PSU wire will not hot ? | Bitcointalksearch.org

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: mattjack on April 08, 2015, 06:49:59 AM

wiring components and testing in PSU it's hot but additionally it's not necessary but normally the PSU have to connect with the main Line powered mother board and plug the components.

Are you saying normally the motherboard cable is plugged in?

If so that was true long ago with GPU rig's. But today a lot of the asics do not have a motherboard plug. You will have to use something to turn them on wether it be a switch or paperclip.

mattjack

full member

Activity: 120

Merit: 100

Matt or Jack? Why not both!

wiring components and testing in PSU it's hot but additionally it's not necessary but normally the PSU have to connect with the main Line powered mother board and plug the components.

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: ToQcHista on April 08, 2015, 02:16:44 AM

Quote from: notlist3d on April 08, 2015, 01:29:59 AM

Quote from: ToQcHista on April 08, 2015, 01:16:39 AM

Quote from: notlist3d on April 07, 2015, 03:18:26 PM

Quote from: ?? on ??

Quote from: ToQcHista on April 07, 2015, 10:05:09 AM

thanks.

undertood.

but.

this very small amount of electricity bad is ?

No

It is fine and not an issue.

I have done lot's of PSU's and no issue at all.

Again I have been careful to put in right holes. But as far as electricity I never once have had issues with paperclips. Only issue with ATX psu is if you use wrong holes.

How to guess the correct holes if not ?

There is no guessing. Use a good guide follow it. If you are guessing that is bad.

Most you can follow a guide and its easy because of the color of wires. Others if not colored you have to count to find.

At this point with your questions I highly suggest getting a switch and not doing wire. To ask about guessing holes makes me worry for you if you don't just buy a switch.

you if mean right in holes right color. i know which color holes should will make.

Yes you will see a green and black wire that are being used:http://www.seasonic.ru/tech-support/jump-start/

With all the questions in the threads I honestly think you should go with a psu switch. I think some of the information about this method seems to be lost in translation for lack of a better turn.

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

Quote from: notlist3d on April 08, 2015, 01:29:59 AM

Quote from: ToQcHista on April 08, 2015, 01:16:39 AM

Quote from: notlist3d on April 07, 2015, 03:18:26 PM

Quote from: ?? on ??

Quote from: ToQcHista on April 07, 2015, 10:05:09 AM

thanks.

undertood.

but.

this very small amount of electricity bad is ?

No

It is fine and not an issue.

I have done lot's of PSU's and no issue at all.

Again I have been careful to put in right holes. But as far as electricity I never once have had issues with paperclips. Only issue with ATX psu is if you use wrong holes.

How to guess the correct holes if not ?

There is no guessing. Use a good guide follow it. If you are guessing that is bad.

Most you can follow a guide and its easy because of the color of wires. Others if not colored you have to count to find.

At this point with your questions I highly suggest getting a switch and not doing wire. To ask about guessing holes makes me worry for you if you don't just buy a switch.

you if mean right in holes right color. i know which color holes should will make.

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: ToQcHista on April 08, 2015, 01:16:39 AM

Quote from: notlist3d on April 07, 2015, 03:18:26 PM

Quote from: ?? on ??

Quote from: ToQcHista on April 07, 2015, 10:05:09 AM

thanks.

undertood.

but.

this very small amount of electricity bad is ?

No

It is fine and not an issue.

I have done lot's of PSU's and no issue at all.

Again I have been careful to put in right holes. But as far as electricity I never once have had issues with paperclips. Only issue with ATX psu is if you use wrong holes.

How to guess the correct holes if not ?

There is no guessing. Use a good guide follow it. If you are guessing that is bad.

Most you can follow a guide and its easy because of the color of wires. Others if not colored you have to count to find.

At this point with your questions I highly suggest getting a switch and not doing wire. To ask about guessing holes makes me worry for you if you don't just buy a switch.

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

Quote from: notlist3d on April 07, 2015, 03:18:26 PM

Quote from: ?? on ??

Quote from: ToQcHista on April 07, 2015, 10:05:09 AM

thanks.

undertood.

but.

this very small amount of electricity bad is ?

No

It is fine and not an issue.

I have done lot's of PSU's and no issue at all.

Again I have been careful to put in right holes. But as far as electricity I never once have had issues with paperclips. Only issue with ATX psu is if you use wrong holes.

How to guess the correct holes if not ?

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: ?? on ??

Quote from: ToQcHista on April 07, 2015, 10:05:09 AM

thanks.

undertood.

but.

this very small amount of electricity bad is ?

No

It is fine and not an issue.

I have done lot's of PSU's and no issue at all.

Again I have been careful to put in right holes. But as far as electricity I never once have had issues with paperclips. Only issue with ATX psu is if you use wrong holes.

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

thanks.

coming soon will arrives my country s3.

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

thanks.

undertood.

but.

this very small amount of electricity bad is ?

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

Quote from: notlist3d on April 07, 2015, 09:56:01 AM

Quote from: ToQcHista on April 07, 2015, 09:53:44 AM

paperclip don't know hot ?

If in proper holes, no paperclip does not get hot. It's a very small amount of electricity.

I think you might put your mind at ease and buy one of those switches at this point.

i that will right holes don't will get hot ?

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: ToQcHista on April 07, 2015, 09:53:44 AM

paperclip don't know hot ?

If in proper holes, no paperclip does not get hot. It's a very small amount of electricity.

I think you might put your mind at ease and buy one of those switches at this point.

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

paperclip don't know hot ?

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: ?? on ??

Quote from: ToQcHista on April 07, 2015, 09:37:46 AM

Quote from: notlist3d on April 07, 2015, 09:29:36 AM

Quote from: ToQcHista on April 07, 2015, 09:22:59 AM

yes, i don't use that will hot psu cables and i will use paperclip/.

Get a quality power supply and heat should not be a issue. It should use a proper gauge where it can mine fine.

With all the threads you have put way to much thought into PSU and jumping it.

i will paperclip and after sometimes turn off s3 and i check if is hot paperclip or cables or other . this better for safety

If you're that nervous just buy an ant jumper http://www.amazon.com/AntMiner-Supply-Jumper-Switch-Bitcoin/dp/B00NB2F9LY

It's been brought up before. I agree if feeling so nervous/not comfortable with paper clip use a switch for 5-10 bucks and dont worry.

Also again the paperclip should not feel hot. It is a VERY small amount of electricity when in proper holes starting psu.

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

Quote from: notlist3d on April 07, 2015, 09:29:36 AM

Quote from: ToQcHista on April 07, 2015, 09:22:59 AM

yes, i don't use that will hot psu cables and i will use paperclip/.

Get a quality power supply and heat should not be a issue. It should use a proper gauge where it can mine fine.

With all the threads you have put way to much thought into PSU and jumping it.

i will paperclip and after sometimes turn off s3 and i check if is hot paperclip or cables or other . this better for safety

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: ToQcHista on April 07, 2015, 09:22:59 AM

yes, i don't use that will hot psu cables and i will use paperclip/.

Get a quality power supply and heat should not be a issue. It should use a proper gauge where it can mine fine.

With all the threads you have put way to much thought into PSU and jumping it.

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

yes, i don't use that will hot psu cables and i will use paperclip/.

Prelude

legendary

Activity: 1596

Merit: 1000

What are you trying to do? If you're just trying to turn a PSU on, use a paper clip. End of story.

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

probably this cable is better > https://www.google.com/search?q=shielded+cable&client=opera&hs=6XM&source=lnms&tbm=isch&sa=X&ei=e3seVebYDcyQ7AbB_YG4Cw&ved=0CAgQ_AUoAg&biw=1920&bih=971

kpitti

legendary

Activity: 924

Merit: 1002

To be honest I do not understand what you are exactly looking for. If you are interested in proper setup of HW Miner using standard PSU then I would auggest to you instead of asking silly questions to read here in this thread quidance which will help you: https://bitcointalksearch.org/topic/guide-dogies-comprehensive-manufacturer-trustworthiness-guide-1st-feb-2016-456691

[Guide] Dogie's Comprehensive Manufacturer Trustworthiness Guide [27th Feb] is very good and valid information to start with.

Hope it helps you.

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

How to will Understud s3 temperatura?

Topic: PSU wire will not hot ? (Read 2382 times)