Topic: [POOL] --- Coinotron --- RavenCoin PPS: 1.5% ----- PPLNS, RBPPS: 0% --------- - page 20. (Read 295319 times)
January 24, 2017, 02:46:02 PM
any plans for XMR pool?
January 22, 2017, 05:31:18 AM
FYI
ETH getwork port will be closed on 2017-01-24 13:00 UTC.
Please switch your miners to Stratum compatible and port 3344.
ETH getwork port will be closed on 2017-01-24 13:00 UTC.
Please switch your miners to Stratum compatible and port 3344.
January 22, 2017, 05:30:23 AM
for now I'll use Claymore with the Fee off on the SSL/TLS port till it's sorted or gate less gets faster which next release it may, is that cool ? . in the mean time if you need me to test more settings , just ask .
Yes, I think is the best workaround.
I will test this issue in my test env.
January 21, 2017, 07:46:32 AM
for now I'll use Claymore with the Fee off on the SSL/TLS port till it's sorted or gate less gets faster which next release it may, is that cool ? . in the mean time if you need me to test more settings , just ask .
January 21, 2017, 04:50:21 AM
Please try with:
"no-extranonce": false,
"no-extranonce": false,
I tried
Code:
"no-extranonce": false,
in conf file abd this way Code:
gatelessgate.exe -k equihash -o stratum+tcp://coinotron.com:3346 -u -p x --no-extranonce
gatelessgate.exe -k equihash -o stratum+tcp://coinotron.com:3346 -u -p x
gatelessgate.exe -k equihash -o stratum+tcp://coinotron.com:3346 -u -p x
and it still hangs and if it does connect it doesn't all ways to go at the right speed either ..
Code:
Gateless Gate v0.1.2 - Started: [2017-01-21 04:32:17] - [0 days 00:07:08]
--------------------------------------------------------------------------------
(5s):96.21 (avg):95.51h/s | A:0 R:0 HW:0 WU:0.000/m
ST: 1 SS: 0 NB: 1 LW: 476 GF: 0 RF: 0
Connected to coinotron.com (stratum) diff 1.000 as user
Block: 0000000... Diff:0 Started: [04:32:15] Best share: 0
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 46.0C 2833RPM | 96.41/ 95.51h/s | R: 0.0% HW:0 WU:0.000/m I: 8
--------------------------------------------------------------------------------
[04:32:14] Started Gateless Gate v0.1.2
[04:32:14] * using Jansson 2.9
[04:32:14] Probing for an alive pool
[04:32:15] coinotron.com extranonce set to 2C350000000000000000000000000000
[04:32:15] coinotron.com target changed to 0000ffffffff0000000000000000000000000000000000000000000000000000
[04:32:15] Startup GPU initialization... Using settings from pool coinotron.com.
[04:32:15] Startup Pool No = 0
[04:32:15] Initialising kernel equihash.cl with nfactor 10, n 1024
--------------------------------------------------------------------------------
(5s):96.21 (avg):95.51h/s | A:0 R:0 HW:0 WU:0.000/m
ST: 1 SS: 0 NB: 1 LW: 476 GF: 0 RF: 0
Connected to coinotron.com (stratum) diff 1.000 as user
Block: 0000000... Diff:0 Started: [04:32:15] Best share: 0
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 46.0C 2833RPM | 96.41/ 95.51h/s | R: 0.0% HW:0 WU:0.000/m I: 8
--------------------------------------------------------------------------------
[04:32:14] Started Gateless Gate v0.1.2
[04:32:14] * using Jansson 2.9
[04:32:14] Probing for an alive pool
[04:32:15] coinotron.com extranonce set to 2C350000000000000000000000000000
[04:32:15] coinotron.com target changed to 0000ffffffff0000000000000000000000000000000000000000000000000000
[04:32:15] Startup GPU initialization... Using settings from pool coinotron.com.
[04:32:15] Startup Pool No = 0
[04:32:15] Initialising kernel equihash.cl with nfactor 10, n 1024
I let it set for 2 hours one day and it still didn't connect or did but only with one card.
Please provide me with output from winmrt. ( send it to [email protected] )
Run winmrt when those conection issues are happening, option without solving domain names, from your location to our server: 178.217.186.125
January 20, 2017, 04:48:29 PM
Please try with:
"no-extranonce": false,
"no-extranonce": false,
January 19, 2017, 12:37:13 PM
hey thanks again
this is not a request , can i set the Difficulty, or does your Pool work that way np if not. just asking to know not to have it added ... ...
this is not a request , can i set the Difficulty, or does your Pool work that way np if not. just asking to know not to have it added ... ...
We have static difficulty on each port. So just don't use it in command you are using to start mining.
January 19, 2017, 12:13:31 PM
hey thanks again
this is not a request , can i set the Difficulty, or does your Pool work that way np if not. just asking to know not to have it added ... ...
this is not a request , can i set the Difficulty, or does your Pool work that way np if not. just asking to know not to have it added ... ...
January 18, 2017, 08:46:21 AM
We've added support for ZEC miner: Gateless Gate
https://bitcointalksearch.org/topic/gateless-gate-sharp-138-30mhs-ethash-on-rx-480-1716584
https://bitcointalksearch.org/topic/gateless-gate-sharp-138-30mhs-ethash-on-rx-480-1716584
January 18, 2017, 02:39:20 AM
Starting today, automatic payouts will be processed every 60 minutes
January 18, 2017, 12:59:49 AM
hey and h i
This Software miners doesn't work on your site
Gateless Gate
https://bitcointalksearch.org/topic/gateless-gate-sharp-138-30mhs-ethash-on-rx-480-1716584
it is A Fork of SGMiner-GM: sgminer-gm-5.5.5
for ZEC that is Open Source i would have been using it all along over CM but for reason we all know what they are till now there wasn't a good enough Open Source miner, there is now
.
when I try to use it on coinotron.com i get this , if you need my setting I will post them if asked but i don't think you do ...
kind of why i haven't been here for a few days mining i all most don't use Claymore miner any more .
It does work on pools like
flypool , antpools Zec pool i don't use many other pools other then this one, flypool or zec antpool.
This Software miners doesn't work on your site
Gateless Gate
https://bitcointalksearch.org/topic/gateless-gate-sharp-138-30mhs-ethash-on-rx-480-1716584
it is A Fork of SGMiner-GM: sgminer-gm-5.5.5
for ZEC that is Open Source i would have been using it all along over CM but for reason we all know what they are till now there wasn't a good enough Open Source miner, there is now
. when I try to use it on coinotron.com i get this , if you need my setting I will post them if asked but i don't think you do ...
Code:
[00:49:28] No servers were found that could be used to get work from.
[00:49:28] Please check the details from the list below of the servers you have input
[00:49:28] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[00:49:28] Pool: 0 URL: stratum+tcp://coinotron.com:3346 User: Password: x
[00:49:28] Press any key to exit, or sgminer will try again in 15s.
[00:49:43] coinotron.com extranonce set to 08000110
[00:49:43] coinotron.com difficulty changed to 8
[00:49:44] No servers were found that could be used to get work from.
[00:49:44] Please check the details from the list below of the servers you have input
[00:49:44] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[00:49:44] Pool: 0 URL: stratum+tcp://coinotron.com:3346 User: Password: x
[00:49:44] Press any key to exit, or sgminer will try again in 15s.
[00:49:59] coinotron.com extranonce set to 08000111
[00:49:59] coinotron.com difficulty changed to 8
[00:50:00] No servers were found that could be used to get work from.
[00:50:00] Please check the details from the list below of the servers you have input
[00:50:00] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[00:50:00] Pool: 0 URL: stratum+tcp://coinotron.com:3346 User: Password: x
[00:50:00] Press any key to exit, or sgminer will try again in 15s.
[00:49:28] Please check the details from the list below of the servers you have input
[00:49:28] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[00:49:28] Pool: 0 URL: stratum+tcp://coinotron.com:3346 User: Password: x
[00:49:28] Press any key to exit, or sgminer will try again in 15s.
[00:49:43] coinotron.com extranonce set to 08000110
[00:49:43] coinotron.com difficulty changed to 8
[00:49:44] No servers were found that could be used to get work from.
[00:49:44] Please check the details from the list below of the servers you have input
[00:49:44] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[00:49:44] Pool: 0 URL: stratum+tcp://coinotron.com:3346 User: Password: x
[00:49:44] Press any key to exit, or sgminer will try again in 15s.
[00:49:59] coinotron.com extranonce set to 08000111
[00:49:59] coinotron.com difficulty changed to 8
[00:50:00] No servers were found that could be used to get work from.
[00:50:00] Please check the details from the list below of the servers you have input
[00:50:00] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[00:50:00] Pool: 0 URL: stratum+tcp://coinotron.com:3346 User: Password: x
[00:50:00] Press any key to exit, or sgminer will try again in 15s.
kind of why i haven't been here for a few days mining i all most don't use Claymore miner any more .
It does work on pools like
flypool , antpools Zec pool i don't use many other pools other then this one, flypool or zec antpool.
January 17, 2017, 08:54:58 AM
quick question on the dashboard ! On ZEC everything works, you see for example 0.1% stales, errors, etc. But for ETH every worker has 0.0% in each column. Just wondering if thats normal, stats are fun
There are very few stales in ETH because of uncle system. We accept shares up to 5 blocks old.
January 17, 2017, 08:49:29 AM
quick question on the dashboard ! On ZEC everything works, you see for example 0.1% stales, errors, etc. But for ETH every worker has 0.0% in each column. Just wondering if thats normal, stats are fun
January 17, 2017, 01:43:21 AM
Help I have Google Authenticator enabled I tried to enable my payout by putting in the code and hitting resend but your system will NOT send me an email so I can not unlock my payouts at all!
January 16, 2017, 09:39:12 PM
ZEC pool:
also since the end of no fee latency has increased to well over 230 ms, east coast of usa - 3% PPS
- 2% RBPPS
- 1% PPLNS
We didn't change anything in our setup.
Fortunately in case of ZEC latency is not as much critical as in case of ETH/ETC. In ZEC network 100 ms latency increases probability of getting stale share by about 0.07 %
Nonetheless we are working on adapting pool's backend to support multiple pool servers. As soon as it is completed we will setup pool in US.
January 16, 2017, 04:34:15 PM
ZEC pool:
also since the end of no fee latency has increased to well over 230 ms, east coast of usa - 3% PPS
- 2% RBPPS
- 1% PPLNS
We didn't change anything in our setup.
Fortunately in case of ZEC latency is not as much critical as in case of ETH/ETC. In ZEC network 100 ms latency increases probability of getting stale share by about 0.07 %
Nonetheless we are working on adapting pool's backend to support multiple pool servers. As soon as it is completed we will setup pool in US.
January 16, 2017, 10:39:31 AM
ZEC pool:
also since the end of no fee latency has increased to well over 230 ms, east coast of usa - 3% PPS
- 2% RBPPS
- 1% PPLNS
January 15, 2017, 03:08:50 PM
ZEC pool:
- 3% PPS
- 2% RBPPS
- 1% PPLNS
January 11, 2017, 02:59:32 PM
No, there was no such option, only pplns and all mined zec comes to account after few days. As coinotron says pps pool need much more hash power or will be waste of resources.
You can change it anytime you want. Go to "My account" page, "Workers" tab. There you can change reward type for all workers you have.
January 11, 2017, 06:03:55 AM
No, there was no such option, only pplns and all mined zec comes to account after few days. As coinotron says pps pool need much more hash power or will be waste of resources.
Jump to: