Topic: Remote control your rigs in long distance (Read 418 times)
Why won't all countries start using metric systems? Sometimes, miles and kilometers make us make significant mistakes that harm us.
Some of the popular watchdogs that we support are:
- ANPIX USB WatchDog
- domybest USB Watchdog
- ALLOYSEED USB Watchdog
- Open-dev USB Watchdogs
This is what I use. Once you set them up you can remotely restart your rigs from anywhere in the world using an app on your phone. They work by using a relay to power on/off the motherboard using the switch inputs.
https://www.ebay.com/itm/WIFI-APP-USB-WatchDog-For-Mining-Miner-Rig-Crash-Auto-Recover-Reboot-Gaming-New/142872765557?hash=item2143e16475:g:5UkAAOSwO0Ra8Bms
I also recommend using a Linux OS mining operating system. These will allow you to remotely adjust OC settings, change mining pools and remotely monitor. I use Simple Mining OS, there is also Hive OS and HashR8. All are great for running farms with multiple rigs.
https://www.ebay.com/itm/WIFI-APP-USB-WatchDog-For-Mining-Miner-Rig-Crash-Auto-Recover-Reboot-Gaming-New/142872765557?hash=item2143e16475:g:5UkAAOSwO0Ra8Bms
I also recommend using a Linux OS mining operating system. These will allow you to remotely adjust OC settings, change mining pools and remotely monitor. I use Simple Mining OS, there is also Hive OS and HashR8. All are great for running farms with multiple rigs.
Hello,
I can give you a beginner setup guide if needed, for rebooting there's a special hardware with automatically connected to rig monitoring to reboot them.
https://minermonitoring.com/
I can give you a beginner setup guide if needed, for rebooting there's a special hardware with automatically connected to rig monitoring to reboot them.
https://minermonitoring.com/
We use anydesk instead of teamviewer, need less resources, no limitation in time if i connect to much to some computers, and it is easier to use.
I use it with Awesomeminer, right click on miner and connect (make my own rule). Don´t use RDP, only with strong PROTECTION, we had last month 2 attacks over Awesomeminer Ports, our luck RDP is deactivate on all machines, but the attackers tried to connect.
Nice thanks for this
this is what i looking for.
I use it with Awesomeminer, right click on miner and connect (make my own rule). Don´t use RDP, only with strong PROTECTION, we had last month 2 attacks over Awesomeminer Ports, our luck RDP is deactivate on all machines, but the attackers tried to connect.
I use this to remotely reboot pwr on/off my rigs
https://www.aliexpress.com/item/32641809240.html?spm=a2g0s.9042311.0.0.27424c4duNVoA1
You can install a software that comes with the relay on a local PC with Awesome Miner, my mining farm is like 200 km away from my home. I only go there for cleaning and repair, last time was like 6 months ago
https://www.aliexpress.com/item/32641809240.html?spm=a2g0s.9042311.0.0.27424c4duNVoA1
You can install a software that comes with the relay on a local PC with Awesome Miner, my mining farm is like 200 km away from my home. I only go there for cleaning and repair, last time was like 6 months ago
Nice thanks for this
this is what i looking for. 
Windows Remote Desktop and Teamviewer usually won't load if you got some system hang. For some reason the way the AMD drivers were programmed were that during some crashes, if you try and use the computer normally, all is well. However you can't mine on that GPU. If you try and do a reboot, it for some reason freezes then. You can't log into Teamviewer or Remote Desktop anymore. Hence on some crashes where 5 GPUs out of 6 were still mining, I just left it.
I've been mining since 2013 or so and never had these issues back in the litecoin GPU days of 2013-2014. Those older AMD 15.12 drivers were rock solid stable. Basically never crashed for 1 month, probably used 2x the power even. The issues I think started with Windows 10 for me. Also combined with the buggy AMD drivers released after 2017 wasn't a good combo. Especially their Wattman tool which I could never get to work correct.
Hence this keep this in mind. For some it works but for me it was a big headache to make it long distance.
Great tips for GPU miners there, im using Asics so will there be the same problem? I've been mining since 2013 or so and never had these issues back in the litecoin GPU days of 2013-2014. Those older AMD 15.12 drivers were rock solid stable. Basically never crashed for 1 month, probably used 2x the power even. The issues I think started with Windows 10 for me. Also combined with the buggy AMD drivers released after 2017 wasn't a good combo. Especially their Wattman tool which I could never get to work correct.
Hence this keep this in mind. For some it works but for me it was a big headache to make it long distance.
ASICs are pretty bullet proof and they require very little attention actually. You just need to make sure they are well ventilated so they don't over heat and you should be good to go.
Only maintaince I did on my ASICs were cleaning the fans with an air compressor once every 6 months and that was about it. Never had any issues with crashing or anything. Only issues might come up is if you try and undervolt or overclock the frequencies from the stock settings, you might get hardware errors but won't result in a complete crash, just won't be efficient with hardware errors.
Windows Remote Desktop and Teamviewer usually won't load if you got some system hang. For some reason the way the AMD drivers were programmed were that during some crashes, if you try and use the computer normally, all is well. However you can't mine on that GPU. If you try and do a reboot, it for some reason freezes then. You can't log into Teamviewer or Remote Desktop anymore. Hence on some crashes where 5 GPUs out of 6 were still mining, I just left it.
I've been mining since 2013 or so and never had these issues back in the litecoin GPU days of 2013-2014. Those older AMD 15.12 drivers were rock solid stable. Basically never crashed for 1 month, probably used 2x the power even. The issues I think started with Windows 10 for me. Also combined with the buggy AMD drivers released after 2017 wasn't a good combo. Especially their Wattman tool which I could never get to work correct.
Hence this keep this in mind. For some it works but for me it was a big headache to make it long distance.
Great tips for GPU miners there, im using Asics so will there be the same problem? I've been mining since 2013 or so and never had these issues back in the litecoin GPU days of 2013-2014. Those older AMD 15.12 drivers were rock solid stable. Basically never crashed for 1 month, probably used 2x the power even. The issues I think started with Windows 10 for me. Also combined with the buggy AMD drivers released after 2017 wasn't a good combo. Especially their Wattman tool which I could never get to work correct.
Hence this keep this in mind. For some it works but for me it was a big headache to make it long distance.
Windows Remote Desktop and Teamviewer usually won't load if you got some system hang. For some reason the way the AMD drivers were programmed were that during some crashes, if you try and use the computer normally, all is well. However you can't mine on that GPU. If you try and do a reboot, it for some reason freezes then. You can't log into Teamviewer or Remote Desktop anymore. Hence on some crashes where 5 GPUs out of 6 were still mining, I just left it.
I've been mining since 2013 or so and never had these issues back in the litecoin GPU days of 2013-2014. Those older AMD 15.12 drivers were rock solid stable. Basically never crashed for 1 month, probably used 2x the power even. The issues I think started with Windows 10 for me. Also combined with the buggy AMD drivers released after 2017 wasn't a good combo. Especially their Wattman tool which I could never get to work correct.
Hence this keep this in mind. For some it works but for me it was a big headache to make it long distance.
I've been mining since 2013 or so and never had these issues back in the litecoin GPU days of 2013-2014. Those older AMD 15.12 drivers were rock solid stable. Basically never crashed for 1 month, probably used 2x the power even. The issues I think started with Windows 10 for me. Also combined with the buggy AMD drivers released after 2017 wasn't a good combo. Especially their Wattman tool which I could never get to work correct.
Hence this keep this in mind. For some it works but for me it was a big headache to make it long distance.
I had same issue before like you . Here's what I did : I started watching tutorials about how to configure RDP ( Remote Desktop Protocol ) . You can do the same . It is very powerful tool from windows
Will look into deeper softwares and protocols, thanks for the idea ¬.¬
I use this to remotely reboot pwr on/off my rigs
https://www.aliexpress.com/item/32641809240.html?spm=a2g0s.9042311.0.0.27424c4duNVoA1
You can install a software that comes with the relay on a local PC with Awesome Miner, my mining farm is like 200 km away from my home. I only go there for cleaning and repair, last time was like 6 months ago
https://www.aliexpress.com/item/32641809240.html?spm=a2g0s.9042311.0.0.27424c4duNVoA1
You can install a software that comes with the relay on a local PC with Awesome Miner, my mining farm is like 200 km away from my home. I only go there for cleaning and repair, last time was like 6 months ago
Planned to use Asics as that it could be more profitable than gpus and less headache :/
if you plan to do that with gpu's forget, asics on the other hand is setup and forget.
Yes he is correct. I had some remote ASICs and remote GPUs before in various locations and GPU mining rigs were a huge headache.
Almost everyday or every second day there was some crash. And 50% of the time I was able to do a reboot remotely and everything would hash fine, and 50% of the time, it just lost connection and nothing. Needed a hard reboot which wasn't possible. Had to drive there myself and fix it in person.
I think the most I got was maybe 5 days without issues however eventually some GPU would get hardware errors, next day it would stop mining and day after it would stop all together. And logging in remotely would work however when you do an soft reboot, it would hang most of the time.
Sure there was products which could do a hard reboot remotely but I never got into that because the prices of ETH started to crash and I just called it quits. ASICs on the other hard were mostly plug and play. Never had to login to them, just looked at the pool stats.
if you plan to do that with gpu's forget, asics on the other hand is setup and forget.
Started a new topic about the fluids itself, planning for a two-stage cooling to minimize the space and cost itself.
Gigabyte and 3M novec for sure.
Gigabyte and 3M novec for sure.
Great stuff!
Thinking about team viewer too, but the problem is the battery life of the pc/laptop. Maybe i need to go back and forth for every 3 days if for an average, with immersion i dont think i will need to take care of that much stuff.
Trying to use what Gigabyte use, the fluid that evaporates
*anyone know where to buy? *
Thinking about team viewer too, but the problem is the battery life of the pc/laptop. Maybe i need to go back and forth for every 3 days if for an average, with immersion i dont think i will need to take care of that much stuff.
Trying to use what Gigabyte use, the fluid that evaporates
*anyone know where to buy? *
Does kinda depend what your rigs are. Smos OS (or similar) and smartplugs (configure MB to reboot on power) are great for a few GPU-style rigs, but if you're taking asics then the local network PC is a winner for sure...
Ok, thanks
, but the problem is the battery life of the pc/laptop. Maybe i need to go back and forth for every 3 days if for an average,
What batteries? I assume you have electricity in the farm!, simply plug in the pc and it will be on forever, make sure you modify the motherboard settings to power on automatically if power cuts and come back.
Quote
*anyone know where to buy? *
Maybe start a different topic for that?
Great stuff!
Thinking about team viewer too, but the problem is the battery life of the pc/laptop. Maybe i need to go back and forth for every 3 days if for an average, with immersion i dont think i will need to take care of that much stuff.
Trying to use what Gigabyte use, the fluid that evaporates
*anyone know where to buy? *
Thinking about team viewer too, but the problem is the battery life of the pc/laptop. Maybe i need to go back and forth for every 3 days if for an average, with immersion i dont think i will need to take care of that much stuff.
Trying to use what Gigabyte use, the fluid that evaporates
*anyone know where to buy? *
here is a link for the pc to use on site.
this pc plugs in and will run the shit out of 100 miners easy
https://www.ebay.com/itm/Lenovo-M73-Tiny-Micro-Mini-PC-i5-4590T-Quad-8G-RAM-256GB-SSD-Win10-Pro-Wifi/223991489980?
dirt cheap monitor
https://www.ebay.com/itm/Dell-UltraSharp-17-Monitor-Desktop-Computer-PC-LCD-Grade-B-Lot-s-available/254311179577?
about 250 total.
both the monitor and the pc can run 24/7/365 no issues
used lenevo tiny models are great for a lot of shit.
the one I linked is over kill. but it will work well
Great stuff!
Thinking about team viewer too, but the problem is the battery life of the pc/laptop. Maybe i need to go back and forth for every 3 days if for an average, with immersion i dont think i will need to take care of that much stuff.
Trying to use what Gigabyte use, the fluid that evaporates
*anyone know where to buy? *
Thinking about team viewer too, but the problem is the battery life of the pc/laptop. Maybe i need to go back and forth for every 3 days if for an average, with immersion i dont think i will need to take care of that much stuff.
Trying to use what Gigabyte use, the fluid that evaporates
*anyone know where to buy? *
I run three accounts with about 90 miners.
I am in Howell NJ
The miners are in Clifton NJ about 100 kilometers or 64 miles each way.
I use team viewer and can look at every one.
I can boot every one.
I can clock every one
I can change pools on every one.
I did not set up hard boot 🥾 power reset as you need a lot of expensive pdus.
The warehouse is maintained with 7 days and around 13 hours a day. By workers.
Every miner has a number so if my team viewer does not work I can call ware house and tell them turn miner 201 off and turn it back on.
With this setup I have better then 98% up time.
I have not checked miners in person since Feb 7 due to covid-19 shut down.
Of 90 miners 1 L3+ and 1 s9 are dead. plus one board on my t17+ works like shit.
not bad with more then 80 days of no hands on work.
I am in Howell NJ
The miners are in Clifton NJ about 100 kilometers or 64 miles each way.
I use team viewer and can look at every one.
I can boot every one.
I can clock every one
I can change pools on every one.
I did not set up hard boot 🥾 power reset as you need a lot of expensive pdus.
The warehouse is maintained with 7 days and around 13 hours a day. By workers.
Every miner has a number so if my team viewer does not work I can call ware house and tell them turn miner 201 off and turn it back on.
With this setup I have better then 98% up time.
I have not checked miners in person since Feb 7 due to covid-19 shut down.
Of 90 miners 1 L3+ and 1 s9 are dead. plus one board on my t17+ works like shit.
not bad with more then 80 days of no hands on work.
Jump to: