Pages:
Author

Topic: Radeon™ RX 560 Gaming OC 4G (rev. 1.0) 16.3MH/s bios - page 4. (Read 13079 times)

sr. member
Activity: 2604
Merit: 326
Someone asked so here it is...this BIOS is for this card only (not v2, which is worse, but you can probably try same strap
with lower hashrate)

https://www.gigabyte.com/Graphics-Card/GV-RX560GAMING-OC-4GD-rev-10#kf


BIOS link:

https://[Suspicious link removed]/QikERJ

Your result may vary (silicon lottery, worse cooling - because I replaced thermal paste with Arctic Cooling MX3, as
original one is not good at all, etc)

I played a bit more and managed to get hashrate to flow between 16.5 and 17.1 in Phoenixminer, but with
some memory errors in HWinfo , so I consider this the best I managed to get)

How much for wall ?


30-45W, depending on algorithm...I have efficient platinum PSU, so a bit more if you use bronze, silver or gold
newbie
Activity: 15
Merit: 0
Someone asked so here it is...this BIOS is for this card only (not v2, which is worse, but you can probably try same strap
with lower hashrate)

https://www.gigabyte.com/Graphics-Card/GV-RX560GAMING-OC-4GD-rev-10#kf


BIOS link:

https://[Suspicious link removed]/QikERJ

Your result may vary (silicon lottery, worse cooling - because I replaced thermal paste with Arctic Cooling MX3, as
original one is not good at all, etc)

I played a bit more and managed to get hashrate to flow between 16.5 and 17.1 in Phoenixminer, but with
some memory errors in HWinfo , so I consider this the best I managed to get)

http://i.imgur.com/nH9eXir.png
How much for wall ?
jr. member
Activity: 196
Merit: 1
Anyone can share results, I'm specially interested about cryptonight, as there are a lot of mining programs, and
various configurations (and I don't have enough time to test all)
Hi Branko! I was using your old Micron strap in my Powercolor RX460 (with RX560 bios) with GatelessGate Sharp with 49/8/2 and performance is good. I'll try your newer bios, but I have issues with capacitors and my RX460/560 boots at 20% starts, so I have to fix it before.

It's really impressive what you reached. 16MH/s+ in a cheap board like this is awesome.
sr. member
Activity: 2604
Merit: 326
Anyone can share results, I'm specially interested about cryptonight, as there are a lot of mining programs, and
various configurations (and I don't have enough time to test all)
newbie
Activity: 69
Merit: 0
Very kind of you Branko, considering how people have been trying to sell these Bios. Now if only I had some of these cards. Huge value for money!
member
Activity: 134
Merit: 10
thanx, will try the mem strap with my microns
sr. member
Activity: 2604
Merit: 326
newbie
Activity: 52
Merit: 0
Thanks a lot, Branko.
Could you upload the original bios as well, please?
sr. member
Activity: 2604
Merit: 326
Someone asked so here it is...this BIOS is for this card only (not v2, which is worse, but you can probably try same strap
with lower hashrate)

https://www.gigabyte.com/Graphics-Card/GV-RX560GAMING-OC-4GD-rev-10#kf


BIOS link:

https://goo.gl/QikERJ

Your result may vary (silicon lottery, worse cooling - because I replaced thermal paste with Arctic Cooling MX3, as
original one is not good at all, etc)

I played a bit more and managed to get hashrate to flow between 16.5 and 17.1 in Phoenixminer, but with
some memory errors in HWinfo , so I consider this the best I managed to get)

Pages:
Jump to: