We are now completely caught up to all orders, and even the order that was paid for this morning has been shipped.
Unfortunately between a large customer and what we're reserving for hosting customers, there's only 30 boards left of the current batch and it'll be a few weeks before we have more PCBs for another round. So get 'em while the gettin's good.
Additionally, we'll be rocking the D750 boards soon so we'll be able to ship orders by the end of the week.
Topic: [PRICE REDUCED] DPS-2000BB 2000W Server PSU Interface Board - page 8. (Read 62074 times)
I'll admit we did look into that a bit, but honestly there's enough folks already set up to do that we didn't know if we could be comptetetive anytime soon. If Novak builds his lightweight embedded Linux controller though, we might have a start to something. And if ASICMiner makes good on the BE300 having the same pinout as the BE200 that might be worth playing with. But we have a lot of infrastructure to take care of first.
true, bigger game, especially relying on others chips , that can kill everything like the avalon debacle.
I'll admit we did look into that a bit, but honestly there's enough folks already set up to do that we didn't know if we could be comptetetive anytime soon. If Novak builds his lightweight embedded Linux controller though, we might have a start to something. And if ASICMiner makes good on the BE300 having the same pinout as the BE200 that might be worth playing with. But we have a lot of infrastructure to take care of first.
Thanks for reply and email also. 
now Only if you manufactured miners also. ..
now Only if you manufactured miners also. ..
Every board that has been paid for to date (including yours), which have not yet shipped, will be shipped this afternoon and tracking numbers will be distributed.
Anything on the boards shipping today and how long are we looking at?
Looking good!
Just Need to get a Hand on one of the boards
@sidehack: did you get my PM ??
Just Need to get a Hand on one of the boards
@sidehack: did you get my PM ??
excuse the crappy pics...it was super late when I took these plus the print quality was crap...doing printer maint. today 
The lid is NOT finished but wanted to give you guys a peek.
The lid is NOT finished but wanted to give you guys a peek.
Not sure I'd recommend that, as the static bag is static-dissipative because it's electrically conductive. Probably a high enough resistance to not cause problems, but the potential is there.
Little rubber feet might be a good thing to look into stocking. Probably gonna get one of those cases too, when they're ready, at least to play with.
Little rubber feet might be a good thing to look into stocking. Probably gonna get one of those cases too, when they're ready, at least to play with.
+1 on the feet, and the cases as well.
Feet will be incorporated into the design even if I must bust out the Ninjaflex filament and print the feet separate and glue them in place
Printing the 6th prototype now...should be the final version before adding feet and provisions for the lid and raising the sides a bit more.
Not sure I'd recommend that, as the static bag is static-dissipative because it's electrically conductive. Probably a high enough resistance to not cause problems, but the potential is there.
Little rubber feet might be a good thing to look into stocking. Probably gonna get one of those cases too, when they're ready, at least to play with.
Little rubber feet might be a good thing to look into stocking. Probably gonna get one of those cases too, when they're ready, at least to play with.
+1 on the feet, and the cases as well.
Not sure I'd recommend that, as the static bag is static-dissipative because it's electrically conductive. Probably a high enough resistance to not cause problems, but the potential is there.
Little rubber feet might be a good thing to look into stocking. Probably gonna get one of those cases too, when they're ready, at least to play with.
Little rubber feet might be a good thing to look into stocking. Probably gonna get one of those cases too, when they're ready, at least to play with.
I'm interested in bottom cases for these boards. Especially if they make the board sit level with the miner. I'm looking for little rubber feet right now to make them sit level and not contact the metal they are sitting on.
For ours, I just put the static bag it came in underneath the board on top of the miners. This way it won't contact the metal directly, and it seems to be doing it's job for now. Those cases look interesting, I might need to try them out.I just ordered and paid for a PSU from Minersource.net just now so I can model the PSU "rack" design requested.
Afterwards, I will need to sell the PSU...lemme know if anyone is interested. Thanks!
(still in prototype status...sides will be taller, adding the 2x board screw locations, also will have a lid with switch and dial access)
Afterwards, I will need to sell the PSU...lemme know if anyone is interested. Thanks!
(still in prototype status...sides will be taller, adding the 2x board screw locations, also will have a lid with switch and dial access)
I'm interested in bottom cases for these boards. Especially if they make the board sit level with the miner. I'm looking for little rubber feet right now to make them sit level and not contact the metal they are sitting on.
Do you mean "pjcltd" ?? If so, I sent him a msg and ask. No respond yet.
Do you sell a set with board and cable now ?? In stock ?
thanks
Do you sell a set with board and cable now ?? In stock ?
thanks
I had a guy asking about EU reselling, but I never heard back from him after the initial email.
Is there a reseller for this board in Europe ??
All our cables are 16AWG, and always have been. The spades we changed up a few thousand cables ago, to a product that we found to be both better and cheaper (if you believe such a thing is possible), but the wires have always been the same.
As for boards, we're about to start manufacturing the second half of our standing PCB stock but someone's already spoken for about half the batch. We'll have 40 to 50 boards left of the batch, and as soon as we can we'll be ordering more PCBs (which hopefully won't arrive nine @!#$ing days late this time) but it'd still likely be around four weeks before we'll be shipping again so better place an order soon. The move has really thrown a wrench into administration or we'd probably have the boards on order already.
As for boards, we're about to start manufacturing the second half of our standing PCB stock but someone's already spoken for about half the batch. We'll have 40 to 50 boards left of the batch, and as soon as we can we'll be ordering more PCBs (which hopefully won't arrive nine @!#$ing days late this time) but it'd still likely be around four weeks before we'll be shipping again so better place an order soon. The move has really thrown a wrench into administration or we'd probably have the boards on order already.
Count me in for 7 please.
I just ordered and paid for a PSU from Minersource.net just now so I can model the PSU "rack" design requested.
Afterwards, I will need to sell the PSU...lemme know if anyone is interested. Thanks!
(still in prototype status...sides will be taller, adding the 2x board screw locations, also will have a lid with switch and dial access)
Afterwards, I will need to sell the PSU...lemme know if anyone is interested. Thanks!
(still in prototype status...sides will be taller, adding the 2x board screw locations, also will have a lid with switch and dial access)
All our cables are 16AWG, and always have been. The spades we changed up a few thousand cables ago, to a product that we found to be both better and cheaper (if you believe such a thing is possible), but the wires have always been the same.
As for boards, we're about to start manufacturing the second half of our standing PCB stock but someone's already spoken for about half the batch. We'll have 40 to 50 boards left of the batch, and as soon as we can we'll be ordering more PCBs (which hopefully won't arrive nine @!#$ing days late this time) but it'd still likely be around four weeks before we'll be shipping again so better place an order soon. The move has really thrown a wrench into administration or we'd probably have the boards on order already.
As for boards, we're about to start manufacturing the second half of our standing PCB stock but someone's already spoken for about half the batch. We'll have 40 to 50 boards left of the batch, and as soon as we can we'll be ordering more PCBs (which hopefully won't arrive nine @!#$ing days late this time) but it'd still likely be around four weeks before we'll be shipping again so better place an order soon. The move has really thrown a wrench into administration or we'd probably have the boards on order already.
I bet coin was quite a bit lower then, wasn't it? I still have my first AM Blade and my first two Cubes, none of which are stock.
Yeah let me know in a few weeks we can plan a guided tour of the shop. Won't be that hard, it's a shop so there's like two rooms.
Yeah let me know in a few weeks we can plan a guided tour of the shop. Won't be that hard, it's a shop so there's like two rooms.
Yes, I got my asic miners late oct. early nov. I just knew they would be paper weights by feb. Alas, they still churning. And making money! LOL $15.00 a month! I will soon move them to another loco, and point to alts as I need the 360 watts here now.
I am in full conversion mode of all my gpus to 240 PSU's. Get ready, I need more boards.
Real quick though.. correct me if I am wrong, but the dell psu cables are the same gauge, and I can simply move them over? I bought extras from you like 3 months ago? They look close.. but a hair smaller. Will they work?
Jump to: