s9 > batch 16 and Auto-Tune Issues - page 3.

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

The Kernel Log from s9 b17 after finishing its's boot checks:

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gf387dab-dirty (lzq@armdev01) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #38 SMP PREEMPT Fri Jun 17 20:02:51 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 27800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 258048
[    0.000000] free_area_init_node: node 0, pgdat c06e4600, node_mem_map e6fd8000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 496 pages used for memmap
[    0.000000]   HighMem zone: 63488 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256528
[    0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=/dev/mtdblock1 rootfstype=jffs2 rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 884528K/1032192K available (4764K kernel code, 271K rwdata, 1816K rodata, 200K init, 257K bss, 147664K reserved, 253952K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06752f8   (6581 kB)
[    0.000000]       .init : 0xc0676000 - 0xc06a8380   ( 201 kB)
[    0.000000]       .data : 0xc06aa000 - 0xc06edd00   ( 272 kB)
[    0.000000]        .bss : 0xc06edd0c - 0xc072e4fc   ( 258 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000301] ps7-ttc #0 at f0006000, irq=43
[    0.000605] Console: colour dummy device 80x30
[    0.000641] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040204] pid_max: default: 32768 minimum: 301
[    0.040412] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.040434] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.042525] CPU: Testing write buffer coherency: ok
[    0.042869] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042929] Setting up static identity map for 0x482448 - 0x4824a0
[    0.043144] L310 cache controller enabled
[    0.043165] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121023] CPU1: Booted secondary processor
[    0.210224] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210355] Brought up 2 CPUs
[    0.210374] SMP: Total of 2 processors activated.
[    0.210382] CPU: All CPU(s) started in SVC mode.
[    0.211039] devtmpfs: initialized
[    0.213416] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214628] regulator-dummy: no parameters
[    0.221873] NET: Registered protocol family 16
[    0.224089] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226379] cpuidle: using governor ladder
[    0.226392] cpuidle: using governor menu
[    0.233760] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235261] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235274] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235380] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.256941] bio: create slab  at 0
[    0.258373] vgaarb: loaded
[    0.259073] SCSI subsystem initialized
[    0.259949] usbcore: registered new interface driver usbfs
[    0.260121] usbcore: registered new interface driver hub
[    0.260496] usbcore: registered new device driver usb
[    0.261023] media: Linux media interface: v0.10
[    0.261213] Linux video capture interface: v2.00
[    0.261453] pps_core: LinuxPPS API ver. 1 registered
[    0.261465] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.261587] PTP clock support registered
[    0.261959] EDAC MC: Ver: 3.0.0
[    0.263013] Advanced Linux Sound Architecture Driver Initialized.
[    0.265839] DMA-API: preallocated 4096 debug entries
[    0.265854] DMA-API: debugging enabled by kernel config
[    0.265934] Switched to clocksource arm_global_timer
[    0.286919] NET: Registered protocol family 2
[    0.287557] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.287652] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.287812] TCP: Hash tables configured (established 8192 bind 8192)
[    0.287873] TCP: reno registered
[    0.287891] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.287944] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.288205] NET: Registered protocol family 1
[    0.288560] RPC: Registered named UNIX socket transport module.
[    0.288572] RPC: Registered udp transport module.
[    0.288580] RPC: Registered tcp transport module.
[    0.288588] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288601] PCI: CLS 0 bytes, default 64
[    0.289028] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291033] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292461] bounce pool size: 64 pages
[    0.293336] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293541] msgmni has been set to 1487
[    0.294002] io scheduler noop registered
[    0.294014] io scheduler deadline registered
[    0.294050] io scheduler cfq registered (default)
[    0.308117] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.308138] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.430891] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.002723] console [ttyPS0] enabled
[    1.007012] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[    1.014638] [drm] Initialized drm 1.1.0 20060810
[    1.031685] brd: module loaded
[    1.041071] loop: module loaded
[    1.050648] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.056479] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.064203] libphy: XEMACPS mii bus: probed
[    1.068742] ------------- phy_id = 0x3625e62
[    1.073490] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.082191] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.088852] ehci-pci: EHCI PCI platform driver
[    1.096091] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.102897] usbcore: registered new interface driver usb-storage
[    1.109783] mousedev: PS/2 mouse device common for all mice
[    1.115866] i2c /dev entries driver
[    1.122759] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.128354] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.134235] Xilinx Zynq CpuIdle Driver started
[    1.139113] sdhci: Secure Digital Host Controller Interface driver
[    1.145204] sdhci: Copyright(c) Pierre Ossman
[    1.149621] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.156376] mmc0: no vqmmc regulator found
[    1.160390] mmc0: no vmmc regulator found
[    1.195953] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.204636] usbcore: registered new interface driver usbhid
[    1.210146] usbhid: USB HID core driver
[    1.214863] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.221159] nand: Micron MT29F2G08ABAEAWP
[    1.225125] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231164] Bad block table found at page 131008, version 0x01
[    1.237557] Bad block table found at page 130944, version 0x01
[    1.243693] 4 ofpart partitions found on MTD device pl353-nand
[    1.249478] Creating 4 MTD partitions on "pl353-nand":
[    1.254562] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.262620] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.269928] 0x00000b000000-0x00000ec00000 : "upgrade-rootfs"
[    1.277015] 0x00000ec00000-0x000010000000 : "upgrade-tmp"
[    1.285633] TCP: cubic registered
[    1.288907] NET: Registered protocol family 17
[    1.293543] Registering SWP/SWPB emulation handler
[    1.299182] regulator-dummy: disabling
[    1.302958] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.313226] ALSA device list:
[    1.316190]   No soundcards found.
[    4.547906] jffs2: Empty flash at 0x023f600c ends at 0x023f6800
[    4.599355] jffs2: jffs2_scan_inode_node(): CRC failed on node at 0x02937fc8: Read 0xffffffff, calculated 0xe89f3896
[    4.614768] jffs2: Empty flash at 0x02938030 ends at 0x02938800
[    5.367971] VFS: Mounted root (jffs2 filesystem) on device 31:1.
[    5.376969] devtmpfs: mounted
[    5.380078] Freeing unused kernel memory: 200K (c0676000 - c06a8000)
[    7.099695] random: dd urandom read with 1 bits of entropy available
[    7.525956] 
[    7.525956] bcm54xx_config_init
[    8.135957] 
[    8.135957] bcm54xx_config_init
[   12.136790] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   12.142897] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   28.638592] In axi fpga driver!
[   28.641659] request_mem_region OK!
[   28.645049] AXI fpga dev virtual address is 0xf0112000
[   28.650195] *base_vir_addr = 0x8c504
[   28.661345] In fpga mem driver!
[   28.664418] request_mem_region OK!
[   28.668045] fpga mem virtual address is 0xf3000000
[   30.895159] 
[   30.895159] bcm54xx_config_init
[   31.675104] 
[   31.675104] bcm54xx_config_init
[   36.675419] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   36.681523] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   85.994692] jffs2: warning: (1095) jffs2_do_read_inode_internal: Truncating ino #2089 to 46292 bytes failed because it only had 27394 bytes to start with!
[  332.299897] random: nonblocking pool is initialized
prepare send works thread on chain[0]
prepare send works thread on chain[1]
prepare send works thread on chain[2]
prepare send works thread on chain[3]
prepare send works thread on chain[4]
prepare send works thread on chain[5]
prepare send works thread on chain[6]
prepare send works thread on chain[7]
prepare send works thread on chain[8]
prepare send works thread on chain[9]
prepare send works thread on chain[10]
prepare send works thread on chain[11]
prepare send works thread on chain[12]
prepare send works thread on chain[13]
prepare send works thread on chain[14]
prepare send works thread on chain[15]
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
set command mode to VIL

singleBoardTest: AsicType = 1387

singleBoardTest: asicNum = 64

singleBoardTest: real AsicNum = 63

--- check asic number
set_baud=1
The min freq=700
set real timeout 224, need sleep=1634304
disable_pic_dac on chain[5] testDone[5]=1
disable_pic_dac on chain[6] testDone[6]=1
disable_pic_dac on chain[7] testDone[7]=1
search freq for 1 times, completed chain = 3, total chain num = 3 
do 12 8xPatten test for 1 times
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]

Test Patten on Chain[5] use PIC freq

Test Patten on Chain[5] use PIC freq
Freq[00]=470	Freq[01]=568	Freq[02]=606	Freq[03]=470	Freq[04]=575	Freq[05]=606	Freq[06]=481	Freq[07]=575	
Freq[08]=606	Freq[09]=500	Freq[10]=581	Freq[11]=606	Freq[12]=500	Freq[13]=581	Freq[14]=612	Freq[15]=537	
Freq[16]=543	Freq[17]=504	Freq[18]=537	Freq[19]=593	Freq[20]=537	Freq[21]=537	Freq[22]=593	Freq[23]=537	
Freq[24]=543	Freq[25]=600	Freq[26]=568	Freq[27]=543	Freq[28]=600	Freq[29]=543	Freq[30]=550	Freq[31]=543	
Freq[32]=612	Freq[33]=543	Freq[34]=537	Freq[35]=612	Freq[36]=556	Freq[37]=587	Freq[38]=531	Freq[39]=556	
Freq[40]=606	Freq[41]=550	Freq[42]=543	Freq[43]=550	Freq[44]=618	Freq[45]=556	Freq[46]=606	Freq[47]=537	
Freq[48]=500	Freq[49]=470	Freq[50]=618	Freq[51]=562	Freq[52]=606	Freq[53]=612	Freq[54]=562	Freq[55]=556	
Freq[56]=618	Freq[57]=568	Freq[58]=606	Freq[59]=618	Freq[60]=568	Freq[61]=606	Freq[62]=606	

Test Patten on Chain[6] use PIC freq

Test Patten on Chain[6] use PIC freq
Freq[00]=600	Freq[01]=650	Freq[02]=650	Freq[03]=618	Freq[04]=650	Freq[05]=650	Freq[06]=625	Freq[07]=650	
Freq[08]=650	Freq[09]=650	Freq[10]=650	Freq[11]=650	Freq[12]=587	Freq[13]=650	Freq[14]=650	Freq[15]=650	
Freq[16]=650	Freq[17]=575	Freq[18]=650	Freq[19]=568	Freq[20]=650	Freq[21]=650	Freq[22]=637	Freq[23]=650	
Freq[24]=650	Freq[25]=650	Freq[26]=618	Freq[27]=650	Freq[28]=650	Freq[29]=637	Freq[30]=650	Freq[31]=650	
Freq[32]=650	Freq[33]=650	Freq[34]=650	Freq[35]=625	Freq[36]=650	Freq[37]=631	Freq[38]=650	Freq[39]=643	
Freq[40]=650	Freq[41]=650	Freq[42]=650	Freq[43]=650	Freq[44]=650	Freq[45]=650	Freq[46]=650	Freq[47]=643	
Freq[48]=618	Freq[49]=650	Freq[50]=650	Freq[51]=650	Freq[52]=631	Freq[53]=650	Freq[54]=650	Freq[55]=650	
Freq[56]=650	Freq[57]=650	Freq[58]=568	Freq[59]=650	Freq[60]=568	Freq[61]=650	Freq[62]=650	

Test Patten on Chain[7] use PIC freq

Test Patten on Chain[7] use PIC freq
Freq[00]=575	Freq[01]=656	Freq[02]=625	Freq[03]=575	Freq[04]=656	Freq[05]=656	Freq[06]=575	Freq[07]=656	
Freq[08]=656	Freq[09]=581	Freq[10]=656	Freq[11]=656	Freq[12]=593	Freq[13]=656	Freq[14]=656	Freq[15]=656	
Freq[16]=656	Freq[17]=650	Freq[18]=656	Freq[19]=650	Freq[20]=656	Freq[21]=656	Freq[22]=656	Freq[23]=537	
Freq[24]=656	Freq[25]=656	Freq[26]=581	Freq[27]=656	Freq[28]=656	Freq[29]=650	Freq[30]=656	Freq[31]=550	
Freq[32]=656	Freq[33]=631	Freq[34]=656	Freq[35]=656	Freq[36]=656	Freq[37]=537	Freq[38]=656	Freq[39]=656	
Freq[40]=643	Freq[41]=656	Freq[42]=656	Freq[43]=643	Freq[44]=562	Freq[45]=656	Freq[46]=656	Freq[47]=650	
Freq[48]=656	Freq[49]=656	Freq[50]=656	Freq[51]=656	Freq[52]=568	Freq[53]=656	Freq[54]=631	Freq[55]=625	
Freq[56]=656	Freq[57]=656	Freq[58]=556	Freq[59]=656	Freq[60]=575	Freq[61]=656	Freq[62]=656	
use PIC voltage=870 on chain[5]
now set pic voltage=125 on chain[5]
use PIC voltage=870 on chain[6]
now set pic voltage=125 on chain[6]
use PIC voltage=870 on chain[7]
now set pic voltage=125 on chain[7]
enable_pic_dac on chain[5]
enable_pic_dac on chain[6]
enable_pic_dac on chain[7]
set command mode to VIL

doHeatBoard: AsicType = 1387

doHeatBoard: asicNum = 64

doHeatBoard: real AsicNum = 63

--- check asic number
check chain[5]: asicNum = 63
check chain[6]: asicNum = 63
check chain[7]: asicNum = 63
Set Freq of PIC for Test Patten on Chain[5]
Set Freq of PIC for Test Patten on Chain[6]
Set Freq of PIC for Test Patten on Chain[7]
set_baud=2
The min freq=470
set real timeout 334, need sleep=2436864
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
wait send works done on chain[5]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[7]
get send work num :57456 on Chain[6]
wait send works done on chain[6]
wait send works done on chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456


freq[00]=470	freq[01]=568	freq[02]=606	freq[03]=470	freq[04]=575	freq[05]=606	freq[06]=481	freq[07]=575	
freq[08]=606	freq[09]=500	freq[10]=581	freq[11]=606	freq[12]=500	freq[13]=581	freq[14]=612	freq[15]=537	
freq[16]=543	freq[17]=504	freq[18]=537	freq[19]=593	freq[20]=537	freq[21]=537	freq[22]=593	freq[23]=537	
freq[24]=543	freq[25]=600	freq[26]=568	freq[27]=543	freq[28]=600	freq[29]=543	freq[30]=550	freq[31]=543	
freq[32]=612	freq[33]=543	freq[34]=537	freq[35]=612	freq[36]=556	freq[37]=587	freq[38]=531	freq[39]=556	
freq[40]=606	freq[41]=550	freq[42]=543	freq[43]=550	freq[44]=618	freq[45]=556	freq[46]=606	freq[47]=537	
freq[48]=500	freq[49]=470	freq[50]=618	freq[51]=562	freq[52]=606	freq[53]=612	freq[54]=562	freq[55]=556	
freq[56]=618	freq[57]=568	freq[58]=606	freq[59]=618	freq[60]=568	freq[61]=606	freq[62]=606	

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:34998
last_nonce_num:0
get nonces on chain[6]
require nonce number:912
require validnonce number:57456


freq[00]=600	freq[01]=650	freq[02]=650	freq[03]=618	freq[04]=650	freq[05]=650	freq[06]=625	freq[07]=650	
freq[08]=650	freq[09]=650	freq[10]=650	freq[11]=650	freq[12]=587	freq[13]=650	freq[14]=650	freq[15]=650	
freq[16]=650	freq[17]=575	freq[18]=650	freq[19]=568	freq[20]=650	freq[21]=650	freq[22]=637	freq[23]=650	
freq[24]=650	freq[25]=650	freq[26]=618	freq[27]=650	freq[28]=650	freq[29]=637	freq[30]=650	freq[31]=650	
freq[32]=650	freq[33]=650	freq[34]=650	freq[35]=625	freq[36]=650	freq[37]=631	freq[38]=650	freq[39]=643	
freq[40]=650	freq[41]=650	freq[42]=650	freq[43]=650	freq[44]=650	freq[45]=650	freq[46]=650	freq[47]=643	
freq[48]=618	freq[49]=650	freq[50]=650	freq[51]=650	freq[52]=631	freq[53]=650	freq[54]=650	freq[55]=650	
freq[56]=650	freq[57]=650	freq[58]=568	freq[59]=650	freq[60]=568	freq[61]=650	freq[62]=650	

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:39562
last_nonce_num:0
get nonces on chain[7]
require nonce number:912
require validnonce number:57456


freq[00]=575	freq[01]=656	freq[02]=625	freq[03]=575	freq[04]=656	freq[05]=656	freq[06]=575	freq[07]=656	
freq[08]=656	freq[09]=581	freq[10]=656	freq[11]=656	freq[12]=593	freq[13]=656	freq[14]=656	freq[15]=656	
freq[16]=656	freq[17]=650	freq[18]=656	freq[19]=650	freq[20]=656	freq[21]=656	freq[22]=656	freq[23]=537	
freq[24]=656	freq[25]=656	freq[26]=581	freq[27]=656	freq[28]=656	freq[29]=650	freq[30]=656	freq[31]=550	
freq[32]=656	freq[33]=631	freq[34]=656	freq[35]=656	freq[36]=656	freq[37]=537	freq[38]=656	freq[39]=656	
freq[40]=643	freq[41]=656	freq[42]=656	freq[43]=643	freq[44]=562	freq[45]=656	freq[46]=656	freq[47]=650	
freq[48]=656	freq[49]=656	freq[50]=656	freq[51]=656	freq[52]=568	freq[53]=656	freq[54]=631	freq[55]=625	
freq[56]=656	freq[57]=656	freq[58]=556	freq[59]=656	freq[60]=575	freq[61]=656	freq[62]=656	

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:39372
last_nonce_num:57
Test Patten on chain[5]: OK!
Test Patten on chain[6]: OK!
Test Patten on chain[7]: OK!
disable_pic_dac on chain[5]
disable_pic_dac on chain[6]
disable_pic_dac on chain[7]
waiting for send_func to exit of chain[0]
waiting for send_func to exit of chain[1]
waiting for send_func to exit of chain[2]
waiting for send_func to exit of chain[3]
waiting for send_func to exit of chain[4]
waiting for send_func to exit of chain[5]
waiting for send_func to exit of chain[6]
waiting for send_func to exit of chain[7]
waiting for send_func to exit of chain[8]
waiting for send_func to exit of chain[9]
waiting for send_func to exit of chain[10]
waiting for send_func to exit of chain[11]
waiting for send_func to exit of chain[12]
waiting for send_func to exit of chain[13]
waiting for send_func to exit of chain[14]
waiting for send_func to exit of chain[15]
waiting for receive_func to exit!
waiting for pic heart to exit!
Start bmminer ...
miner total rate=13203GH/s fixed rate=13000GH/s
read PIC voltage=870 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.1V
OK: Chain[J6] is for this machine! [minerMAC: 00:13:f0:a4:b2:1b]
Chain:5 temp offset=-70
Chain:5 base freq=470
Asic[ 0]:470 
Asic[ 1]:568 Asic[ 2]:606 Asic[ 3]:470 Asic[ 4]:575 Asic[ 5]:606 Asic[ 6]:481 Asic[ 7]:575 Asic[ 8]:606 
Asic[ 9]:500 Asic[10]:581 Asic[11]:606 Asic[12]:500 Asic[13]:581 Asic[14]:612 Asic[15]:537 Asic[16]:543 
Asic[17]:504 Asic[18]:537 Asic[19]:593 Asic[20]:537 Asic[21]:537 Asic[22]:593 Asic[23]:537 Asic[24]:543 
Asic[25]:600 Asic[26]:568 Asic[27]:543 Asic[28]:600 Asic[29]:543 Asic[30]:550 Asic[31]:543 Asic[32]:612 
Asic[33]:543 Asic[34]:537 Asic[35]:612 Asic[36]:556 Asic[37]:587 Asic[38]:531 Asic[39]:556 Asic[40]:606 
Asic[41]:550 Asic[42]:543 Asic[43]:550 Asic[44]:618 Asic[45]:556 Asic[46]:606 Asic[47]:537 Asic[48]:500 
Asic[49]:470 Asic[50]:618 Asic[51]:562 Asic[52]:606 Asic[53]:612 Asic[54]:562 Asic[55]:556 Asic[56]:618 
Asic[57]:568 Asic[58]:606 Asic[59]:618 Asic[60]:568 Asic[61]:606 Asic[62]:606 
Chain:5 max freq=618
Chain:5 min freq=470

read PIC voltage=870 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.1V
OK: Chain[J7] is for this machine! [minerMAC: 00:13:f0:a4:b2:1b]
Chain:6 temp offset=-70
Chain:6 base freq=568
Asic[ 0]:600 
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:618 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:625 Asic[ 7]:650 Asic[ 8]:650 
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:587 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650 
Asic[17]:575 Asic[18]:650 Asic[19]:568 Asic[20]:650 Asic[21]:650 Asic[22]:637 Asic[23]:650 Asic[24]:650 
Asic[25]:650 Asic[26]:618 Asic[27]:650 Asic[28]:650 Asic[29]:637 Asic[30]:650 Asic[31]:650 Asic[32]:650 
Asic[33]:650 Asic[34]:650 Asic[35]:625 Asic[36]:650 Asic[37]:631 Asic[38]:650 Asic[39]:643 Asic[40]:650 
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:643 Asic[48]:618 
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:631 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650 
Asic[57]:650 Asic[58]:568 Asic[59]:650 Asic[60]:568 Asic[61]:650 Asic[62]:650 
Chain:6 max freq=650
Chain:6 min freq=568

read PIC voltage=870 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.1V
OK: Chain[J8] is for this machine! [minerMAC: 00:13:f0:a4:b2:1b]
Chain:7 temp offset=-70
Chain:7 base freq=537
Asic[ 0]:575 
Asic[ 1]:656 Asic[ 2]:625 Asic[ 3]:575 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:575 Asic[ 7]:656 Asic[ 8]:656 
Asic[ 9]:581 Asic[10]:656 Asic[11]:656 Asic[12]:593 Asic[13]:656 Asic[14]:656 Asic[15]:656 Asic[16]:656 
Asic[17]:650 Asic[18]:656 Asic[19]:650 Asic[20]:656 Asic[21]:656 Asic[22]:656 Asic[23]:537 Asic[24]:656 
Asic[25]:656 Asic[26]:581 Asic[27]:656 Asic[28]:656 Asic[29]:650 Asic[30]:656 Asic[31]:550 Asic[32]:656 
Asic[33]:631 Asic[34]:656 Asic[35]:656 Asic[36]:656 Asic[37]:537 Asic[38]:656 Asic[39]:656 Asic[40]:643 
Asic[41]:656 Asic[42]:656 Asic[43]:643 Asic[44]:562 Asic[45]:656 Asic[46]:656 Asic[47]:650 Asic[48]:656 
Asic[49]:656 Asic[50]:656 Asic[51]:656 Asic[52]:568 Asic[53]:656 Asic[54]:631 Asic[55]:625 Asic[56]:656 
Asic[57]:656 Asic[58]:556 Asic[59]:656 Asic[60]:575 Asic[61]:656 Asic[62]:656 
Chain:7 max freq=656
Chain:7 min freq=537


Miner fix freq ...
read PIC voltage=870 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.1V
OK: Chain[J6] is for this machine! [minerMAC: 00:13:f0:a4:b2:1b]
Chain:5 temp offset=-70
Chain:5 base freq=470
Asic[ 0]:470 
Asic[ 1]:568 Asic[ 2]:606 Asic[ 3]:470 Asic[ 4]:575 Asic[ 5]:606 Asic[ 6]:481 Asic[ 7]:575 Asic[ 8]:606 
Asic[ 9]:500 Asic[10]:581 Asic[11]:606 Asic[12]:500 Asic[13]:581 Asic[14]:612 Asic[15]:537 Asic[16]:543 
Asic[17]:504 Asic[18]:537 Asic[19]:593 Asic[20]:537 Asic[21]:537 Asic[22]:593 Asic[23]:537 Asic[24]:543 
Asic[25]:600 Asic[26]:568 Asic[27]:543 Asic[28]:600 Asic[29]:543 Asic[30]:550 Asic[31]:543 Asic[32]:612 
Asic[33]:543 Asic[34]:537 Asic[35]:612 Asic[36]:556 Asic[37]:587 Asic[38]:531 Asic[39]:556 Asic[40]:606 
Asic[41]:550 Asic[42]:543 Asic[43]:550 Asic[44]:618 Asic[45]:556 Asic[46]:606 Asic[47]:537 Asic[48]:500 
Asic[49]:470 Asic[50]:618 Asic[51]:562 Asic[52]:606 Asic[53]:612 Asic[54]:562 Asic[55]:556 Asic[56]:618 
Asic[57]:568 Asic[58]:606 Asic[59]:618 Asic[60]:568 Asic[61]:606 Asic[62]:606 
Chain:5 max freq=618
Chain:5 min freq=470

read PIC voltage=870 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.1V
OK: Chain[J7] is for this machine! [minerMAC: 00:13:f0:a4:b2:1b]
Chain:6 temp offset=-70
Chain:6 base freq=568
Asic[ 0]:600 
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:618 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:625 Asic[ 7]:631 Asic[ 8]:631 
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:587 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631 
Asic[17]:575 Asic[18]:631 Asic[19]:568 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631 
Asic[25]:631 Asic[26]:618 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631 
Asic[33]:631 Asic[34]:631 Asic[35]:625 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631 
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:618 
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631 
Asic[57]:631 Asic[58]:568 Asic[59]:631 Asic[60]:568 Asic[61]:631 Asic[62]:631 
Chain:6 max freq=631
Chain:6 min freq=568

read PIC voltage=870 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.1V
OK: Chain[J8] is for this machine! [minerMAC: 00:13:f0:a4:b2:1b]
Chain:7 temp offset=-70
Chain:7 base freq=537
Asic[ 0]:575 
Asic[ 1]:631 Asic[ 2]:625 Asic[ 3]:575 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:575 Asic[ 7]:631 Asic[ 8]:631 
Asic[ 9]:581 Asic[10]:631 Asic[11]:637 Asic[12]:593 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637 
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:537 Asic[24]:637 
Asic[25]:637 Asic[26]:581 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:550 Asic[32]:637 
Asic[33]:631 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:537 Asic[38]:637 Asic[39]:637 Asic[40]:637 
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:562 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637 
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:568 Asic[53]:637 Asic[54]:631 Asic[55]:625 Asic[56]:637 
Asic[57]:637 Asic[58]:556 Asic[59]:637 Asic[60]:575 Asic[61]:637 Asic[62]:637 
Chain:7 max freq=637
Chain:7 min freq=537

max freq = 637
Chain[5] Chip[62] local Temp=71
Chain[5] Chip[62] middle Temp=87
Chain[6] Chip[62] local Temp=71
Chain[6] Chip[62] middle Temp=90
Chain[7] Chip[62] local Temp=72
Chain[7] Chip[62] middle Temp=90
FAN PWM: 45

Frankly, I think the performance checks are a good solution to the fact that due to 16nm process variations the chips and therefore boards have a 'butter zone' that can be substantially different from one wafer to another.

It also leads to an idea of looking over a stock of miners then taking the best boards and putting them in 1 'Super' miner... Wonder what a single 3-board miner could hit if all boards can run at top speed? mebe say >16THs?
So far after nearly 24hrs the miner works great

tntdgcr

full member

Activity: 219

Merit: 100

Bitcoin Mining Hosting

Quote from: GrumpyBear2 on October 14, 2016, 01:56:30 PM

Just got mine today, thanks for the warning. It took over five minutes to start hashing after a reboot with my pool settings.

Yep the panel settings have been changed as noted above. But hashing at 11.6 ish.

we got a large batch in yesterday of the 12 Evens. Most work as advertised ( only one is 11.2 TH ) .

They definitely take longer to boot / mine , up to 20 Min of Uptime before mining, and I think it's due to the mixed Boards in the unit. They are clocking up / down to what they can work on, and I feel this is probably why they use BM Miner over CG Miner.

After a while the units work fine. You can no longer tinker with Freq.

GrumpyBear2

newbie

Activity: 27

Merit: 0

Just got mine today, thanks for the warning. It took over five minutes to start hashing after a reboot with my pool settings.

Yep the panel settings have been changed as noted above. But hashing at 11.6 ish.

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

Quote from: hhumaidan on October 14, 2016, 05:20:05 AM

Please inform us if it is better than the previous batches because I am really considering to buy one that is reliable

For the most part with the S9's it seems it is a crap shoot. I have 8 of the s9 miners spanning batch 1 through 17 and most run fine. Yes 2 of them, a batch-1 and a batch-11 had a hash board die (which were repaired by Bitmain Warranty) but so far it looks like no single batch is better than another.

hhumaidan

full member

Activity: 143

Merit: 100

Please inform us if it is better than the previous batches because I am really considering to buy one that is reliable

Xircom

legendary

Activity: 938

Merit: 1000

Fuzzy,

Point taken... Wink

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

Just got a s9 batch-17 and... Bitmain has changed the firmware.
I will post in detail tomorrow but for a summary of changes:

They have changed the board channels used and so the temp reporting channels. Now using channels 6, 7, and 8.
Looks like changing the frequency may be gone. There is no longer a GUI option to change it. On startup, the firmware goes through several checks per-board and sets the best freq and possibly Vcore as well per-board. When all is done, the boards report different frequencies. This could turn out to be rather -- interesting.
Looking at the Kernel Log it shows several lists of freq and voltage it tries for each board. A note at the beginning of each list says that freq is now stored in the PIC. Now does that mean that a warm boot bypasses the testing -- dunna know but hope so.

I'll post the Kernel Log tomorrow. Also fan speed no longer has a setting on the BMminer GUI. Log says is set as needed starting at 40% Oh, the fans are on different channels as well. Think fans are now reported in position ~~6 an 8~~. I'll verify tomorrow. edit: Fans in positions 3 and 6

Due to the time it takes for the new booting process -- around 4 min or more -- better set dead miner/offline/etc monitoring to wait at least that 4 maybe even 5 min before trying to issue another reboot call to the miner...

Frankly, during the setup process for miner name and pool assignments the reboots needed were taking so long that I thought the miner was going to be a DOA! Shocked

Folks, keep in mind that much longer time needed to come to life before you start to get miffed/worried like I was. A couple times when it was taking A LOT longer than was normal with the earlier batches I forced reboots trying to get the miner to respond. thankfully it didn't brick.

Topic: s9 > batch 16 and Auto-Tune Issues - page 3. (Read 5474 times)