.

Tytus has the software working pretty well at this point - its only consuming 25% - 30% of an rPi's processor resources, which I think is pretty amazing!

A lot of work still needs to be done around things like producing some instructions and safety recommendations. These things really are kits from that standpoint. As soon as I can post pics of how to properly set up your rigs, I'll post it on my website. I want to make sure you can get your rigs up & running without damaging them, yourself or your personal property.

Hey, I made a quick video showing screen output from a rig - thought I'd share that.

http://youtu.be/naW5uGHLbZE

Sounds good. I think we would all love a clear estimate on when we can see a significant increase in online hash-rate.

1.6TH are on their way to Tytus FedEx immediately - so I would expect conservatively 5 days. Then, daily batches will be FedEx'd to me. I would like to set the expectation that the mine won't come together perfectly in just a few days' time. These are 300 first-run rigs and I expect we will find issues with something along the way. I'll do everything I can to fire up any boards that come in however. I'm shareholder too and I want some hashes!

Thank you very much for the information! 300 first-run rigs sounds like total hashing power could/should be closer to 120 TH (300 x 400GH+) then 100TH when all is said and done?

buzzdave

vip

Activity: 472

Merit: 250

Quote from: TheSwede75 on August 07, 2013, 02:03:43 PM

Quote from: buzzdave on August 07, 2013, 12:53:55 PM

Here's the latest:

Quote

Hey guys, the first boards are shipping from the factory tomorrow. These are for 100TH rigs, but the August rigs are right on the heels of these boards (I don't know how long it takes them to make the 100TH boards). The August delivery rigs were ordered in the same batch - this is different from what I've posted previously - I had forgotten that we added to the order over the top of what was needed for 100TH.

Tytus has the software working pretty well at this point - its only consuming 25% - 30% of an rPi's processor resources, which I think is pretty amazing!

A lot of work still needs to be done around things like producing some instructions and safety recommendations. These things really are kits from that standpoint. As soon as I can post pics of how to properly set up your rigs, I'll post it on my website. I want to make sure you can get your rigs up & running without damaging them, yourself or your personal property.

Hey, I made a quick video showing screen output from a rig - thought I'd share that.

http://youtu.be/naW5uGHLbZE

Sounds good. I think we would all love a clear estimate on when we can see a significant increase in online hash-rate.

1.6TH are on their way to Tytus FedEx immediately - so I would expect conservatively 5 days. Then, daily batches will be FedEx'd to me. I would like to set the expectation that the mine won't come together perfectly in just a few days' time. These are 300 first-run rigs and I expect we will find issues with something along the way. I'll do everything I can to fire up any boards that come in however. I'm shareholder too and I want some hashes!

TheSwede75

full member

Activity: 224

Merit: 100

Quote from: buzzdave on August 07, 2013, 12:53:55 PM

Here's the latest:

Quote

Hey guys, the first boards are shipping from the factory tomorrow. These are for 100TH rigs, but the August rigs are right on the heels of these boards (I don't know how long it takes them to make the 100TH boards). The August delivery rigs were ordered in the same batch - this is different from what I've posted previously - I had forgotten that we added to the order over the top of what was needed for 100TH.

Tytus has the software working pretty well at this point - its only consuming 25% - 30% of an rPi's processor resources, which I think is pretty amazing!

A lot of work still needs to be done around things like producing some instructions and safety recommendations. These things really are kits from that standpoint. As soon as I can post pics of how to properly set up your rigs, I'll post it on my website. I want to make sure you can get your rigs up & running without damaging them, yourself or your personal property.

Hey, I made a quick video showing screen output from a rig - thought I'd share that.

http://youtu.be/naW5uGHLbZE

Sounds good. I think we would all love a clear estimate on when we can see a significant increase in online hash-rate.

buzzdave

vip

Activity: 472

Merit: 250

Here's the latest:

Quote

Hey guys, the first boards are shipping from the factory tomorrow. These are for 100TH rigs, but the August rigs are right on the heels of these boards (I don't know how long it takes them to make the 100TH boards). The August delivery rigs were ordered in the same batch - this is different from what I've posted previously - I had forgotten that we added to the order over the top of what was needed for 100TH.

Tytus has the software working pretty well at this point - its only consuming 25% - 30% of an rPi's processor resources, which I think is pretty amazing!

A lot of work still needs to be done around things like producing some instructions and safety recommendations. These things really are kits from that standpoint. As soon as I can post pics of how to properly set up your rigs, I'll post it on my website. I want to make sure you can get your rigs up & running without damaging them, yourself or your personal property.

Hey, I made a quick video showing screen output from a rig - thought I'd share that.

http://youtu.be/naW5uGHLbZE

TheSwede75

full member

Activity: 224

Merit: 100