Pages:
Author

Topic: [PPS multipool] NiceHash.com pool - higher profits than direct mining BTC! - page 12. (Read 98715 times)

hero member
Activity: 588
Merit: 501
nicehash the pool is going very badly, my miners 4x s5 disconnect, one miner crashes and I lose it, I always have to reboot, and is the third time that I find more than 59 000 errors


what happens? because I lose power?

Problems of miners are always only problems of miners and not the pool. Our pool only sends you data to process. If your miner uses buggy software, this can cause problems described above. As always, we suggest you to update mining software on your hardware and address your complaints and queries to manufacturer where you purchased your device.
hero member
Activity: 798
Merit: 1000
nicehash the pool is going very badly, my miners 4x s5 disconnect, one miner crashes and I lose it, I always have to reboot, and is the third time that I find more than 59 000 errors


what happens? because I lose power?
legendary
Activity: 4326
Merit: 8950
'The right to privacy matters'
It appears to be going back up I cannot understand whats happening.  Anyone know what coins are being mined or what's causing all the rentals? 

It was down to 2 percent I went to normal pools and now its up, I just dont get it.

a lot of action is on the lotto tickets see screen shot I have a 15TH ticket lasts 1 day the block is mine if I hit it.

but price is 0.0127 for the fixed number.  while true number is around 0.0106 so anyone playing the lotto acts as a price driver somewhat not totally. I think the pool limits how many lotto tickets not sure.  Here is my  ticket along with others.

legendary
Activity: 1456
Merit: 1000
It appears to be going back up I cannot understand whats happening.  Anyone know what coins are being mined or what's causing all the rentals? 

It was down to 2 percent I went to normal pools and now its up, I just dont get it.
hero member
Activity: 798
Merit: 1000
the firmware and the site nicehash, to smith, the only one I know, with cgminer 4.9, I found 59000 hardware errors, something like 3.5% in 12 hours, so I returned to the official firmware of bitmain, 2015/04 / 15, the power and set to 365.2
default and 350M
legendary
Activity: 1456
Merit: 1000
I also have a problem with the firmware of your site, the speed is lowered significantly, up to log off, and I found a mountain of errors, almost 3%

Which firmware?  And did you try turning PSU off then on?

I had been using C1 and S4 firmware's last couple of day's both were working very well.   I just now went back to official software now that pay is not the 30-40 percent stuff that was nice.

But that if mine ran slow it seemed a reboot of the psu fixed it.
hero member
Activity: 798
Merit: 1000
I also have a problem with the firmware of your site, the speed is lowered significantly, up to log off, and I found a mountain of errors, almost 3%
sr. member
Activity: 840
Merit: 251
The idle bug is still there with the firmware from the site for the S4 tested it today and the S4 dropped. Any help would greatly be appreciated. Thanks 
member
Activity: 64
Merit: 10
I'm using the S4 firmware on your site and set p=0.0115.  Now that the price has dropped below that value the S4 has stopped hashing, but the pool still shows as "alive" on the S4 page causing it not to switch to the backup pool.  I do not have this issue on the SP10 or SP20.  Any ideas?

This is a well known cgminer idlebug. Use our recommended software and this will not happen.

I'm using the S4 firmware on your page.  Is there another one I should be using?

https://www.westhash.com/index.jsp?p=software#asic
https://www.westhash.com/download/AntMiner-S4-SD-firmware_cgminer_4.9.0_nicehash_and_normal_fan.tar.gz
hero member
Activity: 588
Merit: 501
I'm using the S4 firmware on your site and set p=0.0115.  Now that the price has dropped below that value the S4 has stopped hashing, but the pool still shows as "alive" on the S4 page causing it not to switch to the backup pool.  I do not have this issue on the SP10 or SP20.  Any ideas?

This is a well known cgminer idlebug. Use our recommended software and this will not happen.
member
Activity: 64
Merit: 10
I'm using the S4 firmware on your site and set p=0.0115.  Now that the price has dropped below that value the S4 has stopped hashing, but the pool still shows as "alive" on the S4 page causing it not to switch to the backup pool.  I do not have this issue on the SP10 or SP20.  Any ideas?
hero member
Activity: 588
Merit: 501
Yes, the attackers have returned, we had to activate protection again.

We see that order placing works just fine now (according to logs).
legendary
Activity: 4326
Merit: 8950
'The right to privacy matters'
your site is not letting me place an order.  All I get is please wait after I enter the order.  So I guess you are under heavy ddos which is why cloud flare keep popping up.

I will order later in the day.
legendary
Activity: 885
Merit: 1006
NiceHash.com
My S5 hash shows all over the place up and down. I often wondered if this happens due to renters changing their price or canceling and the miner's hash is lost while switching pools?

As long as you have updated cgminer (preferably smith's one from our software download page) and you enable #xnsub your connection/mining should be stable. Indeed, if you don't use #xnsub your miner will get disconnected but immediately reconnected when buyer's orders are switching.
legendary
Activity: 1302
Merit: 1001
I'm trying to mine 6 S5's right now on this pool at %100. Are speeds in GH/s move up real slow? I see 4750, 5000, but not just 6000 yet and at a total I have 6.9TH/s pointed there. Been like that for over a week, so the payments are nice. But want to make sure getting all the juice there.



My S5 hash shows all over the place up and down. I often wondered if this happens due to renters changing their price or canceling and the miner's hash is lost while switching pools?
legendary
Activity: 1274
Merit: 1000
Personal text my ass....
I'm trying to mine 6 S5's right now on this pool at %100. Are speeds in GH/s move up real slow? I see 4750, 5000, but not just 6000 yet and at a total I have 6.9TH/s pointed there. Been like that for over a week, so the payments are nice. But want to make sure getting all the juice there.

hero member
Activity: 798
Merit: 1000
I went back to the original firmware, extranonce to me it did not work, I found 52740 errors and s5 was not active, then I do not know if it is normal that I see on nicehash hash values from 1200 gh / s, even down to 256 gh / s, 68 ghs, 620 gh / s
legendary
Activity: 4326
Merit: 8950
'The right to privacy matters'
Looks like it is slowly down right now.  Were around +15 percent on SHA so not the +40 we were enjoying.

I hope it goes back as it was very very nice to have.

third diff adjustment in a row with a solid sha-256 bump
legendary
Activity: 1456
Merit: 1000
Looks like it is slowly down right now.  Were around +15 percent on SHA so not the +40 we were enjoying.

I hope it goes back as it was very very nice to have.
member
Activity: 64
Merit: 10
Nicehash, thanks for providing upgraded firmware for my S4.  It is now up with extranonce subscription enabled.  Any chance you can post a pre-complied binary for my older SP10?

You might ask the SP team on updating firmware for it.

Again the past 24 hours have been pretty good pay.   Nice little bump in btc earned.

Makes sense, I'll shoot a message over to them. 

Agreed on the good pay.
Pages:
Jump to: