Topic: [RAFFLE #2!] MMXIV raffling off TWO Antminer S3 - SOLD OUT IN UNDER 6 DAYS - page 4. (Read 5899 times)
August 23, 2014, 08:53:45 PM
Do I have to win this one too
August 23, 2014, 03:07:40 PM
Good luck all, and thank you for the entry 
No problem. Thanks for entering in the first Raffle!
August 23, 2014, 02:16:54 PM
Good luck all, and thank you for the entry
August 23, 2014, 03:53:40 AM
Raffle is sold out. Please do not send more coins
Wasn't expecting it to sell out this fast! We will do the drawing early next week, I'll figure out the best time this weekend to get the most people on at once to make sure it's a fair drawing. I have to scramble up the list and stuff still anyway. This round took less than 6 days to fully sell out! Great job everyone!
Thanks to everyone who participated! Those of you watching, but haven't joined in, yet, we have a BTC Raffle going on right now!
You can check it out here: https://bitcointalksearch.org/topic/raffle-3-maieuticoin-raffling-two-antminer-s3-1-ticket-02-btc-100-max-760702 or you can enter automatically on http://www.mmxivcoin.com/raffle.html
That's right, more mining hardware!
In addition to our $25,000 Mining Equipment Challenge, we are now doing a raffle to celebrate the S3 launch!
It's very easy to enter. Tickets are 2 MMXIV per entry
Just post here or send me a message saying you want to enter and I will PM you a unique MMXIV address for your entries
Each ticket will be 2 MMXIV Coin. You can purchase as many tickets as you'd like
Winner will be drawn at 100 tickets sold so each ticket is a 1% chance to win
If we don't reach 100 tickets, I'll raffle a single unit instead
We are raising the price to 2 MMXIV this round because everyone who bought a ticket in the first raffle gets one for free in the second!!
I will keep doing raffles like this all the time if there is community interest
You can keep track of the total entries so far on this doc:
https://docs.google.com/spreadsheets/d/1OR8iqI7GsAvNqwLWfbYrlnhm0CaOdm9qlVUvvOChhQ8
Here is some proof that my raffles are legit from the first batch!
From https://bitcointalksearch.org/topic/raffle-mmxiv-is-raffling-off-two-antminer-s3s-sold-out-drawing-on-the-27th-671686
In addition to our $25,000 Mining Equipment Challenge, we are now doing a raffle to celebrate the S3 launch!
It's very easy to enter. Tickets are 2 MMXIV per entry
Just post here or send me a message saying you want to enter and I will PM you a unique MMXIV address for your entries
Each ticket will be 2 MMXIV Coin. You can purchase as many tickets as you'd like
Winner will be drawn at 100 tickets sold so each ticket is a 1% chance to win
If we don't reach 100 tickets, I'll raffle a single unit instead
We are raising the price to 2 MMXIV this round because everyone who bought a ticket in the first raffle gets one for free in the second!!
I will keep doing raffles like this all the time if there is community interest
You can keep track of the total entries so far on this doc:
https://docs.google.com/spreadsheets/d/1OR8iqI7GsAvNqwLWfbYrlnhm0CaOdm9qlVUvvOChhQ8
Here is some proof that my raffles are legit from the first batch!
From https://bitcointalksearch.org/topic/raffle-mmxiv-is-raffling-off-two-antminer-s3s-sold-out-drawing-on-the-27th-671686
Got my S3s today from the MMXIV raffle 
Thanks a ton MMXIV!!!
Thanks a ton MMXIV!!!
Winner is responsible for any customs or import fees
The raffle covers the cost of 2 x S3 units on Bitmaintech.com at time of drawing
The raffle covers the cost of 2 x S3 units on Bitmaintech.com at time of drawing
Quote from: Bitmaintech.com
Bitmain is proud to announce the sale of AntMiner S3 for 0.75 BTC each to include International shipping. S3 is hashing at 478 GH/s while consumes 366 Watt power from the wall.
AntMiner S3 is the third generation Bitcoin mining rig made by Bitmain. It uses the state of the art BM1382 chip powered by the 28nm tech process with ultra-low power consumption, targeting the best combination of power efficiency and low capital expenditure for mining investors.
Specifications:
Hash Rate: 478 GH/s±5%
Power Consumption: 366 Watt at the wall
Power Efficiency: 0.77 J/GH on wall
Power Supply: 12V DC
Size: 331 mm x 137 mm x 160 mm
Fans: Two 14038 fans mounted on both front and back ends.
Operating Temperature: 0 °C to 35 °C
Complied with: FCC / CE
Network Connection: Ethernet
Notes:
Power consumption: This figure depends on the PSU efficiency, ambient temperature and the accuracy of the power meters.
PSU: You have to prepare your own the ATX PSU. The S3 ships without a PSU. There are 4 PCI-e connectors for +12V DC input, but it only needs to connect two of them if without overclocking (PSU not included). Don’t parallel connected different DC input from different PSU into the same Hashing board.
Features:
Stand alone: The S3 mines stand alone, needs no proxy server.
Quiet: The customized heat sinks mounted to the hash boards, one box over S3 to control the air flow, two fans mounted on both front and back ends that mean fans are able to work at lower speed to dissipate all heat easily. This design let S3 run at much lower noise level.
Stable: Running 24 hours a day with minimal downtime.
Accurate: Hardware Error got from the sample unit rate is as low as 0.01%, hundreds times better than some competing products.
Efficient: High energy efficiency to save your investment on PSU and electricity bills.
AntMiner S3 is the third generation Bitcoin mining rig made by Bitmain. It uses the state of the art BM1382 chip powered by the 28nm tech process with ultra-low power consumption, targeting the best combination of power efficiency and low capital expenditure for mining investors.
Specifications:
Hash Rate: 478 GH/s±5%
Power Consumption: 366 Watt at the wall
Power Efficiency: 0.77 J/GH on wall
Power Supply: 12V DC
Size: 331 mm x 137 mm x 160 mm
Fans: Two 14038 fans mounted on both front and back ends.
Operating Temperature: 0 °C to 35 °C
Complied with: FCC / CE
Network Connection: Ethernet
Notes:
Power consumption: This figure depends on the PSU efficiency, ambient temperature and the accuracy of the power meters.
PSU: You have to prepare your own the ATX PSU. The S3 ships without a PSU. There are 4 PCI-e connectors for +12V DC input, but it only needs to connect two of them if without overclocking (PSU not included). Don’t parallel connected different DC input from different PSU into the same Hashing board.
Features:
Stand alone: The S3 mines stand alone, needs no proxy server.
Quiet: The customized heat sinks mounted to the hash boards, one box over S3 to control the air flow, two fans mounted on both front and back ends that mean fans are able to work at lower speed to dissipate all heat easily. This design let S3 run at much lower noise level.
Stable: Running 24 hours a day with minimal downtime.
Accurate: Hardware Error got from the sample unit rate is as low as 0.01%, hundreds times better than some competing products.
Efficient: High energy efficiency to save your investment on PSU and electricity bills.
Quote
Drawing Details:
1) Go to http://www.random.org/integers/
2) Switch to Advanced Mode
3) Configure to look like this:
4) The randomization string will be the current headline of bbc.com
Produces our random number....
These steps can be verified independently to produce the same result. The headline was taken from bbc.com at exactly 2 PM Eastern Time
1) Go to http://www.random.org/integers/
2) Switch to Advanced Mode
3) Configure to look like this:
4) The randomization string will be the current headline of bbc.com
Produces our random number....
These steps can be verified independently to produce the same result. The headline was taken from bbc.com at exactly 2 PM Eastern Time
Jump to: