Pages:
Author

Topic: [PPS multipool] NiceHash.com pool - higher profits than direct mining BTC! - page 10. (Read 98715 times)

legendary
Activity: 1736
Merit: 1006
someone make one more screanshot of a configuration of your S5? so I see how you've set the pass? p = 00126,? because I've tried it, but my miners not depart they remain stationary

no spaces and lowercase p..
so

p=0.0126

but then you wont mine much at that price.. it hasnt been that high in awhile.

hero member
Activity: 798
Merit: 1000
someone make one more screanshot of a configuration of your S5? so I see how you've set the pass? p = 00126,? because I've tried it, but my miners not depart they remain stationary
full member
Activity: 140
Merit: 100
Get Free Mobile Data http://get.kickbit.com/1/oexq
I love mining with their multi alg thing with 3 280x Smiley
legendary
Activity: 4326
Merit: 8950
'The right to privacy matters'
 my 2 avalon 4.1's are good to go.    they work well on nicehash or westhash.
legendary
Activity: 1456
Merit: 1000
whatever coin you guys were mining today bugged out my s5 again.
it caused it to jam up and throw out 100,000 HWE with 0.00 hash rate.

i had to turn it off and back on again.. the s3s worked just fine..



Not all S5's seem to like mining here. It can go wrong and you will just get a huge reject/hwe.   They did create a S5 firmware that makes it work perfect with nice hash, no it's not an official firmware.

I personally have used it on my C1's and S4's, but I have not been brave enough to do it on my S5.  You will find others who have though.

If you are just going to mine here and no where else you might look at firmware, but be careful as I'm not sure what unofficial firmware does to warranty.

with the new 3% fee the price would have to go up pretty high to mine here..
with all the issues, it might not be worth it.

my s3s dont have any problems. i guess bitmain needs to come up with a fix for the s5.


I only mine here when it hit's the 20+ mark.   So not really a issue for me.  No it's not my daily pool.  But at certain times it is great little bonus on mining.

It looks like plus 10 right now so it's higher then fee, and 7 more percent.  Not enough where I move my rigs here.  But I will agree 7 percent is a decent number.  I watch it closly as during last week I saw some times it was as low as negative 8 percent.  I think that is something that should not happen.  I suggested ideas to stop it.
legendary
Activity: 1736
Merit: 1006
whatever coin you guys were mining today bugged out my s5 again.
it caused it to jam up and throw out 100,000 HWE with 0.00 hash rate.

i had to turn it off and back on again.. the s3s worked just fine..



Not all S5's seem to like mining here. It can go wrong and you will just get a huge reject/hwe.   They did create a S5 firmware that makes it work perfect with nice hash, no it's not an official firmware.

I personally have used it on my C1's and S4's, but I have not been brave enough to do it on my S5.  You will find others who have though.

If you are just going to mine here and no where else you might look at firmware, but be careful as I'm not sure what unofficial firmware does to warranty.

with the new 3% fee the price would have to go up pretty high to mine here..
with all the issues, it might not be worth it.

my s3s dont have any problems. i guess bitmain needs to come up with a fix for the s5.
legendary
Activity: 1456
Merit: 1000
whatever coin you guys were mining today bugged out my s5 again.
it caused it to jam up and throw out 100,000 HWE with 0.00 hash rate.

i had to turn it off and back on again.. the s3s worked just fine..



Not all S5's seem to like mining here. It can go wrong and you will just get a huge reject/hwe.   They did create a S5 firmware that makes it work perfect with nice hash, no it's not an official firmware.

I personally have used it on my C1's and S4's, but I have not been brave enough to do it on my S5.  You will find others who have though.

If you are just going to mine here and no where else you might look at firmware, but be careful as I'm not sure what unofficial firmware does to warranty.
legendary
Activity: 1736
Merit: 1006
whatever coin you guys were mining today bugged out my s5 again.
it caused it to jam up and throw out 100,000 HWE with 0.00 hash rate.

i had to turn it off and back on again.. the s3s worked just fine..

member
Activity: 64
Merit: 10
0.0127 right now!

But I'm sure it wont last long
member
Activity: 64
Merit: 10
Also, OP you may want to update the thread title to say 3% fee.  I know it was only recently changed it but people might find it misleading.
member
Activity: 64
Merit: 10
The idle bug is still there with the firmware from the site for the S4 tested it today and the S4 dropped. Any help would greatly be appreciated. Thanks 

Does the latest S4 firmware from Bitmain have the idle bug?  I would rather have reliable switching between nicehash and my backup pool using "p=0.0xx" versus using the firmware from Nicehash just to have extranonce subscription.
hero member
Activity: 537
Merit: 524
my question is: what is set P = price? that is, what advantage do you get?

The rate on nicehash paid to miners is sometimes below what you would get on a normal pool. To avoid that you input p=0.011 for instance so you only rent your rigs out when nicehash pays more then a normal pool.


edit:

screenshot of the rate paid to miners from https://www.nicehash.com/index.jsp?p=stats



As you can see there are times when miners only get paid 0.0096 btc/TH/day. F2pool rate for instance is currently 0.01014056*  

*not sure if their 4% fee is already subtracted but even we take that out it pays 0.009735 which is more then nicehash
hero member
Activity: 798
Merit: 1000
my question is: what is set P = price? that is, what advantage do you get?
legendary
Activity: 1456
Merit: 1000
I do not understand when you say to set a value on the password,? I as a password on my 4x s5 I put X in all the miners, what I did wrong? Shocked

Take a look over here for example : https://www.nicehash.com/?p=faq#faqs4  That is their official site.  It will explain it better but in password it has:

p=price

And yes you need to put it in every miner.   If you just put in one just that one will be using it.
hero member
Activity: 798
Merit: 1000
I do not understand when you say to set a value on the password,? I as a password on my 4x s5 I put X in all the miners, what I did wrong? Shocked
legendary
Activity: 1456
Merit: 1000
lol, somebody is overpaying a bit; probably missed a zero  Smiley



Oh damn that is painful

I feel sorry for someone.  Wish it would have warned them "Wow your doing 10 x more do you mean to?"

Some one will have a bad night tonight.
full member
Activity: 140
Merit: 100
Get Free Mobile Data http://get.kickbit.com/1/oexq
lol, somebody is overpaying a bit; probably missed a zero  Smiley



Oh damn that is painful
hero member
Activity: 798
Merit: 1000
2015/04/29 16:04:56   2f8a3387077f267b14b233c9d16545a513584e2dde2aad46874629685f95747d   erning 0.00739526      fee 0.00015092

and this was the last payment that I received yesterday at 16:04



5 minute accepted speed GH/s   3235.7720
5 minute rejected speed GH/s   0.0000 (0.00%)
Rejected - shares above target GH/s   0.0000
Rejected - stale shares GH/s   0.0000
Rejected - duplicate shares GH/s   0.0000
Rejected - other GH/s   0.0000
Unpaid balance BTC   0.02616343


and this is what I gained from yesterday to today  0.02616343

4x antminer S5 Huh
legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
Dear nicehash/westhash admins/programmers.

If you disconnect miners that have been idle for 5 minutes you will get into a never ending fight with cgminer clients that only fail back to stable pools after 5 minutes leading to a persistent resonating failure. Can I suggest you increase your disconnect timer to longer, say 10 minutes, if you must have one.

We have this idle kick timeout to protect from botnet miners.

10 minutes seems too much, but we will put it to 6 minutes.
Hmm ... that reads as:
We have a kick that we didn't test properly that's been kicking miners off our pool ...
That 'seems' like a good idea.
Thanks for telling us we screwed up and didn't know what we were doing but we aren't going to take your advice coz we like kicking miners off our pool.
hero member
Activity: 588
Merit: 501
Dear nicehash/westhash admins/programmers.

If you disconnect miners that have been idle for 5 minutes you will get into a never ending fight with cgminer clients that only fail back to stable pools after 5 minutes leading to a persistent resonating failure. Can I suggest you increase your disconnect timer to longer, say 10 minutes, if you must have one.

We have this idle kick timeout to protect from botnet miners.

10 minutes seems too much, but we will put it to 6 minutes.
Pages:
Jump to: