anyone tried new catalyst 11.3 to see if it fixed the freezing problems?
Topic: poclbm mining problems with 6950 - page 3. (Read 15903 times)
VMR-9?
as for mpc-hc it will work just fine with output set to vmr-9 instead of default evr
most annoying thing is flash, even with flashblock i keep forgetting and have 2-3 restarts a day
typo corrected
most annoying thing is flash, even with flashblock i keep forgetting and have 2-3 restarts a day
typo corrected
Can confirm same issues when trying any video playback (Youtube, MPC-HC, etc.)
6950 with w7 x64 - 11.4 and OpenCL2.4 (same issue with OCL 2.3 and 11.2).
6950 with w7 x64 - 11.4 and OpenCL2.4 (same issue with OCL 2.3 and 11.2).
The third digit is the relative quality, within a series- a 5850 is less powerful than a 5870
3rd digit here is 5 & 7 at 5850 & 5870.
Typically, a card of a higher series will always have more processing power than a card in a lower series, even if the relative quality is better (a 5770 will be outperformed by a 5850).
Means a 5870 will be speeder than a 5850 & also a 5950 will be speeder than or equal to 5850 , but speeder than 5870.
(I know 5950 doesn't exist, just for theoretical comparison)
The max speed order will be like
5950
5870
5850
or
5950>=5870
5870>5850
The second digit also says about performance. the higher the number the more the speed/performance.
so, naturally a 6950 >= 6870
http://en.wikipedia.org/wiki/Radeon#Naming_scheme
5000 series works best with 10.12 & 2.1 sdk, & 6000 series works with 11.2 & 2.3 APP
3rd digit here is 5 & 7 at 5850 & 5870.
Typically, a card of a higher series will always have more processing power than a card in a lower series, even if the relative quality is better (a 5770 will be outperformed by a 5850).
Means a 5870 will be speeder than a 5850 & also a 5950 will be speeder than or equal to 5850 , but speeder than 5870.
(I know 5950 doesn't exist, just for theoretical comparison)
The max speed order will be like
5950
5870
5850
or
5950>=5870
5870>5850
The second digit also says about performance. the higher the number the more the speed/performance.
so, naturally a 6950 >= 6870
http://en.wikipedia.org/wiki/Radeon#Naming_scheme
5000 series works best with 10.12 & 2.1 sdk, & 6000 series works with 11.2 & 2.3 APP
The 6870 isn't affected, the 6950 is...
The way you install your drivers, or how you are running poclbm, they won't make a difference. Any combination of Stream/gpgpu work + UVD will lock the card.
Since the 10.4 early preview doesn't have it fixed, chances are we will have to wait at least until the 10.5 drivers for a fix.
Since the 10.4 early preview doesn't have it fixed, chances are we will have to wait at least until the 10.5 drivers for a fix.
U meaning UVD by saying accelerated video output (overlay), using hardware acceleration?
If yes, then is it the one in red circle in this post?
https://bitcointalksearch.org/topic/m.66990
Then as i said in that post, i am running miner with out any problem when watching videos with -f1.
My miners got never affected, but my videos get affect. It moves frame by frame & audio is slightly slow i can say. But watching video is frame by frame on a mkv, avi, dflv,divx.....files. But miner never gets affected & so do core clock or mem clock.
I think you installing the catalyst control center comes with ati driver..& hydra....many extra things that causes the problem.
As i said before, just install ati display driver, app 2.3, catalyst INSTALL manager (NOT CONTROL) & vc++. The system must be fine at least with one card.
I can't able to test with 2 cards as my mobo has one pci ex only. If not i can easily check with my old 9400GT.
I am using now windows 7 32 bit, HD6870 card & mining at 270 Mhash/s after some Over clocking.
The way you install your drivers, or how you are running poclbm, they won't make a difference. Any combination of Stream/gpgpu work + UVD will lock the card.
Since the 10.4 early preview doesn't have it fixed, chances are we will have to wait at least until the 10.5 drivers for a fix.
Since the 10.4 early preview doesn't have it fixed, chances are we will have to wait at least until the 10.5 drivers for a fix.
My idea is install 11.2 & 2.3 for both the cards.
When installing, install only these 4 & don't install anyother.
ATI display driver, APP 2.3, Ati catalyst install manager, VC++ These 4 only.
Before installing this, uninstall everything of ati drivers using some uninstallers like REVO uninstaller.
In REVO uninstaller select advanced to completely remove everything of ati drivers.
It must solve your problem.
You need to install drivers 2 times. First install 5000 series card & driver, then insert 6000 series card in system & install driver for that.
Also in pocblm use these flag only -v -w128. only these 2, -v= vectors & -w=worksize
When installing, install only these 4 & don't install anyother.
ATI display driver, APP 2.3, Ati catalyst install manager, VC++ These 4 only.
Before installing this, uninstall everything of ati drivers using some uninstallers like REVO uninstaller.
In REVO uninstaller select advanced to completely remove everything of ati drivers.
It must solve your problem.
You need to install drivers 2 times. First install 5000 series card & driver, then insert 6000 series card in system & install driver for that.
Also in pocblm use these flag only -v -w128. only these 2, -v= vectors & -w=worksize
I have the same problem too. It's very likely driver related, since it also happened on the 5850, but it was fixed on that around catalyst 10.3. Whenever the UVD functions are accessed on the card when GPGPU / Stream applications are running, the thing locks up HARD. It also affects other gpgpu apps, I can confirm ighashgpu doing it.
What OS are you running? I had the problem on Vista x86 with a 5850 (fixed in Catalyst 10.3), and now on Win7 x64 with a 6950 (not fixed so far).
What OS are you running? I had the problem on Vista x86 with a 5850 (fixed in Catalyst 10.3), and now on Win7 x64 with a 6950 (not fixed so far).
just found your another post - it is w7 x64 and i can confirm gpuz issue too
Driver issue related buddy, was you using youtube/flash player/video player at the same with ? If yes, your screen will be freeze when you turn poclbm on =D , I'm using 6950 and have exactly the same problem.
Just some guesses, but try it without "--vectors --worksize=128". Also, does it happen when you have it overclocked or otherwise?
I have the same problem too. It's very likely driver related, since it also happened on the 5850, but it was fixed on that around catalyst 10.3. Whenever the UVD functions are accessed on the card when GPGPU / Stream applications are running, the thing locks up HARD. It also affects other gpgpu apps, I can confirm ighashgpu doing it.
What OS are you running? I had the problem on Vista x86 with a 5850 (fixed in Catalyst 10.3), and now on Win7 x64 with a 6950 (not fixed so far).
What OS are you running? I had the problem on Vista x86 with a 5850 (fixed in Catalyst 10.3), and now on Win7 x64 with a 6950 (not fixed so far).
small update:
it is just graphic card that freezes
i can continue skype call for another 20 minutes without any problems even when nothing changes on the screen, mouse and keyboard seems dead though
happened again when i just entered 'video' tab in catalyst control centre during skype conversation so i guess it may be just some software glitch
will try to setup another windows installation tomorrow and will see if it happen again
it is just graphic card that freezes
i can continue skype call for another 20 minutes without any problems even when nothing changes on the screen, mouse and keyboard seems dead though
happened again when i just entered 'video' tab in catalyst control centre during skype conversation so i guess it may be just some software glitch
will try to setup another windows installation tomorrow and will see if it happen again
had 5870 and 5970 (both working in another dedicated machine now) and almost all possible driver & stream combinations - everything worked fine
yesterday i swapped 5970 in my desktop with 6950 and problems started
when i have poclbm running (poclbm.exe --verbose --vectors --worksize=128 --frames=120 --host=deepbit.net --port=8332 --user=xxxxx@xxxxx --pass=xxxxx --device=0)
i have 297-335 Mhash/s (depending if it is overclocked and shaders unlocked or not)
but my system freeze instantly (before playback actually starts) when try to play any video in media player classic or flash video in browser
that never happened before with 5870 or 5970, psu is fine and i can put 5970 and 5870 at the same time without problems
6950 seems completely stable (furmark, crysis warhead, futuremark) and i can play videos for hours without any problems (with both oc or default, and same with shaders) and stays below 80 celsius
what i tried so far:
uninstalled and used driver sweper on all ati stuff, tried fresh installations of 10.11, 11.2 and 11.4
it is mining ok, but it stays the same - i have instant (with 10.11 not instant - i can move cursor for few more seconds) freeze - happens only with poclbm running
will try diablo tomorrow, anyone have any other ideas what to check?
yesterday i swapped 5970 in my desktop with 6950 and problems started
when i have poclbm running (poclbm.exe --verbose --vectors --worksize=128 --frames=120 --host=deepbit.net --port=8332 --user=xxxxx@xxxxx --pass=xxxxx --device=0)
i have 297-335 Mhash/s (depending if it is overclocked and shaders unlocked or not)
but my system freeze instantly (before playback actually starts) when try to play any video in media player classic or flash video in browser
that never happened before with 5870 or 5970, psu is fine and i can put 5970 and 5870 at the same time without problems
6950 seems completely stable (furmark, crysis warhead, futuremark) and i can play videos for hours without any problems (with both oc or default, and same with shaders) and stays below 80 celsius
what i tried so far:
uninstalled and used driver sweper on all ati stuff, tried fresh installations of 10.11, 11.2 and 11.4
it is mining ok, but it stays the same - i have instant (with 10.11 not instant - i can move cursor for few more seconds) freeze - happens only with poclbm running
will try diablo tomorrow, anyone have any other ideas what to check?
Jump to: