There is a plagiarism copy and paste here ! The User
sirdikk copied the whole Thread from Gminer and just insert a link to Website.
plagiarism thread :
GMiner v2.73: Download and configure - Quick start - FeaturesArchived Thread from
sirdikk :
https://archive.fo/ZQtbWPlease ban the Account
sirdikk for plagiarism and use a Work from others for his one !
plagiarism copyGMiner was created by a Russian group of specialists in the field of high performance computing and cryptography.
First version GMiner was released on September 21, 2018 and has been warmly received by users.
Thanks to its unique design and stability, in just six months, the miner became the favorite of Equihash algorithms.
The miner is focused on NVIDIA and AMD platforms and supports the most popular algorithms such as: Ethash, ProgPoW, KAWPOW, Equihash, CuckooCycle.
GMiner maintains a leading position in the mining of such coins as Beam, Grin, Cortex, Bitcoin Gold.
In 2020, the miner added support for Ethash, ProgPoW and KAWPOW algorithms with high performance relative to competitors.
The development team never stops at what has been achieved and achieves maximum performance of algorithms with minimum power consumption, these are the qualities that distinguish GMiner from competitors and win the hearts of users.
Original Thread and Post from Zminer777GMiner was created by a Russian group of specialists in the field of high performance computing and cryptography.
The first version of GMiner was released on September 21, 2018 and was received quite warmly among users.
Thanks to its unique developments and stability, in just six months, the miner became a favorite on the Equihash algorithms.
The miner is focused on NVIDIA and AMD platforms and supports most popular algorithms such as: Ethash, ProgPoW, KAWPOW, Equihash, CuckooCycle.
GMiner maintains a leading position in the mining of such coins as Beam, Grin, Cortex, Bitcoin Gold.
In 2020, the miner added support for Ethash, ProgPoW and KAWPOW algorithms with high performance relative to competitors.
The development team never stops at what has been achieved and achieves the maximum performance of the algorithms with the minimum power consumption, it is these qualities that distinguish GMiner from the competitors and win the hearts of users.
Source :
GMiner v2.72 Ethash(LHR unlock)/KAWPOW/Equihash/CuckooCycle
And another plagiarism (copy/paste) hereAPMinerTool: Download and How to Use
What is APMinerTool?
APMinerTool - is a mining farm monitoring software that can scan multiple LAN IP segments at the same time and can monitor ASIC operation status in batch. The software supports alert settings, IP ranges, firmware, etc.
Features
Batch monitoring of the state of the ASIC.
Mass configuration of devices (in batches).
Firmware update (in batches).
Batch restart.
Supports simultaneous scanning of multiple IP segment miners on the local network.
How to setup APMinerTool
Step 1 - Download the program
Download the program from the official source - antpool website. apminertool_download
Extract the archive with the program to any folder. apminertool_zip
Double click on the file APMinerTool.exe to open the software. apminertool_files
Step 2 - Run IP Scanner
First thing you need to do is find the IP of your ASIC. This can be done in this program, or you can use a lighter utility - IP Reporter.
Click "Start Scan" and then press and hold the "IP report" button on each ASIC for 3-5 seconds to start adding devices.
After you connected the device to the network and power supply, the IP obtained during the device setup is in DHCP mode and the IP address is not fixed. If you have many devices, you can set fixed IP addresses in batch mode for easy management.
Example: the router assigns a mode DHCP: 101-254. Just click the "start scan" button.
The scan will take about 30 seconds. When it is complete, a window should appear informing you that the process is complete: apminertool_finished
The utility will display information about what it found. apminertool_list
Enter the static IP address you want to set for the miner in the next fill IP field:
apminertool_set_ip
Step 3 - Configure the utility
Enter the pool address and password in batch mode in the "Pool Configuration" section.
apminertool_pool_address
In the "Worker" field, select the name of the worker (for tracking statistics. The name can be anything. For example, "Antminer"). In the field on the right, select the type of coin to be mined.
apminertool_worker
Check out the list of available devices. The important part here is that you can see which devices are out of order due to the high temperature.
apminertool_list
Firmware
You can find the original ASIC firmware on the Bitmain website.
Alternatives
Are there alternatives? Yes, for example:
IP Reporter
BTC Tools
Troubleshooting
Does not work?
Follow the five-step ASIC troubleshooting guide:
Check your network or internet connection.
Check or reset your router or switch.
Check miner’s network configuration and IP conflicts.
Reboot the miner.
Repair control board or reset to factory settings.
Does the software not see the ASIC?
In such cases, resetting the settings on the miner and in the router helps.
How do I restore factory settings? If you need to restore factory settings for a specific device, you can click the “Reset” button, a pop-up window will appear with a hint, click “Ok”.
apminertool_reset
Versions
1.0.11
Conclusions
This software does an excellent job with its functions. There is a version for mobile devices - IOS and android.
apminertool_app
To use, you need to scan the QR code or use the direct download link.
Click the “+” sign in the middle or the “+” sign in the upper right corner to enter the IP segment that the miner has access to.
apminertool_new
If you are mining on video cards, it is recommended to use PhoenixMiner
https_://minerdownload.brizy.site/
On the Website is a download link that points to :
https://filedriving.com/Minerdownload
Virustotal :
https://www.virustotal.com/gui/url/563158caec6eac8d172895f7d13a9c7d0fd65336e05fd7cb3700ecaec84ae698?nocache=1The download link is marked as Phishing and maliciousOriginal TextWhat is APMinerTool?
APMinerTool - is a mining farm monitoring software that can scan multiple LAN IP segments at the same time and can monitor ASIC operation status in batch. The software supports alert settings, IP ranges, firmware, etc.
Features
Batch monitoring of the state of the ASIC.
Mass configuration of devices (in batches).
Firmware update (in batches).
Batch restart.
Supports simultaneous scanning of multiple IP segment miners on the local network.
How to setup APMinerTool
Step 1 - Download the program
Download the program from the official source - antpool website.
Extract the archive with the program to any folder.
Double click on the file APMinerTool.exe to open the software.
Step 2 - Run IP Scanner
First thing you need to do is find the IP of your ASIC. This can be done in this program, or you can use a lighter utility - IP Reporter.
Click "Start Scan" and then press and hold the "IP report" button on each ASIC for 3-5 seconds to start adding devices.
After you connected the device to the network and power supply, the IP obtained during the device setup is in DHCP mode and the IP address is not fixed. If you have many devices, you can set fixed IP addresses in batch mode for easy management.
Example: the router assigns a mode DHCP: 101-254. Just click the "start scan" button.
The scan will take about 30 seconds. When it is complete, a window should appear informing you that the process is complete:
The utility will display information about what it found.
Enter the static IP address you want to set for the miner in the next fill IP field:
Step 3 - Configure the utility
Enter the pool address and password in batch mode in the "Pool Configuration" section.
In the "Worker" field, select the name of the worker (for tracking statistics. The name can be anything. For example, "Antminer"). In the field on the right, select the type of coin to be mined.
Check out the list of available devices. The important part here is that you can see which devices are out of order due to the high temperature.
Firmware
You can find the original ASIC firmware on the Bitmain website.
Source :
https://miningsoft.org/en/tools/apminertool/