R9 Nano Modded Rom - page 23. | Bitcointalksearch.org

Dannison

newbie

Activity: 27

Merit: 0

Quote from: Termie on May 08, 2016, 03:38:12 AM

Tried your Nano BIOS right now at my MSI, the conservative 100/100 version.
Flashed, reboot -> Game over. No screen, no windows, 100% fan speed, thats all.
Flashed back the org. ROM after using dual BIOS switch at card, fortunately it runs again now.

So "thanks" for the fright and 1/2 hour wasted mining time. Angry

I had similar problem on one of my sapphire cards. I flashed the -200mV one. I had to use the bios switch and flash the -150 mV ROM. It works well now.

kahir

legendary

Activity: 1050

Merit: 1000

anyone getting good results with the dual eth/dcr miner and minding to share them

ldw-com

full member

Activity: 229

Merit: 100

Quote from: Termie on May 08, 2016, 03:38:12 AM

Tried your Nano BIOS right now at my MSI, the conservative 100/100 version.
Flashed, reboot -> Game over. No screen, no windows, 100% fan speed, thats all.
Flashed back the org. ROM after using dual BIOS switch at card, fortunately it runs again now.

So "thanks" for the fright and 1/2 hour wasted mining time. Angry

You must have done something wrong then.

I have flashed all of my cards (100) several times. So i've probably flashed over 300 times already. NEVER had 1 problem.

There are a lot of others here that are using my rom, ask them, they are running it and do not have any problems.

Before you start flaming, read the previous posts from other users and perhaps ask some questions.

I'm here to help where i can with what i can.

1. Flash the stock rom back to your secondary bios, boot it from there, see if it boots.
2. If it does. Good. Flash the -100mV core, -106mV mem rom and COMPLETELY shut down your system, do not reboot, SHUT DOWN.
3. If this does not work, then it's probably a faulty bios, but definitely NOT the rom! I do not know for sure, but it "Could" be that MSI is different, although that i seriously doubt that.
4. If it does boot, completely remove your drivers, (DDU "display driver uninstaller"), also remove any oc software like Trixx, AB, ...

If you have any problems, questios, just ask, i'm here to help.

Greetings

Edit: Reuploaded the roms with a not so heavy underclock on the memory part.

-100mV Core Clock, -50 & -100mV Mem Clock

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: Termie on May 08, 2016, 03:38:12 AM

Tried your Nano BIOS right now at my MSI, the conservative 100/100 version.
Flashed, reboot -> Game over. No screen, no windows, 100% fan speed, thats all.
Flashed back the org. ROM after using dual BIOS switch at card, fortunately it runs again now.

So "thanks" for the fright and 1/2 hour wasted mining time. Angry

you use MSI Nano? Where did you get them?

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: Eliovp on May 08, 2016, 02:49:28 AM

Quote from: citronick on May 07, 2016, 08:30:09 PM

Quote from: Mulzatas on May 07, 2016, 02:34:21 PM

Without mod, according to the OP:

"My nano rig (6 x Nano) would do around 170Mh/s "give or take" on Ethereum (stock settings) while pulling 6.8Amps from the wall!
So that's around 1500watt."

thanks - need just that confirmation before clicking that ENTER button to purchase some of these Nanos.

Btw, I know that OP using Sapphire and that works with mod, would other brands like XFX or Gigabtye, Asus be worth trying out?

I noticed there is no MSI for Nanos on Amazon or Newegg. Damn shame, MSI makes good stuff.

Hey Citronick,

Doesn't matter what brand you choose. They're all reference designs anyway. The only thing that differs is the Sticker on the fan.

I chose Sapphire because i got the best deal with them.

Greetings!

thanks - will report soon on 6 nano rigs under single 1600w using your mod - nothing aggressive but I want to be as near to the 180MHs mark per rig.

Termie

sr. member

Activity: 642

Merit: 292

Tried your Nano BIOS right now at my MSI, the conservative 100/100 version.
Flashed, reboot -> Game over. No screen, no windows, 100% fan speed, thats all.
Flashed back the org. ROM after using dual BIOS switch at card, fortunately it runs again now.

So "thanks" for the fright and 1/2 hour wasted mining time. Angry

Eliovp

legendary

Activity: 1050

Merit: 1293

Huh?

Quote from: Maticul on May 08, 2016, 02:54:27 AM

If you mod the AMD R9 390 memory controller voltage or the memory voltage with -150 mV, how much can you save at 1200 MHz memory frequency?

I will write my findings for the 390 mod later

Personal things are taking a lot of my time right now, will definitely report back!

Greetings

Maticul

newbie

Activity: 37

Merit: 0

If you mod the AMD R9 390 memory controller voltage or the memory voltage with -150 mV, how much can you save at 1200 MHz memory frequency?

Eliovp

legendary

Activity: 1050

Merit: 1293

Huh?

Quote from: citronick on May 07, 2016, 08:30:09 PM

Quote from: Mulzatas on May 07, 2016, 02:34:21 PM

Without mod, according to the OP:

"My nano rig (6 x Nano) would do around 170Mh/s "give or take" on Ethereum (stock settings) while pulling 6.8Amps from the wall!
So that's around 1500watt."

thanks - need just that confirmation before clicking that ENTER button to purchase some of these Nanos.

Btw, I know that OP using Sapphire and that works with mod, would other brands like XFX or Gigabtye, Asus be worth trying out?

I noticed there is no MSI for Nanos on Amazon or Newegg. Damn shame, MSI makes good stuff.

Hey Citronick,

Doesn't matter what brand you choose. They're all reference designs anyway. The only thing that differs is the Sticker on the fan.

I chose Sapphire because i got the best deal with them.

Greetings!

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: Mulzatas on May 07, 2016, 02:34:21 PM

Without mod, according to the OP:

"My nano rig (6 x Nano) would do around 170Mh/s "give or take" on Ethereum (stock settings) while pulling 6.8Amps from the wall!
So that's around 1500watt."

thanks - need just that confirmation before clicking that ENTER button to purchase some of these Nanos.

Btw, I know that OP using Sapphire and that works with mod, would other brands like XFX or Gigabtye, Asus be worth trying out?

I noticed there is no MSI for Nanos on Amazon or Newegg. Damn shame, MSI makes good stuff.

Mulzatas

full member

Activity: 249

Merit: 100

Without mod, according to the OP:

"My nano rig (6 x Nano) would do around 170Mh/s "give or take" on Ethereum (stock settings) while pulling 6.8Amps from the wall!
So that's around 1500watt."

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

what is the stock wattage out of the box without mod for the nano?
could I put 6 on a system with 1600w PSU?

Eliovp

legendary

Activity: 1050

Merit: 1293

Huh?

Quote from: agente on May 06, 2016, 09:08:45 AM

usefull information to share with you...
I have a lot of GPU (nano of course) that works good with -175mv but 20% works only with -135mv. just one gpu in 6 gpu rig and all system is not stable and freeze. So... start from -135mv always! and than... maybe... lower

I lost two nights...

I should have mentioned that earlier.

I haven't had a lot of those problems though, i must be lucky i guess..

I had a few that were giving me some issues, like 2 out of 100. (I flash my cards remotely and only hook up a screen to install drivers..)

agente

full member

Activity: 239

Merit: 100

usefull information to share with you...
I have a lot of GPU (nano of course) that works good with -175mv but 20% works only with -135mv. just one gpu in 6 gpu rig and all system is not stable and freeze. So... start from -135mv always! and than... maybe... lower

I lost two nights...

ldw-com

full member

Activity: 229

Merit: 100

Quote from: citronick on May 05, 2016, 11:52:04 PM

Ellovp,

is 8 x GPU possible under Ubuntu, using 1 x 1600 PSU, using that 3-to-1 PCI riser + 5 x normal PCI riser?

Should work with 8, check the Ethereum forums. "forum.ethereum.org

There's a few guys (at least one for sure) that are running 8Gpu's.

Quote from: mikewillda on May 06, 2016, 02:05:56 AM

Quote from: citronick on May 05, 2016, 11:52:04 PM

Ellovp,

is 8 x GPU possible under Ubuntu, using 1 x 1600 PSU, using that 3-to-1 PCI riser + 5 x normal PCI riser?

I tried to use 4x7990 or other combination of 2X7990+4X390. That is in Windows with 6 PCIE slots. I cannot go beyond 8 GPU.

Yeah, i have a few of those splitters as well, had issues with windows recognizing them. Windows kept seeing that splitter but not my gpu's.

I still have them, i could still try and make it work but haven't really had the time to play around with those things

.

Maybe later.

Greetings

Edit: Found it: http://forum.ethereum.org/discussion/comment/26366

mikewillda

full member

Activity: 219

Merit: 100

CTO/Spokesman

Quote from: citronick on May 05, 2016, 11:52:04 PM

Ellovp,

is 8 x GPU possible under Ubuntu, using 1 x 1600 PSU, using that 3-to-1 PCI riser + 5 x normal PCI riser?

I tried to use 4x7990 or other combination of 2X7990+4X390. That is in Windows with 6 PCIE slots. I cannot go beyond 8 GPU.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Ellovp,

is 8 x GPU possible under Ubuntu, using 1 x 1600 PSU, using that 3-to-1 PCI riser + 5 x normal PCI riser?

Eliovp

legendary

Activity: 1050

Merit: 1293

Huh?

Quote from: rednoW on May 05, 2016, 06:43:33 AM

Quote from: Eliovp on May 03, 2016, 05:19:12 PM

That is correct

Regarding the 390 rom, will update OP this week for sure! "Been updating some other things first.."

In posts before you've said that you was able to change memory voltage by software on 290-series card.
Did you mean memory voltage or aux voltage (vddci) that can be modded by Afterburner or HawaiiBiosReader?
If first could you please explain how did you change mem voltage?

Hey Rednow,

I was talking about memory voltage, not aux voltage.

But i thought it was basically the same as with Fiji, but it clearly isn't

I'll post some results later, have had a very busy week.

Greetings

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: Eliovp on May 03, 2016, 05:19:12 PM

That is correct

Regarding the 390 rom, will update OP this week for sure! "Been updating some other things first.."

In posts before you've said that you was able to change memory voltage by software on 290-series card.
Did you mean memory voltage or aux voltage (vddci) that can be modded by Afterburner or HawaiiBiosReader?
If first could you please explain how did you change mem voltage?

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

reserved - for my next project

Topic: R9 Nano Modded Rom - page 23. (Read 60873 times)