Topic: PinIdea.io x11 asics (Read 6079 times)
is there a new firmware for pinidea DR3 for algo x14 support?
I believe the chips are only black until they have a decent number of shares and then they will either be green or red based on how many of those shares were listed as failed. So if it runs for a decent amount of time it should change them from black. Maybe check that auto restart setting like isoneguy suggested.
I don't have any DR2's but the DR3's seem to have a very similar web interface from the screen shots of the DR2 I have seen. My DR3's also show a lot of hashrate variance in the web interface. I have one mining on nicehash and it seems to have much less variance then the others. I also think these miners more than other asics I have owned are temperamental to temperature. They don't handle high ambient temps very well at all or they get a lot more HW failures.
I don't have any DR2's but the DR3's seem to have a very similar web interface from the screen shots of the DR2 I have seen. My DR3's also show a lot of hashrate variance in the web interface. I have one mining on nicehash and it seems to have much less variance then the others. I also think these miners more than other asics I have owned are temperamental to temperature. They don't handle high ambient temps very well at all or they get a lot more HW failures.
thx for the fast response!
the miner itself is lowered to 400mhz for more lifetime also coinmine.pl was chosen...
i will try that option to disengage the auto restart, let´s see what happens then.
but it is still weird that no monitoring is showing up and all the chips are in black colour...
any answers welcome :-)
the miner itself is lowered to 400mhz for more lifetime also coinmine.pl was chosen...
i will try that option to disengage the auto restart, let´s see what happens then.
but it is still weird that no monitoring is showing up and all the chips are in black colour...
any answers welcome :-)
Hi,
i am sry to crash in here but i found no other forum or thread for helping me out....
Problem:
bought a dr2 and it runs on the first look quiet smooth from the outside...BUT....the hashrate is moving high and low in very big scales..means from 20 up to 490..
the other thing is that there is no monitoring showed on the interface (just figured out the hs rate on the pool page)
even the graphics of the chips are not collered green even when it is running over 400 hs..
any one an idea about this?
if there is a solution i would pay fund the dude with ltc or dash
cheers!
i am sry to crash in here but i found no other forum or thread for helping me out....
Problem:
bought a dr2 and it runs on the first look quiet smooth from the outside...BUT....the hashrate is moving high and low in very big scales..means from 20 up to 490..
the other thing is that there is no monitoring showed on the interface (just figured out the hs rate on the pool page)
even the graphics of the chips are not collered green even when it is running over 400 hs..
any one an idea about this?
if there is a solution i would pay fund the dude with ltc or dash
cheers!
If you have the miner overclocked it will throw wild hashrate. The hashrate will be a little wild anyways due to the nature of pinidea gear...but overclocking the miners makes it spit out a higher variation of shares.
also, if you have it to auto restart then everytime the hashrate drops(which happens all the time) it will restart the miner and show no data on the dashboard page.
if you want the miner to run most stable point it towards coinmine.pl the suggested pool.
If you no longer want the miner pm me and maybe we can work something out.
Hi,
i am sry to crash in here but i found no other forum or thread for helping me out....
Problem:
bought a dr2 and it runs on the first look quiet smooth from the outside...BUT....the hashrate is moving high and low in very big scales..means from 20 up to 490..
the other thing is that there is no monitoring showed on the interface (just figured out the hs rate on the pool page)
even the graphics of the chips are not collered green even when it is running over 400 hs..
any one an idea about this?
if there is a solution i would pay fund the dude with ltc or dash
cheers!
i am sry to crash in here but i found no other forum or thread for helping me out....
Problem:
bought a dr2 and it runs on the first look quiet smooth from the outside...BUT....the hashrate is moving high and low in very big scales..means from 20 up to 490..
the other thing is that there is no monitoring showed on the interface (just figured out the hs rate on the pool page)
even the graphics of the chips are not collered green even when it is running over 400 hs..
any one an idea about this?
if there is a solution i would pay fund the dude with ltc or dash
cheers!
please
to all hoo buy from china
how did your devices arrive
did you paid any custom tva or tax
i will order from France, and it appear to be for sur that when it's DHL like shippement that there is a custom control --> tax when price exceed 20 €
so
ho's ordered , from where, did you have to pay something to your national custom guards???
to all hoo buy from china
how did your devices arrive
did you paid any custom tva or tax
i will order from France, and it appear to be for sur that when it's DHL like shippement that there is a custom control --> tax when price exceed 20 €
so
ho's ordered , from where, did you have to pay something to your national custom guards???
I bought a cube miner and they wrote $36 on the custom declaration, but DHL asked me to pay €26 before the flight to France.. I send a mail to baikal for next orders. I think they will change that.
I don't know how it work with pinidea but I think it's the same.
I have an Eyeboot 49 Port USB Hub 60A Power Supply and 10x DU-1 PinIdea miners I'd be willing to let go.
Only used for a month or so when I bought it all last summer. Had to pack up and power down due to personal reasons.
PM me an offer in Dash/BTC.
Only used for a month or so when I bought it all last summer. Had to pack up and power down due to personal reasons.
PM me an offer in Dash/BTC.
SCAM!
I made order with this guys 20/03 for 5xDU-1 for 0.36BTC. Received confirmation, but never received anything afterwards. Order is still there as processing, but there is no contact info or any way how to get to them. VERY LIKELY they did runner. I suggest everyone to avoid them.
I made order with this guys 20/03 for 5xDU-1 for 0.36BTC. Received confirmation, but never received anything afterwards. Order is still there as processing, but there is no contact info or any way how to get to them. VERY LIKELY they did runner. I suggest everyone to avoid them.
So you're the one that bought them out during my pinidea group buy...well done captain.
maybe employ your deductive reasoning skills before panicking and you'd have figured out how to contact them.
SCAM!
I made order with this guys 20/03 for 5xDU-1 for 0.36BTC. Received confirmation, but never received anything afterwards. Order is still there as processing, but there is no contact info or any way how to get to them. VERY LIKELY they did runner. I suggest everyone to avoid them.
I made order with this guys 20/03 for 5xDU-1 for 0.36BTC. Received confirmation, but never received anything afterwards. Order is still there as processing, but there is no contact info or any way how to get to them. VERY LIKELY they did runner. I suggest everyone to avoid them.
They should make DR3 miners or new model althougher. There is big market for X11 miners now, sadly they gone in semi-hibernation mode
I picked up a Dr2 earlier in the month for around $1500 USD and have been satisfied with its steady performance at 450Mhz thus far. The fan was louder than expected so I run it at level at 1 (not recommended, yes I know) but she hasn't breached over 34C and normally operates between 28C and 30C most of the day. I like the unit enough that I will pick a few more up when some are available. I'd also like to find some Baikal 150Mh units to stack in series as well.
Anyone have an idea on when more units might become available? I expect their prices to increase as well ...
http://imgur.com/a/9JKxl
Anyone have an idea on when more units might become available? I expect their prices to increase as well ...
http://imgur.com/a/9JKxl
Great the stuff starts to arrive 
You guys who have received the miner have any pictures of the thing?
You guys who have received the miner have any pictures of the thing?
OP said overclock is not necessarily good on hash rate. I can confirm this on my DR2. I get a much better hashrate on nicehash (450 as advertised) at the default 400Mhz value. At 450Mhz frequency, I get 100Mh/s less and not much better with values over 400.
It's quite loud
Seen 76db on a site
Stand out above the whole server room. Not kidding
You must not be running any spondoolies or bitmain gear.
It's quite loud
Seen 76db on a site
Stand out above the whole server room. Not kidding
Hi!
I got a DR2. Everything looks fine in the GUI in the miner dashboard. I get like 475H/s. 0% fail rate and almost no rejects. However, on nicehash web site, I only see X11 speed (accepted) of 315mh/s in average. Is it normal? Is it a bad stratum server for this miner?
the ping is 95ms
xnsub is enabled
didn't try to set diff in pw field. It shows 0.4 sometimes more or less.
Any advice?
I got a DR2. Everything looks fine in the GUI in the miner dashboard. I get like 475H/s. 0% fail rate and almost no rejects. However, on nicehash web site, I only see X11 speed (accepted) of 315mh/s in average. Is it normal? Is it a bad stratum server for this miner?
the ping is 95ms
xnsub is enabled
didn't try to set diff in pw field. It shows 0.4 sometimes more or less.
Any advice?
Hello
Whats the db noise level on these machines?
Hi!
I got a DR2. Everything looks fine in the GUI in the miner dashboard. I get like 475H/s. 0% fail rate and almost no rejects. However, on nicehash web site, I only see X11 speed (accepted) of 315mh/s in average. Is it normal? Is it a bad stratum server for this miner?
the ping is 95ms
xnsub is enabled
didn't try to set diff in pw field. It shows 0.4 sometimes more or less.
Any advice?
I got a DR2. Everything looks fine in the GUI in the miner dashboard. I get like 475H/s. 0% fail rate and almost no rejects. However, on nicehash web site, I only see X11 speed (accepted) of 315mh/s in average. Is it normal? Is it a bad stratum server for this miner?
the ping is 95ms
xnsub is enabled
didn't try to set diff in pw field. It shows 0.4 sometimes more or less.
Any advice?
cool i don't blame you that was more for others who want it now and can't wait like me i won't pay more either i will shop around , like i did for the A4 i bought one on Ebay with out a controller for 1099 then a member here i misunderstood said he would have sold me one for 800 so i got a refund but he said would have so i did some searching and found east shore sells and I remembered a few members here a while back told me they bought there ..
but i had to pay in bitcoin but I get 136 mh A4 with a Controller Shipped for 842 in about 8 days ...
it pays to shop around ..and make sure the seller is legit ofc
according to that site the x11 dr 3's start Shipping again on the 27th of March.
just to compare prices i went to all express i think it's called,... just to see prices ..
but i had to pay in bitcoin but I get 136 mh A4 with a Controller Shipped for 842 in about 8 days ...
it pays to shop around ..and make sure the seller is legit ofc
according to that site the x11 dr 3's start Shipping again on the 27th of March.
just to compare prices i went to all express i think it's called,... just to see prices ..
move to baikal, stray away from the dark side of x11
Have you used any pinidea gear? I think there are pros and cons to both companies, they each fill a different niche in the mining community.
So far I've had the opportunity to try both the du1 and the dr3 and have mostly good things to say about my experiences.
I'll write out a proper comparison and maybe even some guides once I'm able to get my hands on a few mini's.
i have never tried the dr3, i have tried dr1 and du1
i like baikal multi algo, and at least they have products in stock
if you want a Dr 3 i found a site that has them a few member's like philipma1957 and one or two others i know i can trust have ordered here as well as me i just bought A4 136 mh for 842 shipped here
https://www.eastshore.xyz/shop/x11-asic-miner-450mh-with-335w-dash-miner/
or if some one wants a Baikal X11 Miner 900MH/s and can't wait for the next group buy here
http://deepinthemines.com/index.php?rt=product/product&path=43_74&product_id=162
They cost a bit more because it is US based ....stuff all ways cost more in the US sadly and have for some time.
haha I am the one organiseing all these group buys, also not interested in buying from a reseller for more.
when will dr3s be back or when dr4s coming out
I would like to contact the manufacturer but I am getting no response on emails
move to baikal, stray away from the dark side of x11
Have you used any pinidea gear? I think there are pros and cons to both companies, they each fill a different niche in the mining community.
So far I've had the opportunity to try both the du1 and the dr3 and have mostly good things to say about my experiences.
I'll write out a proper comparison and maybe even some guides once I'm able to get my hands on a few mini's.
i have never tried the dr3, i have tried dr1 and du1
i like baikal multi algo, and at least they have products in stock
if you want a Dr 3 i found a site that has them a few member's like philipma1957 and one or two others i know i can trust have ordered here as well as me i just bought A4 136 mh for 842 shipped here
https://www.eastshore.xyz/shop/x11-asic-miner-450mh-with-335w-dash-miner/
or if some one wants a Baikal X11 Miner 900MH/s and can't wait for the next group buy here
http://deepinthemines.com/index.php?rt=product/product&path=43_74&product_id=162
They cost a bit more because it is US based ....stuff all ways cost more in the US sadly and has for some time.
Jump to: