Pages:
Author

Topic: [pre-ICO ended] 3DES - The First Decentralized 3D Printing Slicer - page 26. (Read 21166 times)

full member
Activity: 350
Merit: 100
Options to add
Address: 0x1a9b18cB4891046a1211Eb61C6F3f2694b26f427
Decimal: 18
Name: DES
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
Our pre-ICO will start in 2 hours!!
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
Gas limit = 320.000

List of links with useful info about the project and presale:
http://telegra.ph/3DES-list-of-links-09-24
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
Hello!  This is Alena from 3DES team! 
I'm writing to remind you that our pre-ICO starts in 12 hours.
In this regard I'd like to share the following!
1. We added a video on the site where I'm telling the project details:
http://3des.network/#video
2. We added an instruction how to participate in tomorrow's pre-sale:
http://telegra.ph/Instruction-how-to-participate-in-3DES-pre-ICO-09-24
3. If you have further questions,  we prepared an FAQ:
http://telegra.ph/3DES-FAQ-09-24
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
Important information!
Everybody who interested in our project - subscribe our newsletter (form on our site).
We will give updated info at 14:00 UTC for our subscribers.
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
Whether there is a twitter bounty? Would like more generosity of the company))
We have no twitter bounty. Its very easy to cheat followers.

Interesting idea

How big is the problem you are solving with this? Im not familiar with 3d printing
The newest commercial studios really have the problem. We have opened several. We bought printers and laptops (not so powerful).
We have many orders for precise big models printing. It slices ~15 mins every model, sometimes we need to reslice it (+15min +15min ...). Its boring to wait until it slices. And the PC is glitches in this time.
legendary
Activity: 2464
Merit: 1145
Interesting idea

How big is the problem you are solving with this? Im not familiar with 3d printing
full member
Activity: 350
Merit: 102
Bounty Manager
Whether there is a twitter bounty? Would like more generosity of the company))
newbie
Activity: 40
Merit: 0
I've read Whitepaper till the end + review articles.
If this project implements the product, then I won't be surprised at the capitalization 100M or more.
newbie
Activity: 40
Merit: 0
I'm going to say this again, hopefully people will listen.

There is NO NEED for a decentralized slicer. This is like having a decentralized image converter. Do you think there needs to be an ICO to build a product that converts BMP into JPG? If not then don't fall for this BS.
I've been 3D printing for 6 years. Even the most complex STL files will take no longer than a few minutes on the slowest machine to slice and there are cloud slicing websites that already exist. There is also Octoprint which most of the community uses and they have cloud slicing in their service, it's seamless.

This project is pointless, please don't waste your money.
Have you used 3D printing without computer (with phone) or sliced many models at one time? Centralized servises aren't decision of the problem. They are not cheap and secure for users. Why we need bitcoin if we can use Visa/Mastercard or why we need torrents if we can use online cimemas?
So, I believe we need similar desicion for 3D pr industry too.
Yes. I'm agree with your opinion.
full member
Activity: 300
Merit: 100
“Blockchain Just Entered The Real World”
I'm going to say this again, hopefully people will listen.

There is NO NEED for a decentralized slicer. This is like having a decentralized image converter. Do you think there needs to be an ICO to build a product that converts BMP into JPG? If not then don't fall for this BS.
I've been 3D printing for 6 years. Even the most complex STL files will take no longer than a few minutes on the slowest machine to slice and there are cloud slicing websites that already exist. There is also Octoprint which most of the community uses and they have cloud slicing in their service, it's seamless.

This project is pointless, please don't waste your money.
Have you used 3D printing without computer (with phone) or sliced many models at one time? Centralized servises aren't decision of the problem. They are not cheap and secure for users. Why we need bitcoin if we can use Visa/Mastercard or why we need torrents if we can use online cimemas?
So, I believe we need similar desicion for 3D pr industry too.
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
I'm going to say this again, hopefully people will listen.

There is NO NEED for a decentralized slicer. This is like having a decentralized image converter. Do you think there needs to be an ICO to build a product that converts BMP into JPG? If not then don't fall for this BS.
I've been 3D printing for 6 years. Even the most complex STL files will take no longer than a few minutes on the slowest machine to slice and there are cloud slicing websites that already exist. There is also Octoprint which most of the community uses and they have cloud slicing in their service, it's seamless.

This project is pointless, please don't waste your money.
We're preparing the software mostly for newest studios and schools that have no enough money to buy the expensive computing environment. Also we have some centralized competitors: Printr and Astroprint. This indicates that the service is in demand.
Besides 3DES developments is an universal distributed computing service (p2p) and 3DES is just a case. To add a new module (render, slicing, etc) we just need to update our software with the "greed" evaluation modules (you can see it in our whitepaper).
Our team is open and real, we're working on a project everyday!
full member
Activity: 313
Merit: 100
I'm going to say this again, hopefully people will listen.

There is NO NEED for a decentralized slicer. This is like having a decentralized image converter. Do you think there needs to be an ICO to build a product that converts BMP into JPG? If not then don't fall for this BS.
I've been 3D printing for 6 years. Even the most complex STL files will take no longer than a few minutes on the slowest machine to slice and there are cloud slicing websites that already exist. There is also Octoprint which most of the community uses and they have cloud slicing in their service, it's seamless.

This project is pointless, please don't waste your money.
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
Article with review of 3D printing markets and benefits of our product:
ICO: the first blockchain solution for 3D printing industry
3DES: Blockchain For the Sake of 3D Printing, Not the Blockchain Itself

We are open for you. If you have any questions - we are ready to answer.
You may ask here or in telegram
Or write to our e-mail: [email protected]
Thanks!
newbie
Activity: 109
Merit: 0
May you send me links to the last reviews?
newbie
Activity: 118
Merit: 0
Nice project. I've read whitepaper and your review on cointelegraph. I see great future of 3D tech.
I'm not very active in crypto community, so it my first bounty.
I wish you reach fundraise hardcap!
newbie
Activity: 42
Merit: 0
We will keep this community informed over the next weeks.
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
Why a decentralized slicer is needed?
The newest 3D printing studios need an environment to process the models. We're making this process cheaper!
why decentralized? What benefit from decentralizing you wish to make?
The main reason of decentralization is to make a distributed self-evolving network where people can make the service for companies or people.
newbie
Activity: 5
Merit: 0
Why a decentralized slicer is needed?
The newest 3D printing studios need an environment to process the models. We're making this process cheaper!
why decentralized? What benefit from decentralizing you wish to make?
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
Why a decentralized slicer is needed?
The newest 3D printing studios need an environment to process the models. We're making this process cheaper!
Pages:
Jump to: