Topic: [PPS multipool] NiceHash.com pool - higher profits than direct mining BTC! - page 16. (Read 98715 times)
April 12, 2015, 04:49:18 AM
Wow somebody is renting hash for .0212?? mistake, nuts or another shit coin rush??
April 11, 2015, 05:59:41 PM
Somebody is renting 1PH and the price is high. I had my password set wrong...missed a zero had .115 just fixed it to .0115 and now its rented out on Westhash.
April 11, 2015, 03:49:37 PM
i dont understand how this pool works..
i am seeing this
#324068 Standard Alive 0.0120 1.50659467 4.63 1000.00 786 651.3364
and my P= is set to 0.0115.. it says there can be 1000 THS, but there is only 651ths being filled.. yet my miners are showing D on the pool..
shouldnt they be mining?
i am seeing this
#324068 Standard Alive 0.0120 1.50659467 4.63 1000.00 786 651.3364
and my P= is set to 0.0115.. it says there can be 1000 THS, but there is only 651ths being filled.. yet my miners are showing D on the pool..
shouldnt they be mining?
Check currently paying rate on first page. That is what miners are being paid. If you set your threshold above that, your miners will not mine.
We have eliminated payments per order 1 year ago already, because it was unfair - some miners were paid more and some less. Now (for 1 year already), all miners are paid equal price.
oh ok. so it averages out all the active orders?
that makes sense.
doesnt that kind of suck tho? if someone puts a .001 order for a ton of hash it will bring down the average?
edit, so my miners just connected.. its working, just kind of confusing. lol.
He most likely will never get hashpower due to too low price. We have a lot of buyers that make BTC or LTC arbitrage. These keep the prices still relatively high, even when there is no demand for special coins to mine.
April 11, 2015, 03:00:52 PM
i dont understand how this pool works..
i am seeing this
#324068 Standard Alive 0.0120 1.50659467 4.63 1000.00 786 651.3364
and my P= is set to 0.0115.. it says there can be 1000 THS, but there is only 651ths being filled.. yet my miners are showing D on the pool..
shouldnt they be mining?
i am seeing this
#324068 Standard Alive 0.0120 1.50659467 4.63 1000.00 786 651.3364
and my P= is set to 0.0115.. it says there can be 1000 THS, but there is only 651ths being filled.. yet my miners are showing D on the pool..
shouldnt they be mining?
Check currently paying rate on first page. That is what miners are being paid. If you set your threshold above that, your miners will not mine.
We have eliminated payments per order 1 year ago already, because it was unfair - some miners were paid more and some less. Now (for 1 year already), all miners are paid equal price.
oh ok. so it averages out all the active orders?
that makes sense.
doesnt that kind of suck tho? if someone puts a .001 order for a ton of hash it will bring down the average?
edit, so my miners just connected.. its working, just kind of confusing. lol.
April 11, 2015, 02:37:01 PM
i dont understand how this pool works..
i am seeing this
#324068 Standard Alive 0.0120 1.50659467 4.63 1000.00 786 651.3364
and my P= is set to 0.0115.. it says there can be 1000 THS, but there is only 651ths being filled.. yet my miners are showing D on the pool..
shouldnt they be mining?
i am seeing this
#324068 Standard Alive 0.0120 1.50659467 4.63 1000.00 786 651.3364
and my P= is set to 0.0115.. it says there can be 1000 THS, but there is only 651ths being filled.. yet my miners are showing D on the pool..
shouldnt they be mining?
Check currently paying rate on first page. That is what miners are being paid. If you set your threshold above that, your miners will not mine.
We have eliminated payments per order 1 year ago already, because it was unfair - some miners were paid more and some less. Now (for 1 year already), all miners are paid equal price.
April 11, 2015, 02:19:36 PM
i dont understand how this pool works..
i am seeing this
#324068 Standard Alive 0.0120 1.50659467 4.63 1000.00 786 651.3364
and my P= is set to 0.0115.. it says there can be 1000 THS, but there is only 651ths being filled.. yet my miners are showing D on the pool..
shouldnt they be mining?
i am seeing this
#324068 Standard Alive 0.0120 1.50659467 4.63 1000.00 786 651.3364
and my P= is set to 0.0115.. it says there can be 1000 THS, but there is only 651ths being filled.. yet my miners are showing D on the pool..
shouldnt they be mining?
That order is the last one getting filled by the available hash power. There are currently only 938.1501 TH/s available for orders on westhash. Since there are other orders above this order, this order gets whatever is left over.
#323881 Fixed Alive 0.0120 50.00 59 56.1730
#324449 Standard Alive 0.0124 10.00 10 0.0147
#323996 Standard Alive 0.0123 11.00 12 13.1375
#323995 Standard Alive 0.0123 11.00 9 10.4244
#323998 Standard Alive 0.0123 11.00 11 10.0810
#323997 Standard Alive 0.0122 11.00 17 10.6009
#324034 Standard Alive 0.0122 8.00 11 9.9687
#324430 Standard Alive 0.0121 500.00 576 430.9073
#324068 Standard Alive 0.0120 1000.00 518 398.3623
Add up the last column and it will come to about 938 TH/s.
April 11, 2015, 02:07:32 PM
i dont understand how this pool works..
i am seeing this
#324068 Standard Alive 0.0120 1.50659467 4.63 1000.00 786 651.3364
and my P= is set to 0.0115.. it says there can be 1000 THS, but there is only 651ths being filled.. yet my miners are showing D on the pool..
shouldnt they be mining?
no maybe yesi am seeing this
#324068 Standard Alive 0.0120 1.50659467 4.63 1000.00 786 651.3364
and my P= is set to 0.0115.. it says there can be 1000 THS, but there is only 651ths being filled.. yet my miners are showing D on the pool..
shouldnt they be mining?
All three may be true depends on a lot more then the info you gave us.
all of these are active right now
they are all lower then your p of 0.0115 so the correct answer is you may not get the rental as all of them are ahead of your bid.
April 11, 2015, 02:05:32 PM
i dont understand how this pool works..
i am seeing this
#324068 Standard Alive 0.0120 1.50659467 4.63 1000.00 786 651.3364
and my P= is set to 0.0115.. it says there can be 1000 THS, but there is only 651ths being filled.. yet my miners are showing D on the pool..
shouldnt they be mining?
i am seeing this
#324068 Standard Alive 0.0120 1.50659467 4.63 1000.00 786 651.3364
and my P= is set to 0.0115.. it says there can be 1000 THS, but there is only 651ths being filled.. yet my miners are showing D on the pool..
shouldnt they be mining?
April 10, 2015, 04:46:00 AM
From my experience, and what I've heard from others, you have to be careful with extranonce with Bitmain hardware. They tend to not fail back to the alt pools when the price changes.
M
M
My S3's would not failover sometimes but the S5's seem to failover just fine. (its very frustrating to find your miner just sitting idol)
April 09, 2015, 10:44:47 PM
My hash rate is being reported very low on this pool. Is that normal?
Have you tried setting the difficulty manually?
yes i tried this setup
p=0.0115;d=1024
try p =0.0102
your p is far too high.
it was just mining.. i want to mostly be on the ck solo pool.
April 09, 2015, 10:39:24 PM
My hash rate is being reported very low on this pool. Is that normal?
Have you tried setting the difficulty manually?
yes i tried this setup
p=0.0115;d=1024
try p =0.0102
your p is far too high.
April 09, 2015, 08:45:52 PM
My hash rate is being reported very low on this pool. Is that normal?
Have you tried setting the difficulty manually?
yes i tried this setup
p=0.0115;d=1024
April 06, 2015, 05:44:51 AM
My hash rate is being reported very low on this pool. Is that normal?
Have you tried setting the difficulty manually?
April 05, 2015, 07:06:00 PM
My hash rate is being reported very low on this pool. Is that normal?
April 05, 2015, 03:46:08 PM
i guess i wont worry about it then..
April 05, 2015, 03:31:53 PM
From my experience, and what I've heard from others, you have to be careful with extranonce with Bitmain hardware. They tend to not fail back to the alt pools when the price changes.
M
M
April 05, 2015, 03:22:03 PM
nope its not working.. the pool shows alive now, but still a red X on the worker.. oh well.
S3 has to be manually updated for xnsub support: download it here and see README: https://www.nicehash.com/index.jsp?p=software#asic
And it is
stratum+tcp://stratum.nicehash.com:PORT_NUM#xnsub
for cgminer (no / slash after port num)
and
stratum+tcp://stratum.nicehash.com:PORT_NUM/#xnsub
for bfgminer (yes, / slash after port num)
April 05, 2015, 03:17:21 PM
if i put #xnsub on my s3s the pool shows up as down.. do they not support it?
Are you putting /#xnsub before the port number? I did that too. It goes after.
i.e: http://www.nicehash.com:port/#xnsub
Also, unless you have a modified version of CGMiner flashed to the S3 it won't work anyway.
no i just have the regular firmware from bitmain..
my s5 works tho and has a check.. and yeah i am putting it after the port.. like this
stratum+tcp://stratum.westhash.com:3334#xnsub
so it looks like to get the s3s to work i need to make my own proxy? or just leave it?
pretty sure you need a slash between the port number and the # symbol. Other than that no idea why it wouldn't connect. Mine connected without issues.
nope its not working.. the pool shows alive now, but still a red X on the worker.. oh well.
April 05, 2015, 03:08:08 PM
if i put #xnsub on my s3s the pool shows up as down.. do they not support it?
Are you putting /#xnsub before the port number? I did that too. It goes after.
i.e: http://www.nicehash.com:port/#xnsub
Also, unless you have a modified version of CGMiner flashed to the S3 it won't work anyway.
no i just have the regular firmware from bitmain..
my s5 works tho and has a check.. and yeah i am putting it after the port.. like this
stratum+tcp://stratum.westhash.com:3334#xnsub
so it looks like to get the s3s to work i need to make my own proxy? or just leave it?
pretty sure you need a slash between the port number and the # symbol. Other than that no idea why it wouldn't connect. Mine connected without issues.
thanks, all the documentation i saw doesnt have the slash but i put it in and it seems to be working..
the s5 doesnt need it tho.. its working how i pasted.
strange.
April 05, 2015, 02:55:45 PM
if i put #xnsub on my s3s the pool shows up as down.. do they not support it?
Are you putting /#xnsub before the port number? I did that too. It goes after.
i.e: http://www.nicehash.com:port/#xnsub
Also, unless you have a modified version of CGMiner flashed to the S3 it won't work anyway.
no i just have the regular firmware from bitmain..
my s5 works tho and has a check.. and yeah i am putting it after the port.. like this
stratum+tcp://stratum.westhash.com:3334#xnsub
so it looks like to get the s3s to work i need to make my own proxy? or just leave it?
pretty sure you need a slash between the port number and the # symbol. Other than that no idea why it wouldn't connect. Mine connected without issues.
Jump to: