http://69.12.86.115/
Topic: PSA: Add a Full Node for just $19/year! - page 10. (Read 17776 times)
Ok finally i have setup my first bitcoin node. Thx for the nice guide guys. Here is my adress
http://69.12.86.115/
http://69.12.86.115/
Does anyone know if this pricing is locked in year over year? If so I'm going to have to set up a ton of these!
Cheers,
Adam
Cheers,
Adam
Ok last question is what i have to edit here
in the ip adress. do i have to type my server adress and port that is 8333?
And what i have to type in that line
and there do i have to type the same?
Quote
access = AuthServiceProxy("http://RPCUSER:PRCPASSWORD@127.0.0.1:8332")
in the ip adress. do i have to type my server adress and port that is 8333?
And what i have to type in that line
Quote
ff.write("Bitcoin Node: 192.227.137.5:8333
")
Bitcoin Node: 192.227.137.5:8333
")and there do i have to type the same?
those are what you change.
Ok last question is what i have to edit here
in the ip adress. do i have to type my server adress and port that is 8333?
And what i have to type in that line
and there do i have to type the same?
Quote
access = AuthServiceProxy("http://RPCUSER:[email protected]:8332")
in the ip adress. do i have to type my server adress and port that is 8333?
And what i have to type in that line
Quote
ff.write("Bitcoin Node: 192.227.137.5:8333
")
Bitcoin Node: 192.227.137.5:8333
")and there do i have to type the same?
Ok i have fix the problem
I run a
sudo update-locale LANG=en_US.UTF-8 LANGUAGE=en_US:en LC_ALL=en_US.UTF-8
after reboot and then a reconfigure of locales and now with the command bitcoind getinfo i see my first full bitcoin node that running
I run a
sudo update-locale LANG=en_US.UTF-8 LANGUAGE=en_US:en LC_ALL=en_US.UTF-8
after reboot and then a reconfigure of locales and now with the command bitcoind getinfo i see my first full bitcoin node that running
I set my timezone to greece. I dont know if that have do a mess. When i setup to reconfigure locale i have that
Quote
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "el_GR.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
Generating locales...
en_US.ISO-8859-1... done
en_US.UTF-8... done
it_IT.ISO-8859-1... up-to-date
it_IT.UTF-8... up-to-date
Generation complete.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "el_GR.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
Generating locales...
en_US.ISO-8859-1... done
en_US.UTF-8... done
it_IT.ISO-8859-1... up-to-date
it_IT.UTF-8... up-to-date
Generation complete.
i'm not sure i understand the problem.
you're able to connect using vnstat and your node is being seen on bitnodes.
the rpc gui isn't working yet but that can take some time. but make sure you enter the rpcuser and rpcpassword into the *.py file from the *.conf file Morblias reference above.
I set my timezone to greece. I dont know if that have do a mess. When i setup to reconfigure locale i have that
Quote
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "el_GR.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
Generating locales...
en_US.ISO-8859-1... done
en_US.UTF-8... done
it_IT.ISO-8859-1... up-to-date
it_IT.UTF-8... up-to-date
Generation complete.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "el_GR.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
Generating locales...
en_US.ISO-8859-1... done
en_US.UTF-8... done
it_IT.ISO-8859-1... up-to-date
it_IT.UTF-8... up-to-date
Generation complete.
What it means if i see this message with bitcoind getinfo?
Quote
terminate called after throwing an instance of 'std::runtime_error'
what(): locale::facet::_S_create_c_locale name not valid
Aborted
what(): locale::facet::_S_create_c_locale name not valid
Aborted
i've seen that a coupla times. do this:
Code:
sudo locale-gen en_US en_US.UTF-8
sudo locale-gen it_IT it_IT.UTF-8
sudo locale-gen xx_xx xx_XX.UTF-8 ...
sudo dpkg-reconfigure locales
sudo locale-gen it_IT it_IT.UTF-8
sudo locale-gen xx_xx xx_XX.UTF-8 ...
sudo dpkg-reconfigure locales
What it means if i see this message with bitcoind getinfo?
Quote
terminate called after throwing an instance of 'std::runtime_error'
what(): locale::facet::_S_create_c_locale name not valid
Aborted
what(): locale::facet::_S_create_c_locale name not valid
Aborted
You can check your RPCUSER/PASS at
You need those to match what is in the btc-update.py script.
Code:
vim ~/.bitcoin/bitcoin.conf
You need those to match what is in the btc-update.py script.
you should add that to your tute. i don't remember it being in there.
You can check your RPCUSER/PASS at
You need those to match what is in the btc-update.py script.
Also, while ssh'ed into it, you can type this to view what bitcoind is doing (current connected peers, block height, etc)
I am not sure if that https://getaddr.bitnodes.io/ address is showing correct or not, but if so, you need to upgrade bitcoind. That shows you are on 0.8.1, the current version is 0.9.1
Code:
vim ~/.bitcoin/bitcoin.conf
You need those to match what is in the btc-update.py script.
Also, while ssh'ed into it, you can type this to view what bitcoind is doing (current connected peers, block height, etc)
Code:
bitcoind getinfo
I am not sure if that https://getaddr.bitnodes.io/ address is showing correct or not, but if so, you need to upgrade bitcoind. That shows you are on 0.8.1, the current version is 0.9.1
I have try to setup and my cloud server but i dont know that is working. I have done everything in the guide but i dont think i have setup my server. In vnstat i dont see any bitcoin traffic
http://69.12.86.115/vnstat/
how can i see that bitcoin node is runing? And what i have to set in RPCUSER, RPCPASSWORD, IP Address to /usr/local/bin/btc-update.py? My server password and adress or something else? Thx for any advice
edit: ok i see trafic now in vnstat i have change the eth0 with venet0 but i cant see bitcoin node interface. I have look with top and bitcoind is runnign and here when i write my adress
https://getaddr.bitnodes.io/
i see a green quote with 69.12.86.115:8333 /Satoshi:0.8.1/ but i dont know what that means
http://69.12.86.115/vnstat/
how can i see that bitcoin node is runing? And what i have to set in RPCUSER, RPCPASSWORD, IP Address to /usr/local/bin/btc-update.py? My server password and adress or something else? Thx for any advice
edit: ok i see trafic now in vnstat i have change the eth0 with venet0 but i cant see bitcoin node interface. I have look with top and bitcoind is runnign and here when i write my adress
https://getaddr.bitnodes.io/
i see a green quote with 69.12.86.115:8333 /Satoshi:0.8.1/ but i dont know what that means
created 2 nodes in US using WLS deal. Glad to donate for Bitcoin network.
Yeah you need the entire blockchain. At the moment I believe it is around 20GB. The VPS I get have 30+ GB on them. I also look for ones with at least 1GB RAM with vSwap.
Damn, it was like 2 GB last time I bothered to look.
when you think about it, $19/yr is an amazing price.
got it running 
thanks Morblias for excellent instructions.
edit: who is Eric Meyer?
thanks Morblias for excellent instructions.
edit: who is Eric Meyer?
What is the hardware requirements for running a full node?
Don't you need to download the whole blockchain if you run a full node? Then my box is out of the question since it's just 5GB HDD.
Don't you need to download the whole blockchain if you run a full node? Then my box is out of the question since it's just 5GB HDD.
Yeah you need the entire blockchain. At the moment I believe it is around 20GB. The VPS I get have 30+ GB on them. I also look for ones with at least 1GB RAM with vSwap.
What is the hardware requirements for running a full node?
Don't you need to download the whole blockchain if you run a full node? Then my box is out of the question since it's just 5GB HDD.
Don't you need to download the whole blockchain if you run a full node? Then my box is out of the question since it's just 5GB HDD.
I modified my documents so it is more user friendly. I only install bitcoind, bitcoinrpc, apache2, and vnstat (vnstat really isn't necessary, but I like it to monitor bandwidth)
Steps to create a node on a VPS using ubuntu: http://pastebin.com/MGu1iBkH
Here is the workload on one of my nodes:
Steps to create a node on a VPS using ubuntu: http://pastebin.com/MGu1iBkH
Here is the workload on one of my nodes:
That looks great, I would expect it to use a lot more CPU.
Thanks for helping people set these up.
Jump to: