Topic: Question: Where can I find Avalon ASIC Batch #1 install guide? (Read 7083 times)
Thank you!!
sudo cgminer then all working! (avg):66.8Gh/s!! 
Consultations Bitbird techwtf Right on spot !
sudo cgminer then all working! (avg):66.8Gh/s!!
@techwtf
OK, where's the debugging info?
Right! "Built with avalon mining support." on the screen.
with -D --verbose, every displayed line should be debugging info, but I'm not sure why it didn't detect your device...OK, where's the debugging info?
Right! "Built with avalon mining support." on the screen.
Edit: please run as root user, with su or sudo
@loshia
I see. Want to post the debugging info/report but don't know where to find it..
PM me a teamwier to your Windows box near by your avalon:) I see. Want to post the debugging info/report but don't know where to find it..
@loshia
I see. Want to post the debugging info/report but don't know where to find it..
I see. Want to post the debugging info/report but don't know where to find it..
@loshia
Yes, latest openwrt image has been upgraded.
Did you mean I need to connect Avalon to PC via the WR703N board not from the controller board?
Yes, latest openwrt image has been upgraded.
Did you mean I need to connect Avalon to PC via the WR703N board not from the controller board?
I think it does not matter if you will use PC or WR703N.
What about debug cgminer output as suggested can you post this
@loshia
Yes, latest openwrt image has been upgraded.
Did you mean I need to connect Avalon to PC via the WR703N board not from the controller board?
Yes, latest openwrt image has been upgraded.
Did you mean I need to connect Avalon to PC via the WR703N board not from the controller board?
@techwtf
OK, where's the debugging info?
Right! "Built with avalon mining support." on the screen.
OK, where's the debugging info?
Right! "Built with avalon mining support." on the screen.
@techwtf
These has been done. So there might by other problem?
@loshia
ls -la /dev/ttyU* showing /dev/ttyUSB0,
P5 has been removed,
USB cables OK,
plug USB cable from Avalon controller board to windows found RT232R USB UART.
These has been done. So there might by other problem?
@loshia
ls -la /dev/ttyU* showing /dev/ttyUSB0,
P5 has been removed,
USB cables OK,
plug USB cable from Avalon controller board to windows found RT232R USB UART.
Fuck ...Did you upgrade to latest openwrt image?
Please check if your cigminer starts with -S/dev/ttyUSB0
There are two things left - Power cabels from PDu to each Avalon to be faulty, or interface cables to be faulty...
The easiest is to upgrade image first...then manually start cgminer with appropriate ttyUSB
And finaly check all boards one by one.
1. Leave only one AVALON ASIC board powered and start cgminer with
http://en.qi-hardware.com/wiki/Avalon
115200:8:10:45:282.
Check both three of them one buy one. There might be faulty board (or cables/power) doing this you will know which one has problems
@techwtf
These has been done. So there might by other problem?
@loshia
ls -la /dev/ttyU* showing /dev/ttyUSB0,
P5 has been removed,
USB cables OK,
plug USB cable from Avalon controller board to windows found RT232R USB UART.
./cgminer -hThese has been done. So there might by other problem?
@loshia
ls -la /dev/ttyU* showing /dev/ttyUSB0,
P5 has been removed,
USB cables OK,
plug USB cable from Avalon controller board to windows found RT232R USB UART.
should say: "Built with avalon mining support."
@techwtf
These has been done. So there might by other problem?
@loshia
ls -la /dev/ttyU* showing /dev/ttyUSB0,
P5 has been removed,
USB cables OK,
plug USB cable from Avalon controller board to windows found RT232R USB UART.
These has been done. So there might by other problem?
@loshia
ls -la /dev/ttyU* showing /dev/ttyUSB0,
P5 has been removed,
USB cables OK,
plug USB cable from Avalon controller board to windows found RT232R USB UART.
with -D --verbose, paste some debugging info?
@techwtf
These has been done. So there might by other problem?
@loshia
ls -la /dev/ttyU* showing /dev/ttyUSB0,
P5 has been removed,
USB cables OK,
plug USB cable from Avalon controller board to windows found RT232R USB UART.
These has been done. So there might by other problem?
@loshia
ls -la /dev/ttyU* showing /dev/ttyUSB0,
P5 has been removed,
USB cables OK,
plug USB cable from Avalon controller board to windows found RT232R USB UART.
@loshia
Yes, the USB hub has been changed by a workable one. And been connected to PC, but when running ./cgminer it come out: "All devices disabled, canot mine!"
Yes, the USB hub has been changed by a workable one. And been connected to PC, but when running ./cgminer it come out: "All devices disabled, canot mine!"
Check Usb Cables
inspect dmesg Wr703 and see all masages about USB and FTTDI
ls -la /dev/ttyU* should tell you if you can see the usb
Remove jumper p5 and just plug USB cable from avalon to any windows just to save time you should see found new USB device bla bla if you see it it will work in Linux if not something is wrong
Again change all usb cables first
@loshia
Yes, the USB hub has been changed by a workable one. And been connected to PC, but when running ./cgminer it come out: "All devices disabled, canot mine!"
Yes, the USB hub has been changed by a workable one. And been connected to PC, but when running ./cgminer it come out: "All devices disabled, canot mine!"
need to specify device, as http://en.qi-hardware.com/wiki/Avalon
(should remove -D --verbose later)
# cgminer -S /dev/ttyUSB0 -o stratum.btcguild.com:3333 -O xxxx:yyyy -D --verbose --avalon-options 115200:24:10:45:282 --api-allow "W:0/0" --api-listen
@loshia
Yes, the USB hub has been changed by a workable one. And been connected to PC, but when running ./cgminer it come out: "All devices disabled, canot mine!"
Yes, the USB hub has been changed by a workable one. And been connected to PC, but when running ./cgminer it come out: "All devices disabled, canot mine!"
@loshia
I'm working on the option1:
1. Remove jumper, use linux i386 pc compile https://github.com/BitSyncom/cgminer avalon branch and go
Thanks!
Super!I'm working on the option1:
1. Remove jumper, use linux i386 pc compile https://github.com/BitSyncom/cgminer avalon branch and go
Thanks!
Let us know how is going on. Have you tried to change usb hub as ng suggested?
@loshia
I'm working on the option1:
1. Remove jumper, use linux i386 pc compile https://github.com/BitSyncom/cgminer avalon branch and go
Thanks!
I'm working on the option1:
1. Remove jumper, use linux i386 pc compile https://github.com/BitSyncom/cgminer avalon branch and go
Thanks!
what would be the purpose of 3G?
Automated internet connectivity backup dude:)
Shit always happens
well now that would be cool. i have 4G service
3G is enough
belie me but with 4G you will able to use torrents on top 
what would be the purpose of 3G?
Automated internet connectivity backup dude:)
Shit always happens
well now that would be cool. i have 4G service
Jump to: