Topic: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner - page 136. (Read 452416 times)
Timeout should be 35, but if 36 run well...keep it running.
many thanks for everyone's help.
this is what I ended up with for the asic-freq file
cheers,
this is what I ended up with for the asic-freq file
cheers,
I have ask you many posts earlier to drop this, but you just keep coming....
I could say the same thing about you. Even after i wrote:"We don't need to wasting this thread with more OT. So i am done here about this discussion."
You need to answer one more useless post.
That why forum exist you know 
Forum exist, because ppl share idea and opinion. That is the main idea behind. But in the last years a new generation of lazy leecher come up, to lazy to read and not willing to spend 1 minute of research or own initiative plus never support anything.If this is why forum exist, the supporter will become extinct. As i say, my help to post the thread where exactly ALL question get answered is much more worth, then wrote here everything again spoon-feeding and step by step. in 5 days the next guy comes across here, not willing to spend more time then 1 min to found what he looking for and so on. The forum is full of garbage question about the same thing again and again.
You claim, that this thread here has 28 pages? You got the answer by yourself, this behavior of ask the same questions again instead of reading is the reason!
But anyway, as i say'd:
"Your intention is honorable, but a bit own initiative is always helpful." Push them to help them self even if a thread about the problem and the solution exist already is much more helpful, based on long-term.
We don't need to wasting this thread with more OT. So i am done here about this discussion.
Link to oc thread is known and answer of how to ssh under windows is burried in mid thread!
How to ssh under winows are no answered on many places such as step by step how to overclock the miner!!!
It was a simple question not asked again and again, so just stop to provoce!
I have ask you many posts earlier to drop this, but you just keep coming....
Edit
Like i said few post prior, go ahead and patrionize with more post.
That why forum exist you know
Forum exist, because ppl share idea and opinion. That is the main idea behind. But in the last years a new generation of lazy leecher come up, to lazy to read and not willing to spend 1 minute of research or own initiative plus never support anything.If this is why forum exist, the supporter will become extinct. As i say, my help to post the thread where exactly ALL question get answered is much more worth, then wrote here everything again spoon-feeding and step by step. in 5 days the next guy comes across here, not willing to spend more time then 1 min to found what he looking for and so on. The forum is full of garbage question about the same thing again and again.
You claim, that this thread here has 28 pages? You got the answer by yourself, this behavior of ask the same questions again instead of reading is the reason!
But anyway, as i say'd:
"Your intention is honorable, but a bit own initiative is always helpful." Push them to help them self even if a thread about the problem and the solution exist already is much more helpful, based on long-term.
We don't need to wasting this thread with more OT. So i am done here about this discussion.
Okay, so I logged in with SSH via putty and gained access as root.
How do I edit /etc/config/asic-freq ?
It says permission denied.
@alfabitcoin: You get the point NOW what i mean? How do I edit /etc/config/asic-freq ?
It says permission denied.
Help is, to show the way WHERE they gonna get help themself, not to spoon-feed. As you can see now, he ask again, and again and again, instead of read the posted thread. This is time wasting, because then the next ask again, and the next, and...
Whatever man, if you do not want to help to members who are unsecure and where not all details are explained then just dont.
Some members need clarification, out of fear they rather ask! That why forum exist you know
I have answered him in one post, and debate with you is a lot longer what is a waste of time and space.
Hes first question was simple what needed single word answer and not represented issue explained like oc.
Hes second was also as such. If op post were enough then i supose this thread would not have 28 pages among other thread where we discuss about antminer setup!
Okay, so I logged in with SSH via putty and gained access as root.
How do I edit /etc/config/asic-freq ?
It says permission denied.
How do I edit /etc/config/asic-freq ?
It says permission denied.
'vi /etc/config/asic-freq'
Okay, so I logged in with SSH via putty and gained access as root.
How do I edit /etc/config/asic-freq ?
It says permission denied.
@alfabitcoin: You get the point NOW what i mean? How do I edit /etc/config/asic-freq ?
It says permission denied.
Help is, to show the way WHERE they gonna get help themself, not to spoon-feed. As you can see now, he ask again, and again and again, instead of read the posted thread. This is time wasting, because then the next ask again, and the next, and...
Okay, so I logged in with SSH via putty and gained access as root.
How do I edit /etc/config/asic-freq ?
It says permission denied.
How do I edit /etc/config/asic-freq ?
It says permission denied.
what is the chances overclocking will hurt the miner?
did any of you guys managed to make those puppies work via wifi ?
I'm trying to use bfgproxy to centralize my pool config.
Not sure this is an AntMiner specific issue but in case anyone here is interested:
https://bitcointalksearch.org/topic/m.4397778
Not sure this is an AntMiner specific issue but in case anyone here is interested:
https://bitcointalksearch.org/topic/m.4397778
^vi isnt that difficult:
1) type 'i' to enter the editing (INSERT) mode
2) make all changes needed
3) hit ESC to escape the editing mode
4) type ':w' to write to file
5) type :wq!' to write (twice for good luck) anf force-quit
1) type 'i' to enter the editing (INSERT) mode
2) make all changes needed
3) hit ESC to escape the editing mode
4) type ':w' to write to file
5) type :wq!' to write (twice for good luck
) anf force-quitwith nano
1)make change
2)ctrl-O to write changes
2)ctl-X to exit
^vi isnt that difficult:
1) type 'i' to enter the editing (INSERT) mode
2) make all changes needed
3) hit ESC to escape the editing mode
4) type ':w' to write to file
5) type :wq!' to write (twice for good luck) anf force-quit
1) type 'i' to enter the editing (INSERT) mode
2) make all changes needed
3) hit ESC to escape the editing mode
4) type ':w' to write to file
5) type :wq!' to write (twice for good luck
) anf force-quit Reread my post. You have intructed pistachio that he can find all deatils how to ssh in the first post what is untrue, so can we drop this argue?
I don't talk about the first post of the OC thread, i talk about the first post here. And here is my post, which you read wrong Just follow the LINK (to the Thread about Overclocking) in the First POST (HERE). The Link will bring everybody who want overclock to this THREAD:
https://bitcointalksearch.org/topic/m.3730601
I guess you missunderstand my post, never mind.
Sorry for misunderstanding, but now i think all is cleared
Edit
@goxed
If you read please can you update op in oc thread with putty.exe software and unix editor commands?
Woud save some users to find answers and not to read trough pages and pages of any thread.
For those that hate vi, you can install nano, which is 10x more user friendly:
opkg install nano
Your edit your post mate. And i don't read posts above again, even not if they are wroted a page before...
So what you want to say? You Copy/Paste Post 58. Congratulation, you support laziness.
What you want to say, that i have changed that post now just to respond to you? Yeah righ, showing your true colors!So what you want to say? You Copy/Paste Post 58. Congratulation, you support laziness.
I have answered pinochio much earlier and he was happy, but only then you have shown without any reason??
Beside pinochio asked how to ssh and not step by step guide to oc.and i have answered him, you jus want to fight over nothing.
I will drop this, seems to be that you have to have the last to say, its imature.
He asked how to ssh under win and i answered putty.exe. he said thanks and then you wrote unecessery post what answer nothing and continue to distort things.
You have missed the point of pinochio question. Answer is simple (putty.exe) what I did. On other thread (oc thread) that answer is burried on 3.rd page and you rather opt not to answer but to point to post where answer can not be found and continue to aruge with me?
So you do not want to help, but want to debate and judge others?
What a waste of time.
Go ahead and disturb and distort facts further....i am done.
Your edit your post mate. And i don't read posts above again, even not if they are wroted a page before...
So what you want to say? You Copy/Paste Post 58. Congratulation, you support laziness.
So what you want to say? You Copy/Paste Post 58. Congratulation, you support laziness.
https://bitcointalksearch.org/topic/m.3730601
Page 3, Post 58. All Info in one post.
Your intention is honorable, but a bit own initiative is always helpful.
Page 3, Post 58. All Info in one post.
Your intention is honorable, but a bit own initiative is always helpful.
Reread my post. You have intructed pistachio that he can find all deatils how to ssh in the first post what is untrue, so can we drop this argue?
I don't talk about the first post of the OC thread, i talk about the first post here. And here is my post, which you read wrong Just follow the LINK (to the Thread about Overclocking) in the First POST (HERE). The Link will bring everybody who want overclock to this THREAD:
https://bitcointalksearch.org/topic/m.3730601
I guess you missunderstand my post, never mind.
Sorry for misunderstanding, but now i think all is cleared
Edit
@goxed
If you read please can you update op in oc thread with putty.exe software and unix editor commands?
Woud save some users to find answers and not to read trough pages and pages of any thread.
Jump to: