Pages:
Author

Topic: [pre-ICO ended] 3DES - The First Decentralized 3D Printing Slicer - page 30. (Read 21166 times)

newbie
Activity: 47
Merit: 0
is this real technology, not scam?
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
Hi!
support, the idea is good, will pay attention to your post and further information. When you will update info?
We will update the information on September 6-7, but local updates may be before this date.

Great project, interesting market of 3D printing. By the after start of the PRE-ICO plan to invest 17 ether. How many tokens will I recieve??
Info from start post (it's countable)

Private ICO: 1 Ether = 4.000 DES
Pre-ICO:      1 Ether = 2.500 DES
ICO:            1 Ether = 1.000 DES

So, you will get 42.500 DES

newbie
Activity: 11
Merit: 0
Great project, interesting market of 3D printing. By the after start of the PRE-ICO plan to invest 17 ether. How many tokens will I recieve??
newbie
Activity: 9
Merit: 0
support, the idea is good, will pay attention to your post and further information. When you will update info?
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
Really nice, taking the opportunity in the 3D printing section is a good choice.
Today's 3D printing getting more and more affordable, and by taking this chance it will be a good starting point to take the lead from anyone who were thinking to make the same project as this one.

Yes, Sir. You're right.
All the devs belives in success.
sr. member
Activity: 770
Merit: 250
Really nice, taking the opportunity in the 3D printing section is a good choice.
Today's 3D printing getting more and more affordable, and by taking this chance it will be a good starting point to take the lead from anyone who were thinking to make the same project as this one.
newbie
Activity: 40
Merit: 0

So many people asked the similar question: why our the main ICO stage will be in February?


We will ask our potential investors what will be preffered.

any updates?
We will update info in our ANN topic.
At the moment we are working hardly with the site.

 Grin "Your call is very important to us, please hold on line"
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible

So many people asked the similar question: why our the main ICO stage will be in February?


We will ask our potential investors what will be preffered.

any updates?
We will update info in our ANN topic.
At the moment we're hard-working on the site.
newbie
Activity: 40
Merit: 0

So many people asked the similar question: why our the main ICO stage will be in February?


We will ask our potential investors what will be preffered.

any updates?
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
I 3D print. ALOT. I slice on on my gaming rig. Even the most complex item takes no more than 10 seconds. If I was slicing on my Raspberry Pi, yes it would be slow.

I just don't get the need for this product. It's not like I'm doing something cpu intensive, like video editing or compression. It's slicing.

Slicing is device dependent. Settings you use in gcode for one printer, usually won't work on another. So sharing isn't even a thing that this is good for.

Please educate me on how this can benefit me??


You can't just take 2 high tech things and mash them together and expect a golden egg. Sometimes its a big 'ol Turd.
Yes, you're slicing on your powerful gaming rig. It's too expensive to construct a powerful PC. The project is oriented on increasing the market by improving the slicing proccess on the much less powerful hardware environment. The picture describes it better


I think my question was not answered directly to my point and im going to ask about its uses i know its a 3d or using a 3d machine to create however what is the more specific details that 3d project will not end just in its 3d customizations or printing slicer ?..
Yes, we're planning to make another project 3DEX, the P2P 3D prints marketplace based on district0x technology. It will allow you to find the working 3D printer is near you and order the service at the best price. The DES tokens will circulate in the system as an apptoken too.
full member
Activity: 497
Merit: 110
arcs-chain.com
I think my question was not answered directly to my point and im going to ask about its uses i know its a 3d or using a 3d machine to create however what is the more specific details that 3d project will not end just in its 3d customizations or printing slicer ?..
full member
Activity: 313
Merit: 100
I 3D print. ALOT. I slice on on my gaming rig. Even the most complex item takes no more than 10 seconds. If I was slicing on my Raspberry Pi, yes it would be slow.

I just don't get the need for this product. It's not like I'm doing something cpu intensive, like video editing or compression. It's slicing.

Slicing is device dependent. Settings you use in gcode for one printer, usually won't work on another. So sharing isn't even a thing that this is good for.

Please educate me on how this can benefit me??


You can't just take 2 high tech things and mash them together and expect a golden egg. Sometimes its a big 'ol Turd.
sr. member
Activity: 320
Merit: 250
Spanish Translator
Nice project, I would like participate on bounty campaign and reserve the Spanish translation. Goodluck dev  Wink
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
When will you publish ANN thread?
During 1 week.
interesting idea!
have this project got any competitors? somebody make something like you plan?
We've found information about two projects that trying to integrate 3D printing with blockchain:
- Ubims
- Genesis of Things
These projects focuses on creating 3D printing marketplaces. There is no any information about ICO and info about phase of development.
I don't thing that we are competitors. Anyway 3D printing is technology with great potential and it's able to decenralize manufacturing in close future.
Thanks for info and I have another question: have you any any market reviews?
The answer to your question is in #50 post. We'll publish this info in our review articles.
newbie
Activity: 113
Merit: 0
When will you publish ANN thread?
During 1 week.
interesting idea!
have this project got any competitors? somebody make something like you plan?
We've found information about two projects that trying to integrate 3D printing with blockchain:
- Ubims
- Genesis of Things
These projects focuses on creating 3D printing marketplaces. There is no any information about ICO and info about phase of development.
I don't thing that we are competitors. Anyway 3D printing is technology with great potential and it's able to decenralize manufacturing in close future.
Thanks for info and I have another question: have you any any market reviews?
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
why you have no website? or i can't find in first post?
We are doing it now. It's PRE ANN thread. It'll be published with updated info about the project.
newbie
Activity: 40
Merit: 0
why you have no website? or i can't find in first post?
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
Quote from: Keyless
if you have bounty translate i may take japanese
Hi. We've made Jananese translation and we plan to publish it with ANN thread. But you may take thread management. PM me if you interested.

damn
thread management is too hard for me, i'm a beginner and have a little experience on forums  Undecided
Sorry. But we appreciate the translation with thread management. It's more important than translation only. We may do some translations using resources of our team, but thread management is a key condition in such cases. Thanks!

Quote from: Keyless
did you planing twitter bounty ?
Only if you have a real subscribers interested in blockchain technologies. We may count conversion statistics to check it) Our bounties are gererous, but not massive. We can give you a link with UTM and count the conversion and pay you the bounty for the target action on our landing page. But the website will be during a week (6 days already).
full member
Activity: 158
Merit: 100
3DES - Slicing as fast as possible
Okay, we have got some investments. Thank you guys. All the eth will be spent on advertising our pre-ICO.

We want to remind you that the private-ICO stage with max discount will be until 25 September.
6-7 September we will make accessible our website with the simple description of our project and investment proposal.
Also after that we will launch Google Ad and publish articles on profile magazines and forums (no paid).

Anyone still can ask me in PM for the address for investment.



Also you can join our Telegram community and ask our manager any question you interested.

Alena Anokhova
CEO, 3DES
newbie
Activity: 109
Merit: 0
I use 3D printers and I think it will be profitable. Good luck, guys!
Pages:
Jump to: