Pages:
Author

Topic: [REQUESTS] Minimal Electrum builds for Windows - page 9. (Read 47201 times)

legendary
Activity: 1092
Merit: 1016
760930
I can't get Electrum 0.60 or 1.0 to connect to the network on Windows 7 Ultimate SP1 x64.  I have PyCrypto 2.1 (Python 2.7).  I don't know what other information would be useful.

It's the same issue that's been reported before where Electrum can't connect to the network.

Upon launch, I get a window says,
Code:
Please wait...
Addresses generated: 0
Kilobytes received: 0.0

If I close that window, I can get the seed, create a password, and then get to the main window.  However, in the lower left hand corner of the main window, it says "Connecting" then "Not connected."

Switching servers does not help.

I added Electrum to my trusted programs list in Kaspersky Internet Security, but that didn't help either.

Anyone have any ideas on how to fix this?

Hi, we are investigating this issue with 1.0.
0.60 should work if you delete and re-create your wallet file (electrum.dat) -
please could you try?



I tried deleting the wallet file on 0.60, 1.0, and 1.01-c.  It not working on this original computer.

However, I also tried another computer with Windows 7 Home Premium x64, and 1.01-c DID work.  Yay!  

Here's a candidate build (1.01-d), with slightly different connection values configured in interface.py, that you can try on your original computer.
 https://code.google.com/p/win-electrum/downloads/detail?name=elec101d.exe&can=2&q=

Does that work better?

Nice!  That worked for me on my original computer if I deleted the wallet.dat.  Thanks.

Great news Smiley
Remember it's still version 1.01, though - this kind of stuff will only get more intuitive/stable with each new release.
full member
Activity: 150
Merit: 100
I can't get Electrum 0.60 or 1.0 to connect to the network on Windows 7 Ultimate SP1 x64.  I have PyCrypto 2.1 (Python 2.7).  I don't know what other information would be useful.

It's the same issue that's been reported before where Electrum can't connect to the network.

Upon launch, I get a window says,
Code:
Please wait...
Addresses generated: 0
Kilobytes received: 0.0

If I close that window, I can get the seed, create a password, and then get to the main window.  However, in the lower left hand corner of the main window, it says "Connecting" then "Not connected."

Switching servers does not help.

I added Electrum to my trusted programs list in Kaspersky Internet Security, but that didn't help either.

Anyone have any ideas on how to fix this?

Hi, we are investigating this issue with 1.0.
0.60 should work if you delete and re-create your wallet file (electrum.dat) -
please could you try?



I tried deleting the wallet file on 0.60, 1.0, and 1.01-c.  It not working on this original computer.

However, I also tried another computer with Windows 7 Home Premium x64, and 1.01-c DID work.  Yay! 

Here's a candidate build (1.01-d), with slightly different connection values configured in interface.py, that you can try on your original computer.
 https://code.google.com/p/win-electrum/downloads/detail?name=elec101d.exe&can=2&q=

Does that work better?

Nice!  That worked for me on my original computer if I deleted the wallet.dat.  Thanks.
legendary
Activity: 1092
Merit: 1016
760930
I can't get Electrum 0.60 or 1.0 to connect to the network on Windows 7 Ultimate SP1 x64.  I have PyCrypto 2.1 (Python 2.7).  I don't know what other information would be useful.

It's the same issue that's been reported before where Electrum can't connect to the network.

Upon launch, I get a window says,
Code:
Please wait...
Addresses generated: 0
Kilobytes received: 0.0

If I close that window, I can get the seed, create a password, and then get to the main window.  However, in the lower left hand corner of the main window, it says "Connecting" then "Not connected."

Switching servers does not help.

I added Electrum to my trusted programs list in Kaspersky Internet Security, but that didn't help either.

Anyone have any ideas on how to fix this?

Hi, we are investigating this issue with 1.0.
0.60 should work if you delete and re-create your wallet file (electrum.dat) -
please could you try?



I tried deleting the wallet file on 0.60, 1.0, and 1.01-c.  It not working on this original computer.

However, I also tried another computer with Windows 7 Home Premium x64, and 1.01-c DID work.  Yay! 

Here's a candidate build (1.01-d), with slightly different connection values configured in interface.py, that you can try on your original computer.
 https://code.google.com/p/win-electrum/downloads/detail?name=elec101d.exe&can=2&q=

Does that work better?
full member
Activity: 150
Merit: 100
I can't get Electrum 0.60 or 1.0 to connect to the network on Windows 7 Ultimate SP1 x64.  I have PyCrypto 2.1 (Python 2.7).  I don't know what other information would be useful.

It's the same issue that's been reported before where Electrum can't connect to the network.

Upon launch, I get a window says,
Code:
Please wait...
Addresses generated: 0
Kilobytes received: 0.0

If I close that window, I can get the seed, create a password, and then get to the main window.  However, in the lower left hand corner of the main window, it says "Connecting" then "Not connected."

Switching servers does not help.

I added Electrum to my trusted programs list in Kaspersky Internet Security, but that didn't help either.

Anyone have any ideas on how to fix this?

Hi, we are investigating this issue with 1.0.
0.60 should work if you delete and re-create your wallet file (electrum.dat) -
please could you try?



I tried deleting the wallet file on 0.60, 1.0, and 1.01-c.  It not working on this original computer.

However, I also tried another computer with Windows 7 Home Premium x64, and 1.01-c DID work.  Yay! 
hero member
Activity: 868
Merit: 1000
A new Windows build (1.01-c) is now available. It should fix the connection issue for new wallets. Could you try it?

Just downloaded and installed 1.01-c

Seems to be working, am connected to uncle-enzo.info

Great job,

Thanks
legendary
Activity: 1092
Merit: 1016
760930
A new Windows build (1.01-c) is now available. It should fix the connection issue for new wallets. Could you try it?
legendary
Activity: 1092
Merit: 1016
760930
I can't get Electrum 0.60 or 1.0 to connect to the network on Windows 7 Ultimate SP1 x64.  I have PyCrypto 2.1 (Python 2.7).  I don't know what other information would be useful.

It's the same issue that's been reported before where Electrum can't connect to the network.

Upon launch, I get a window says,
Code:
Please wait...
Addresses generated: 0
Kilobytes received: 0.0

If I close that window, I can get the seed, create a password, and then get to the main window.  However, in the lower left hand corner of the main window, it says "Connecting" then "Not connected."

Switching servers does not help.

I added Electrum to my trusted programs list in Kaspersky Internet Security, but that didn't help either.

Anyone have any ideas on how to fix this?

Hi, we are investigating this issue with 1.0.
0.60 should work if you delete and re-create your wallet file (electrum.dat) -
please could you try?

full member
Activity: 150
Merit: 100
I can't get Electrum 0.60 or 1.0 to connect to the network on Windows 7 Ultimate SP1 x64.  I have PyCrypto 2.1 (Python 2.7).  I don't know what other information would be useful.

It's the same issue that's been reported before where Electrum can't connect to the network.

Upon launch, I get a window says,
Code:
Please wait...
Addresses generated: 0
Kilobytes received: 0.0

If I close that window, I can get the seed, create a password, and then get to the main window.  However, in the lower left hand corner of the main window, it says "Connecting" then "Not connected."

Switching servers does not help.

I added Electrum to my trusted programs list in Kaspersky Internet Security, but that didn't help either.

Anyone have any ideas on how to fix this?
legendary
Activity: 1092
Merit: 1016
760930
Windows Builds for 1.0 are now available!

Note that there are few apparent changes in this release.
See this post for more info.

Thanks to all contributors and donators for their support!


http://dre.redmartian.org/elecwin.htm
legendary
Activity: 1092
Merit: 1016
760930
flatfly: Could you eventually make a portable version of the new electrum client?

I still don't have a Windows computer, so didn't plan to do that before September,
but as you're one of my top donators, I will see if I can borrow my dad's
laptop, secure it properly, and make an early 1.0 portable build Smiley
Thanks a bunch but you dont need to hurry. I prefer a stable version. Smiley

Sure, me too Smiley 
legendary
Activity: 1014
Merit: 1001
flatfly: Could you eventually make a portable version of the new electrum client?

I still don't have a Windows computer, so didn't plan to do that before September,
but as you're one of my top donators, I will see if I can borrow my dad's
laptop, secure it properly, and make an early 1.0 portable build Smiley
Thanks a bunch but you dont need to hurry. I prefer a stable version. Smiley
legendary
Activity: 1092
Merit: 1016
760930
flatfly: Could you eventually make a portable version of the new electrum client?

I still don't have a Windows computer, so didn't plan to do that before September,
but as you're one of my top donators, I will see if I can borrow my dad's
laptop, secure it properly, and make an early 1.0 portable build Smiley
legendary
Activity: 1092
Merit: 1016
760930
Overall I like the client and interface and performance way better than multibit and satoshi client.  There are a couple things that need to be fixed however.  The transaction order for pending transactions is not correct, which was extremely irritating when I was playing satoshidice.  I would send a payment, and receive one back from satoshidice, and not be able to tell if I had won because the transactions would not appear at the top of the history list.  They would appear in some random spot farther down.  

Also, there is a problem with being able to copy addresses on the history screen and identify them on the contact list.  For example, I wanted to send my friend a few bitcoins to his phone from my laptop, so I had him send me .01 bitcoins so I could get an address to send back to his phone.  The .01 arrived, and I could see it in my history list, but by right clicking it I could not copy his address, as i can with the satoshi client.  So I went to the contacts tab, but it was just a big wall of addresses because I had not labeled anything.  This took me a while to figure out and is a usability problem.  Same thing when I click on receive, its just a big wall of addresses with no easy way to tell which ones haven't been used before or generate a new address.

One more thing is that when it doesnt connect at startup and I go to select a different server, it doesnt try to connect immediately unless i restart the client.

Hi, I agree with your feedback. Hopefully these issues will be addressed in the near future.

Regarding copying an address from the history view, you can already do so, by first editing the
address field, then right-clicking on the address. I admit this should be made more intuitive though.

Also, if you enable expert mode (in the settings), you get a new column with individual address balances in the "contacts" & "receive" tabs.
legendary
Activity: 1014
Merit: 1001
flatfly: Could you eventually make a portable version of the new electrum client?
sr. member
Activity: 257
Merit: 250
Not trusting third parties with my private keys
Overall I like the client and interface and performance way better than multibit and satoshi client.  There are a couple things that need to be fixed however.  The transaction order for pending transactions is not correct, which was extremely irritating when I was playing satoshidice.  I would send a payment, and receive one back from satoshidice, and not be able to tell if I had won because the transactions would not appear at the top of the history list.  They would appear in some random spot farther down.  

Also, there is a problem with being able to copy addresses on the history screen and identify them on the contact list.  For example, I wanted to send my friend a few bitcoins to his phone from my laptop, so I had him send me .01 bitcoins so I could get an address to send back to his phone.  The .01 arrived, and I could see it in my history list, but by right clicking it I could not copy his address, as i can with the satoshi client.  So I went to the contacts tab, but it was just a big wall of addresses because I had not labeled anything.  This took me a while to figure out and is a usability problem.  Same thing when I click on receive, its just a big wall of addresses with no easy way to tell which ones haven't been used before or generate a new address.

One more thing is that when it doesnt connect at startup and I go to select a different server, it doesnt try to connect immediately unless i restart the client.
legendary
Activity: 1092
Merit: 1016
760930
Hi, I have no Windows system available for now (my computer died on me), but
hopefully I will get a new PC in the first week of September and then I will be able to
make new builds.

That said, if you do have some time to make Windows builds as well, go ahead Smiley

I think it would be nice to eventually have several people working on the binary creation
and distribution, documenting the build process so it is easily repeatable by any user.    

What about having a amazon windows instance?

Thanks for the suggestion. I'm not too familiar with amazon's offering, but will check it out.
hero member
Activity: 602
Merit: 513
GLBSE Support [email protected]
Hi, I have no Windows system available for now (my computer died on me), but
hopefully I will get a new PC in the first week of September and then I will be able to
make new builds.

That said, if you do have some time to make Windows builds as well, go ahead Smiley

I think it would be nice to eventually have several people working on the binary creation
and distribution, documenting the build process so it is easily repeatable by any user.    

What about having a amazon windows instance?
hero member
Activity: 938
Merit: 1000
Hi, I have no Windows system available for now (my computer died on me), but
hopefully I will get a new PC in the first week of September and then I will be able to
make new builds.

That said, if you do have some time to make Windows builds as well, go ahead Smiley

I think it would be nice to eventually have several people working on the binary creation
and distribution, documenting the build process so it is easily repeatable by any user.    

That would be my end-game too, there are already build scripts for OSX and a PIP install for Linux. I will see if I can get a python dev env on Windows setup so I can try building a Windows binary.
legendary
Activity: 1092
Merit: 1016
760930
Hi, I have no Windows system available for now (my computer died on me), but
hopefully I will get a new PC in the first week of September and then I will be able to
make new builds.

That said, if you do have some time to make Windows builds as well, go ahead Smiley

I think it would be nice to eventually have several people working on the binary creation
and distribution, documenting the build process so it is easily repeatable by any user.    
hero member
Activity: 938
Merit: 1000
Are you still working on brining out new versions Flatfly? We are about to release a new version and I would love there to be a easy to download windows version of it to. If not I would like to know so I can try to build an .exe myself :}
Pages:
Jump to: