Topic: Question: Where can I find Avalon ASIC Batch #1 install guide? - page 3. (Read 7083 times)
it will not work if there is no hub between the 703N and controller board.
Well, unfortunately it didn't just work. My Avalon#1 running maybe few seconds after every reboot then always stop working. I'll continue working on the problem next day. Thanks for all the help from you guys.
If you log into the web interface, what does the Status -> Overview -> Status
System
Firmware Version
say?
OpenWrt Barrier Breaker r35097 / LuCI Trunk (trunk+svn9610)
is working fine.
no clue on how to relate that to the release names at
http://downloads.qi-hardware.com/people/xiangfu/avalon/
though...
edit: OK if you download the file http://downloads.qi-hardware.com/people/xiangfu/avalon/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory-20130225.bin
you'll find in the header the referrence
Code:
OpenWrt
r35097
so that is the version shipping out on the current working Avalon
Well, unfortunately it didn't just work. My Avalon#1 running maybe few seconds after every reboot then always stop working. I'll continue working on the problem next day. Thanks for all the help from you guys.
upgrade your firmware to 20130225 version. http://downloads.qi-hardware.com/people/xiangfu/avalon/Update: you still have to use the hub as ngzhang says. huh
Well, unfortunately it didn't just work. My Avalon#1 running maybe few seconds after every reboot then always stop working. I'll continue working on the problem next day. Thanks for all the help from you guys.
After skipped the USB hub inside the case and directly connected the controller board to ethernet board the blue light on! Going to 192.168.0.101 setup screen now.
Congratulations.... And enjoy!
After skipped the USB hub inside the case and directly connected the controller board to ethernet board the blue light on! Going to 192.168.0.101 setup screen now.
@techwtf
No blue light from the front side or from the ethernet board inside the case. The USB hub inside the case showed red light.
No blue light from the front side or from the ethernet board inside the case. The USB hub inside the case showed red light.
USB hub has a red light.
WR703N has a blue light.
WR703N is powered by USB hub via a USB cable.
If WR703N is connected well with USB hub, you could see that blue light.
@techwtf
No blue light from the front side or from the ethernet board inside the case. The USB hub inside the case showed red light.
you may pick the 703n out of the box & use micro usb to power the 703n. alternately you can use a longer USB A-to-B type cable to get rid of the usb hub. No blue light from the front side or from the ethernet board inside the case. The USB hub inside the case showed red light.
OK... I connected Avalon to my laptop's ethernet port then switch the power on, but the light of ethernet port was dark. So I switch off the power for now. Was there something I missed out? 
Connect using an ethernet switch.1) Connect laptop to ethernet switch
2) Connect Avalon to same ethernet switch
@techwtf
No blue light from the front side or from the ethernet board inside the case. The USB hub inside the case showed red light.
Are USb cables OK?No blue light from the front side or from the ethernet board inside the case. The USB hub inside the case showed red light.
check if J5 is in please also
From FAQ
Connect to PC
Notice if you want to plug the USB to a computer instead of 703N (Ethernet board), you must remove the Jumper on the controller board. the jumper's label is P5, next to the USB port.
So the jumper must be there not removed
As an alternative you can remove Jumper P5 and plug the usb cable which connected the usb hub in your PC. You should see (windows) new hardware found USb bla bla
doing this you will know that the problem is inside the white USB switch or Ethernet board itself But you have to remove the jumper when doing PC test
@techwtf
No blue light from the front side or from the ethernet board inside the case. The USB hub inside the case showed red light.
No blue light from the front side or from the ethernet board inside the case. The USB hub inside the case showed red light.
@loshia
@techwtf
Thanks! Opening the case for checking now.
@techwtf
Thanks! Opening the case for checking now.
OK... I connected Avalon to my laptop's ethernet port then switch the power on, but the light of ethernet port was dark. So I switch off the power for now. Was there something I missed out?
read my review: https://bitcointalksearch.org/topic/my-impression-of-avalon-machine-cooling-info-updated-145885can you see a tiny blue light from the front side (not the backside or fan)?
OK... I connected Avalon to my laptop's ethernet port then switch the power on, but the light of ethernet port was dark. So I switch off the power for now. Was there something I missed out?
Cable probably? It may be damaged one. Other stuff as long as Wr703 is powered via usb there were reports of not connected (loose) cable because of transportation. Remove the cover of the unit and make sure all cables are in place especially USBIs it OK? crossover or straight. Other way to go is to use network switch switch or LAN of the soho router
OK... I connected Avalon to my laptop's ethernet port then switch the power on, but the light of ethernet port was dark. So I switch off the power for now. Was there something I missed out?
Did you receive an Avalon? or tracking ?
He just received an Avalon in Taiwan.
Check it out Bitbird:
http://en.qi-hardware.com/wiki/Avalon
Keep us posted on how it goes please. Everyone's dying for first hand accounts.
@libertybuck
@loshia
Thank you!
@loshia
Thank you!
Did you receive an Avalon? or tracking ?
@libertybuck
@loshia
Thank you!
@loshia
Thank you!
Where can I find an Avalon ASIC Batch #1 install guide? (If it does exist.) Thanks!
1 make your PC with IP like 192.168.0.33/255.255.255.255
2. Conect PL Ethernet to avalon Ethernet
3. Login to avalon http://192.168.0.100
4. Configure avalon unit to have Ethernet (Ip/mask/GW/DNS or DHCP) via wireless or wire save applay and when using wire just connect the unit in your router or whatever
6. Eneter your pools url sers and works in the web there is a web tab tab
7 Save apply and reboot
8 enjoy
Where can I find an Avalon ASIC Batch #1 install guide? (If it does exist.) Thanks!
http://en.qi-hardware.com/wiki/Avalon
Jump to: