Topic: Playing games while mining with the same GFX card (Read 7533 times)
I run my miner on my 6990 on GPU2 and then I just start the game up and no freezes
Also my Crysis 2 looks great too and i love it! It's just annoying the state of ATI drivers, and all my systems are freezing on any DX11 application while mining.
I am not using catalyst 11.6 due to BSOD just after installation, if they fixed the freeze it would be great!
I am not using catalyst 11.6 due to BSOD just after installation, if they fixed the freeze it would be great!
o.0 Time for me to loadup every DX11 thing i have---- OH WAIT Dirt3 runs FINE while mining, So does the Heaven 2.1 Benchmark.
I guess im gonna skip the extra testing and pretend that it's all your fault
My guess is that you are trolling as always. You lied writing "You are completely incorrect, I am loving my 6990 eyefinity, a yummy 60fps max graphics with one core and 400mhashes with the other." and i show you benchmark of a 6990 using both cores reaching 48 FPS average with eyefinity turned off.
Then you said you meant with both cores and eyefinity turned off
, but you are still outperforming benchmarks by a good 25%. You must be so good at computers for doing that! Did you write your own drivers?Oh, wait! I found a post where you needed help to overclock the 6990...
The fact is simple, you can not use any DX11 application running on the same 6900 GPU where you are mining. You can with 5800 cards , as you are most likely doing.
Aw i've been caught So Fucking Hard.
sonofabitch
Shall i delete all my posts? I will if asked too.
Edit: i was fighting for awhile because my dual 6870 rig has noproblems doing the afformention necessities (dx11game mining)
without the realisation that the 6870 and 6970 cores are apparently Much, Much more different than i had anticipated
Also my Crysis 2 looks great too and i love it! It's just annoying the state of ATI drivers, and all my systems are freezing on any DX11 application while mining.
I am not using catalyst 11.6 due to BSOD just after installation, if they fixed the freeze it would be great!
I am not using catalyst 11.6 due to BSOD just after installation, if they fixed the freeze it would be great!
o.0 Time for me to loadup every DX11 thing i have---- OH WAIT Dirt3 runs FINE while mining, So does the Heaven 2.1 Benchmark.
I guess im gonna skip the extra testing and pretend that it's all your fault
My guess is that you are trolling as always. You lied writing "You are completely incorrect, I am loving my 6990 eyefinity, a yummy 60fps max graphics with one core and 400mhashes with the other." and i show you benchmark of a 6990 using both cores reaching 48 FPS average with eyefinity turned off.
Then you said you meant with both cores and eyefinity turned off
, but you are still outperforming benchmarks by a good 25%. You must be so good at computers for doing that! Did you write your own drivers?Oh, wait! I found a post where you needed help to overclock the 6990...
The fact is simple, you can not use any DX11 application running on the same 6900 GPU where you are mining. You can with 5800 cards , as you are most likely doing.
Also my Crysis 2 looks great too and i love it! It's just annoying the state of ATI drivers, and all my systems are freezing on any DX11 application while mining.
I am not using catalyst 11.6 due to BSOD just after installation, if they fixed the freeze it would be great!
I am not using catalyst 11.6 due to BSOD just after installation, if they fixed the freeze it would be great!
o.0 Time for me to loadup every DX11 thing i have---- OH WAIT Dirt3 runs FINE while mining, So does the Heaven 2.1 Benchmark.
I guess im gonna skip the extra testing and pretend that it's all your fault
So I searched around some more, it turns out you can't use 8 gpu's while gaming, even though it works for mining.
When you just enable 4 (2 6990) it will work just fine.
The problem is, a core 2 duo or sempron used for mining will seriously bottleneck those cards. I'll try switching a few on p67 platform with i7.
When you just enable 4 (2 6990) it will work just fine.
The problem is, a core 2 duo or sempron used for mining will seriously bottleneck those cards. I'll try switching a few on p67 platform with i7.
Also my Crysis 2 looks great too and i love it! It's just annoying the state of ATI drivers, and all my systems are freezing on any DX11 application while mining.
I am not using catalyst 11.6 due to BSOD just after installation, if they fixed the freeze it would be great!
I am not using catalyst 11.6 due to BSOD just after installation, if they fixed the freeze it would be great!
I tried to run that game with the Direct X patch (11) on my 4x 6990 rig for fun, but it just said 'failed to initialize wrapper' or something. Gave up after 20 mins
Maybe it's just been too long since I played video games (I tried F.E.A.R a few years back), but I didn't find an answer online as to why Crysis wouldn't work.
Well, back to mining.. Will have to test again later, it looks nice in screenshots. Much better than anything I've seen in the past.
Maybe it's just been too long since I played video games (I tried F.E.A.R a few years back), but I didn't find an answer online as to why Crysis wouldn't work.
Well, back to mining.. Will have to test again later, it looks nice in screenshots. Much better than anything I've seen in the past.
Ahahaha. Im not a dunce.
Im am fully aware of crysis' many frequent updates. it is currently my favorite game.
And no. There are not "too many fps"
I would fucking return my card if a 6970@940 wasnt able to run crysis as i want it too
No doubt that the extra resolution reduces my frame rates.
(i conceide here)
but if i look at the ground i goto 60 XD
To clarify I forgot to tell my 6990 to use only one core.
My previous statement of 1core running crysis and the other running mining. Was false.
The miner was sitting around doing dick fuck all(connection problems) when i was running crysis, So effectively the full 6990 was running crysis. Whilst no mining was active
To retest;
I got [as you said(but in reverse)] too many fps with what i stated earlier
Flipping off eyefinity gives me what i said earlier. But with eyefinity on i drop to an unbearable 32ish fps
40 is the fucking minimum frame rate in my books.
to clarify. Yes, My crysis is updated. And looks Fucking Gorgeous
Im am fully aware of crysis' many frequent updates. it is currently my favorite game.
And no. There are not "too many fps"
I would fucking return my card if a 6970@940 wasnt able to run crysis as i want it too
No doubt that the extra resolution reduces my frame rates.
(i conceide here)
but if i look at the ground i goto 60 XD
To clarify I forgot to tell my 6990 to use only one core.
My previous statement of 1core running crysis and the other running mining. Was false.
The miner was sitting around doing dick fuck all(connection problems) when i was running crysis, So effectively the full 6990 was running crysis. Whilst no mining was active
To retest;
I got [as you said(but in reverse)] too many fps with what i stated earlier
Flipping off eyefinity gives me what i said earlier. But with eyefinity on i drop to an unbearable 32ish fps
40 is the fucking minimum frame rate in my books.
to clarify. Yes, My crysis is updated. And looks Fucking Gorgeous
All DX11 games, on 6900 cards, will lock your PC if you start it while mining, DX9 games are working fine. I did not test DX10 games.
You are completely incorrect, I am loving my 6990 eyefinity, a yummy 60fps max graphics with one core and 400mhashes with the other.
When i obey this threads 'ruleset' we'll call it, (and i just tested this) i get a horrible 139mh/s per core(2) but the game still gets a solid 60fps+
Maxedout Eyefinity on Crysis2 with the Adavanced Graphics Tweaker
Notes:AA is disabled.
All forms of PhysX are disabled
Windows7UltimateX86
-v -w128 -f350
You are completely incorrect. Crysis 2 is DX9 unless you patched it with 1.9 AND the DX11 patch. Thing that you did NoT do not for sure, too many FPS with only 1 6990.
http://www.ctrlaltkill.org/2011/06/27/crysis-2-dx9-vs-dx11-benchmarks-time-to-upgrade-again/
I was able to play it while mining, now I can't anymore.
All DX11 games, on 6900 cards, will lock your PC if you start it while mining, DX9 games are working fine. I did not test DX10 games.
You are completely incorrect, I am loving my 6990 eyefinity, a yummy 60fps max graphics with one core and 400mhashes with the other.
When i obey this threads 'ruleset' we'll call it, (and i just tested this) i get a horrible 139mh/s per core(2) but the game still gets a solid 60fps+
Maxedout Eyefinity on Crysis2 with the Adavanced Graphics Tweaker
Notes:AA is disabled.
All forms of PhysX are disabled
Windows7UltimateX86
-v -w128 -f350
I can play UrbanTerror (OpenGL game) with a miner in the background.
If I start UrT while mining, I get a crash.
*However*, if I start UrT, ALT-TAB out of the game, start the miner then just as the miner is starting ALT-TAB *back* in to the game, everything works. From then on I can ALT-TAB whenever I want, it runs perfectly for hours.
I'm running the latest Phoenix w/ Cat 10.6, MSI 6870 Hawk, Afterburner to control clocks.
I can set Aggression to about 5 without any fps loss or lag. I get minor lag on 6 and it increases at 7 and up.
I get around 150-250 MH/sec out of the 300 maximum. Much better than 0.
Additionally, Far Cry 2 (which I got with the card) seems to run fine without crashes, regardless of the above.
If I start UrT while mining, I get a crash.
*However*, if I start UrT, ALT-TAB out of the game, start the miner then just as the miner is starting ALT-TAB *back* in to the game, everything works. From then on I can ALT-TAB whenever I want, it runs perfectly for hours.
I'm running the latest Phoenix w/ Cat 10.6, MSI 6870 Hawk, Afterburner to control clocks.
I can set Aggression to about 5 without any fps loss or lag. I get minor lag on 6 and it increases at 7 and up.
I get around 150-250 MH/sec out of the 300 maximum. Much better than 0.
Additionally, Far Cry 2 (which I got with the card) seems to run fine without crashes, regardless of the above.
Good to know! I'll have to try running Civilization 5 in DX9.
All DX11 games, on 6900 cards, will lock your PC if you start it while mining, DX9 games are working fine. I did not test DX10 games.
Update: This issue seems to depend upon the game. Civilization 5 doesn't want to share resources with the miners, and results in a system crash. However, Neverwinter Nights 2 and Fallout New Vegas work great with just the -f60 flag, even running through a GFX card on a PCIe x8 slot.
Raise the F if the game is not smooth, I can play the most BASIC of video games (Touhou 12) and i lag without the F up at 250
I also played games while mining. And although i mined slower(obviously) i had the perfect settings. The game wasn't as smooth, but it worked.
Your monitor can display 1024 frames ? Really 
-f 60 (frames) is usually the max. If it hangs your computer is unstable.
-f 60 (frames) is usually the max. If it hangs your computer is unstable.
I fucking hate noobs
But Yes, If it hangs, Your system is unstable.
I have two 6870's crossfire'd in my main comp
GPU0=940core 1150mem
GPU1=1000core 1200mem
Running at -v -w128 -f250
Crysis 2+advanced graphics options=No lag
No need to stop a GPU.
When i had GPU0 at 965core, i could mine with it But games would crash while the miner was running, Turn off the miner, and games EVENTUALLY crash
If you think it's the OpenCL bug, Then try placing the core affinity on ALL gpu's to just one core, BTW if you have more than 1 GPU, OpenCL will Peg one of your cores at 100%
Even with the bug Activly Fucking my 6th core really hard Crysis 2 runs Perfect whilst mining
Good to know, Garrett. Is this an ATI/AMD problem, meaning could I share feedback with them about this and ask for a software update that doesn't have that problem?
The 69xx series has a known problem where anything using OpenCL doesn't share resources with other programs.
Those cards will all lock.
Those cards will all lock.
"Consider playing Minesweeper instead of Black Ops if you must game on a computer that is actively mining"
Jump to: