Topic: [POOL] YAAMP.COM multipool multialgo profit switch with exchange - page 42. (Read 181262 times)
September 16, 2015, 03:09:01 PM
i didnt manually stopped it, will double check why it was stopped
September 16, 2015, 01:22:07 PM
When the coin payout LyraBar with http://yiimp.ccminer.org/. Why did you remove it from the site algo ? Return ..
July 28, 2015, 04:20:30 AM
Yet Another YAAMP based multipool.
Not that many coins for now, but we'll add more soon.
http://hashpower.co
No scrypt coins to mine?Not that many coins for now, but we'll add more soon.
http://hashpower.co
miningcores.com has scrypt mining
July 27, 2015, 04:56:57 PM
Hi guys
i need a bit of help setting this up
http://151.80.206.104
this is where i got to but nothing else works
has anyone got a proper install guid for this ?
i need a bit of help setting this up
http://151.80.206.104
this is where i got to but nothing else works
has anyone got a proper install guid for this ?
July 23, 2015, 04:16:42 AM
ive pushed my changes in a new yiimp branch,
This branch is set up to allow to run the system like normal individual pools without automatic exchange, which can be dangerous for you AND for the coin market.
This branch is set up to allow to run the system like normal individual pools without automatic exchange, which can be dangerous for you AND for the coin market.
July 22, 2015, 01:35:43 PM
It is highly recommended to start from this fork if anyone has the idea to do anything with the yaamp code.
https://github.com/tpruvot/yiimp
Tx
I have at least 50 local commits here to submit later... some for fedora, some new algos, some new "dangerous" yiic commands (distclean deleteuser) and new exchanges/markets apis (alcurex,banx and cryptopia)ive done a push request to yiimp moving exchangekeys/secrets into serverconfig instead of spread all over the code
July 13, 2015, 11:46:20 PM
bleutrade is already handled
nice
...tanx ...
#crysx
July 13, 2015, 01:54:47 PM
bleutrade is already handled
July 12, 2015, 11:04:17 PM
It is highly recommended to start from this fork if anyone has the idea to do anything with the yaamp code.
https://github.com/tpruvot/yiimp
Tx
I have at least 50 local commits here to submit later... some for fedora, some new algos, some new "dangerous" yiic commands (distclean deleteuser) and new exchanges/markets apis (alcurex,banx and cryptopia)sounds great ...
bleutrade? ...
i would like to see that exchange implemented if it can be done ...
tanx ...
#crysx
July 12, 2015, 09:14:40 PM
It is highly recommended to start from this fork if anyone has the idea to do anything with the yaamp code.
https://github.com/tpruvot/yiimp
Tx
I have at least 50 local commits here to submit later... some for fedora, some new algos, some new "dangerous" yiic commands (distclean deleteuser) and new exchanges/markets apis (alcurex,banx and cryptopia) July 12, 2015, 10:23:50 AM
Yet Another YAAMP based multipool.
Not that many coins for now, but we'll add more soon.
http://hashpower.co
No scrypt coins to mine? Not that many coins for now, but we'll add more soon.
http://hashpower.co
July 11, 2015, 10:34:10 AM
It is highly recommended to start from this fork if anyone has the idea to do anything with the yaamp code.
https://github.com/tpruvot/yiimp
July 08, 2015, 09:13:36 AM
i will do a thread for yiimp, but it will never do auto exchange... only mining ccminer/cpuminer compatible coins
I was tired to search pools for some algos, so having our own one to do tests is very useful. I'm adding algos one by one and check if all is ok...
Actually yaamp doesnt seems ready at all to mine "multialgos" coins... its one of my current tests...
I was tired to search pools for some algos, so having our own one to do tests is very useful. I'm adding algos one by one and check if all is ok...
Actually yaamp doesnt seems ready at all to mine "multialgos" coins... its one of my current tests...
July 08, 2015, 08:56:48 AM
Any chance cryptonight could get into this multiago pool? I think tsivs ccminer code would need to be plopped into the regular ccminer code (he eventually stripped all algos except cryptonight from his fork.
ffpool and hashpower each have their own thread now so you might be better off posting your request there.
yiimp is a test pool so probably isn't suitable.
The biggest ccminer forks are produced by Epsylon3 and SP_. They also each have their own thread
tracking their development.
I think it's a great idea to get cryptonight in a yaamp clone. I'm not aware of any existing cryptonight pools
that auto exchange.
July 08, 2015, 05:12:41 AM
Any chance cryptonight could get into this multiago pool? I think tsivs ccminer code would need to be plopped into the regular ccminer code (he eventually stripped all algos except cryptonight from his fork.
July 06, 2015, 12:39:03 AM
yep, i need to read the code about these estimations... doesnt look good :p
drop algo is not on my ccminer (its nscrypto one, the dropcoin dev), c11 is supported on my linux branch... didnt released the v1.6.6 yet
drop algo is not on my ccminer (its nscrypto one, the dropcoin dev), c11 is supported on my linux branch... didnt released the v1.6.6 yet
looking forward to the changes mate ...
#crysx
July 06, 2015, 12:36:12 AM
We had plans to extend stratum with support for switching algos without connect interruption, but it turned out that disconnects are very tiny issue when miner is switching algo. The most time is taken for switching gpu kernel. Thus we decided not to persuade this since miners wouldn't benefit at all, but rather made miners switch algos more rarely. There are no issues with multialgo switching for about a year now. If you have them, you should really check out mining software or proxy software you use, because there is something seriously wrong.
hence the rebuild of the farm - the software - and the systems we have in place ...
...#crysx
just changed over to the eu stratum for testing over the next few days ...
we are using the exact same setup as the usa stratum - but just diverted the hashflow ...
https://www.nicehash.com/?p=miners&a=12&addr=15umzHXF8NzXA4FywmeFbrDHgL8WcPs3wx ...
will keep an eye on the share rejections ...
will also be testing the current pools that are active with yaamp code soon via quark with the same settings ...
though that will probably happen next week ... too much to do in the backend at the moment ...
#crysx
July 05, 2015, 05:22:12 PM
yep, i need to read the code about these estimations... doesnt look good :p
drop algo is not on my ccminer (its nscrypto one, the dropcoin dev), c11 is supported on my linux branch... didnt released the v1.6.6 yet
drop algo is not on my ccminer (its nscrypto one, the dropcoin dev), c11 is supported on my linux branch... didnt released the v1.6.6 yet
July 05, 2015, 04:12:23 PM
Profit estimates on yiimp seem off. For example zr5 in the pool status shows an estimate
of .0001 for the current & 24 hr estimate but .7772 for the 24 hr actual and in the pool
details it shows ziftr paying .0014. Also the block reward in the pool details is different
from the block list. The other clones seem to have got it right.
I also noticed that yiimp mines two algos not supported in Epsylon3's fork of ccminer.
I presume they will be added shortly as there appear to be open source versions of
ccminer for both floating around.
of .0001 for the current & 24 hr estimate but .7772 for the 24 hr actual and in the pool
details it shows ziftr paying .0014. Also the block reward in the pool details is different
from the block list. The other clones seem to have got it right.
I also noticed that yiimp mines two algos not supported in Epsylon3's fork of ccminer.
I presume they will be added shortly as there appear to be open source versions of
ccminer for both floating around.
July 05, 2015, 04:03:10 PM
Just want to chime in to say that so far I've received BTC payments from both the http://ffpool.net and http://hashpower.co pools; good stuff, guys.
Thanks for that info.
Jump to: