Setup mining Rig 6 Pin to Dual PCIe 8 Pin (6+2) one GPU one Riser same cable - page 2.

nc50lc

legendary

Activity: 2534

Merit: 6080

Self-proclaimed Genius

Quote from: commandera on June 25, 2020, 10:27:33 PM

How many PSUs do you have and their 12v rail power rating?
only 1 psu . not sure about rail , but is platium 1200w

How many GPUs do you have and their power consumption or model?
x7 GPU , x3 570 8gb , x3 580 8gb , x1 5700 , ( have nvidia 1060 6gb too )
let's talk about x7 GPU

Forget the wires, you don't even have enough juice to stably power those 7GPUs.
I'd recommend adding another PSU to power the other three GPUs, plus you wont be needing those splitters.

There are a lot of guides in the internet on how to setup multiple PSU rig.

philipma1957

legendary

Activity: 4326

Merit: 8899

'The right to privacy matters'

this does not belong in support.

gpu mining mines alt coins and needs to be in altcoin mining.

You need to be sure you do not over clock the gpus.

If they all pull 130 watts you would be at 910 plus gpu and cpu and ram and fans say 90 total 1000.

I do not like rose will as I find they do burn out when pushed.

If you do 1000 watts that psu will fail in under a year.

I have mined with a lot of rose wills and 70% or less. is best for them.
so you want to pull about 840-900 watts with it not 1000.

i just checked the pinout and it does 12 pin pcie jacks. they are more subject to over heating.

I would run six cards not seven.

It is single rail which is easier to mine with.

commandera

member

Activity: 243

Merit: 71

Quote from: nc50lc on June 25, 2020, 09:50:33 PM

The one displayed in the image is fine but the safety depends on the whole set-up.

How many PSUs do you have and their 12v rail power rating?
How many GPUs do you have and their power consumption or model?

Also, your 6/8-pin PSU cable should be able to withstand the current drawn by the two split wires.
Most "good brands" does.

How many PSUs do you have and their 12v rail power rating?
only 1 psu . not sure about rail , but is platium 1200w
https://www.newegg.com/global/kw-en/rosewill-tachyon-1200-tachyon-series-1200w/p/N82E16817182417?Item=N82E16817182417

How many GPUs do you have and their power consumption or model?

x7 GPU , x3 570 8gb , x3 580 8gb , x1 5700 , ( have nvidia 1060 6gb too )
let's talk about x7 GPU

nc50lc

legendary

Activity: 2534

Merit: 6080

Self-proclaimed Genius

The one displayed in the image is fine but the safety depends on the whole set-up.

How many PSUs do you have and their 12v rail power rating?
How many GPUs do you have and their power consumption or model?

Also, your 6/8-pin PSU cable should be able to withstand the current drawn by the two split wires.
Most "good brands" does.

AhmadM

sr. member

Activity: 1008

Merit: 308

If you just getting started for mining then you should move this thread to Mining support board, many people with good knowledge on mining will answer your questions there.

commandera

member

Activity: 243

Merit: 71

Hello
i'm setting up my Rig and want who confirm this fine or not , ?

The 6 Pin to Dual PCIe 8 Pin (6+2) Graphics Card PCI Express Power Adapter GPU VGA Y-Splitter Extension Cable Mining Video Card Power Cable 9 inches 6 Pack +Bonus TeamProfitcom

Genuine new copper cores, no recycled materials.The length of the product(Approx): 9-inch (23cm).Gauge: standard 18AWG - UL 1007
Link
https://www.amazon.com/gp/product/B0776PMH16/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Do is fine using like this image,
https://imgur.com/a/jhT5Rmu

Topic: Setup mining Rig 6 Pin to Dual PCIe 8 Pin (6+2) one GPU one Riser same cable - page 2. (Read 357 times)