i think u need to use cgminer-skein
Guys do u still get POS Reward after encrypting the wallet?
Topic: Royal Empire Coin [REC] - Looking For Mining Pools and Miners - page 13. (Read 17196 times)
Pool is ready for testing, I still have some work to do but if you wish to test....
https://hobbyistpool.ddns.net/royalempire
1) Create account.
2) Create workers.
3) Point miners to stratum+tcp://hobbyistpool.ddns.net:5341 -u Weblogin.WorkerName -p WorkerPassword
Edit: First block found height: 1675 Time: 08/28/2017 13:59:32
https://hobbyistpool.ddns.net/royalempire
1) Create account.
2) Create workers.
3) Point miners to stratum+tcp://hobbyistpool.ddns.net:5341 -u Weblogin.WorkerName -p WorkerPassword
Edit: First block found height: 1675 Time: 08/28/2017 13:59:32
All I'm getting are rejected shares
"Rejected dfcfdec7 Diff 1.144/1.000 GPU 0 (low difficulty share of 4.219?reject"
My sgminer bat looks like this:
Code:
sgminer.exe -k skein --no-submit-stale -o stratum+tcp://hobbyistpool.ddns.net:5341 -u resar.1 -p x
Any ideas where I'm going wrong?
How to sync the wallet?
my wallet in status Not synchronized
my wallet in status Not synchronized
addnode=154.16.7.194 in the .conf File
dankeschon
addnode=154.16.7.194 in the .conf File
thanks bro!
How to sync the wallet?
my wallet in status Not synchronized
my wallet in status Not synchronized
addnode=154.16.7.194 in the .conf File
How to sync the wallet?
my wallet in status Not synchronized
my wallet in status Not synchronized
waiting for bounty campaign information
https://hobbyistpool.ddns.net/royalempire
Pool Hash Rate 286.897 KH/s
http://steamoctanepool.com
Pool Hash Rate 5 Gh/s
Pool Hash Rate 286.897 KH/s
http://steamoctanepool.com
Pool Hash Rate 5 Gh/s
Pool stats are a bit off as MPOS doesn't support Skein "Out-of-the-Box"
Share submission, prop calculation and payout are unaffected but hashrate, of expected shares, est adv time of block exc.. are going to be off.
I'm looking for a fix.
what a seek amount were mined
2099 POW 3 Mins 3 835289.89291496 3082.22499394 931 00000000000deb35c6fd184c1a2f4cfe1c9e7c14534bfeca048536b89cddaf2c
2099 POW 3 Mins 3 835289.89291496 3082.22499394 931 00000000000deb35c6fd184c1a2f4cfe1c9e7c14534bfeca048536b89cddaf2c
Mined was 50, the total block value was large.
Code:
Coin: Royal Empire Coin
Blockhash: 00000000000deb35c6fd184c1a2f4cfe1c9e7c14534bfeca048536b89cddaf2c
Confirmations: 3
Height: 2099
Time: 2017-08-29 03:50:19
Difficulty: 3082.22499394
Bits: 1b154322
Nonce: 4054568734
Version: 7
Size: 931 bytes
Flags: proof-of-work stake-modifier
Previous Hash: 000000000001ead8e406b440bfb1a2bb5bb62f4095a0371f1444264283226b90
Next Hash: 00000000000966f63cb85edcc8efa5dd11014c571b55d0b26ae51d5446022995
Merkle Root: 172296d4ce2379596962336b7ccdc6edc449c8edb1c1797d8757a9541172792b
Transactions: 3
Transaction Hash Size Value From To (amount)
d50cf12faad16f0d1b044dfabb7c5f4d2e15dcabdef6d942f9114b9df65d9f67 95 50.01001 Generation rBF3veSr9i1nNKXDFcGkGtHxWJhRL2uYwz (50.01001)
8a57fa2e61a9075e6efb0114704ce027e03319923be376447b427d21d25cc3ba 230 835211.83 rTD65LUjqevaodoCbGiJjvTeyuYvYbMPNR (805211.83)
rET2Yg86Y1S5nciXcT8eeGjcb4qujGq6GB (30000)
44e302038fa31261160dee4ee73b1ba963ed95ebd228628dc4d506cfadecb36a 524 28.05290496 rP33pGx7vhtKnqx9DF8DGGzEcJrRk7BKaN (26.92210935)
r71GgM48cq5kzc3UBjszEJcZNPJpUwrJZM (1.13079561)
https://hobbyistpool.ddns.net/royalempire
Pool Hash Rate 286.897 KH/s
http://steamoctanepool.com
Pool Hash Rate 5 Gh/s
Pool Hash Rate 286.897 KH/s
http://steamoctanepool.com
Pool Hash Rate 5 Gh/s
I want mining but Total Maximum Coin Supply: 28,888,800 and Premine: 4,333,320
any promotion or bounty sir? I think premine is big ammount
any promotion or bounty sir? I think premine is big ammount
Come on guys join the pool and increase the hashrate , solo is no longer feasible 
Right, With the coins diff adjustments, it's all over the place. Solo is going to be rough.
https://hobbyistpool.ddns.net/royalempire has 14 workers and 93 blocks today
http://steamoctanepool.com has 7 workers with 1 block solve today (needs hash, point here if you can to balance out the hash)
My advise, set your miners to have a backup pool. I don't mind if you don't use my pool but set it as a backup.
what a seek amount were mined
2099 POW 3 Mins 3 835289.89291496 3082.22499394 931 00000000000deb35c6fd184c1a2f4cfe1c9e7c14534bfeca048536b89cddaf2c
2099 POW 3 Mins 3 835289.89291496 3082.22499394 931 00000000000deb35c6fd184c1a2f4cfe1c9e7c14534bfeca048536b89cddaf2c
Come on guys join the pool and increase the hashrate , solo is no longer feasible
There is no miner right now, I will join
First block solved at steamoctanepool.com. Congrats and welcome.
There is no miner right now, I will join
REC has been added to SteamOctanePool.com!
Use your wallet address as your username. and c=REC as your password.
Sample Config Below
-a skein -o stratum+tcp://steamoctanepool.com:4933 -u rFsPkKp6KXGZvHGoqxMBgCZCG3oyoKxxCP -p c=REC
Bounty/Donation address: rFsPkKp6KXGZvHGoqxMBgCZCG3oyoKxxCP
Use your wallet address as your username. and c=REC as your password.
Sample Config Below
-a skein -o stratum+tcp://steamoctanepool.com:4933 -u rFsPkKp6KXGZvHGoqxMBgCZCG3oyoKxxCP -p c=REC
Bounty/Donation address: rFsPkKp6KXGZvHGoqxMBgCZCG3oyoKxxCP
Pool is ready for testing, I still have some work to do but if you wish to test....
https://hobbyistpool.ddns.net/royalempire
1) Create account.
2) Create workers.
3) Point miners to stratum+tcp://hobbyistpool.ddns.net:5341 -u Weblogin.WorkerName -p WorkerPassword
Edit: First block found height: 1675 Time: 08/28/2017 13:59:32
https://hobbyistpool.ddns.net/royalempire
1) Create account.
2) Create workers.
3) Point miners to stratum+tcp://hobbyistpool.ddns.net:5341 -u Weblogin.WorkerName -p WorkerPassword
Edit: First block found height: 1675 Time: 08/28/2017 13:59:32
how did you get it to compile? even after std::unique_ptr to auto_ptr change it complains about libdb (which exists for other similar forks running already)
libdb or leveldb? If leveldb, try the following... (I should have kept better notes)
chmod 755 src/leveldb/build_detect_platform
cd src/leveldb make libleveldb.a libmemenv.a
yes you are right it was leveldb.. i guess i'm too used to get complaints about libdb.
on a side note how did you disable staking? staking=0/false etc does not work.
I resorted to set reservebalance 1000000000 as a workaround
I used staking=0 conf below... (looking at the source now, maybe staking= is not in there. I added it blindly with enableaccounts)
Code:
listen=1
server=1
daemon=1
enableaccounts=1
staking=0
maxconnections=250
rpcuser=youruser
rpcpassword=yourpassword
port=20028
rpcport=20029
rpcconnect=127.0.0.1
rpcallowip=127.0.0.1
rpcallowip=PoolIP
addnode=192.168.1.88
addnode=154.16.7.194
addnode=112.198.98.114
Regalcoin.co is name REC coin. What shell we do.
Pool is ready for testing, I still have some work to do but if you wish to test....
https://hobbyistpool.ddns.net/royalempire
1) Create account.
2) Create workers.
3) Point miners to stratum+tcp://hobbyistpool.ddns.net:5341 -u Weblogin.WorkerName -p WorkerPassword
Edit: First block found height: 1675 Time: 08/28/2017 13:59:32
https://hobbyistpool.ddns.net/royalempire
1) Create account.
2) Create workers.
3) Point miners to stratum+tcp://hobbyistpool.ddns.net:5341 -u Weblogin.WorkerName -p WorkerPassword
Edit: First block found height: 1675 Time: 08/28/2017 13:59:32
how did you get it to compile? even after std::unique_ptr to auto_ptr change it complains about libdb (which exists for other similar forks running already)
libdb or leveldb? If leveldb, try the following... (I should have kept better notes)
chmod 755 src/leveldb/build_detect_platform
cd src/leveldb make libleveldb.a libmemenv.a
yes you are right it was leveldb.. i guess i'm too used to get complaints about libdb.
on a side note how did you disable staking? staking=0/false etc does not work.
I resorted to set reservebalance 1000000000 as a workaround
Jump to: