Topic: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner - page 135. (Read 452359 times)
Has anyone every run one of these with 2 PSU's?
Hey sushi, would it be possible for me to buy a spare S1 control board? I have one Ant that crashes sometimes, and today I had trouble getting it to start up again. The control board LED would just do the slow blink forever like when it's first booting. Thankfully I got it to start up now through luck or something.
I'm pretty sure the control board is the problem. Could I buy a spare one? I don't want to RMA the one I have because it's working for now and I don't want the downtime.
Let me know please. Thanks.
Edit: Seems I spoke too soon. It crashed again now after running for only a couple minutes.
I'm pretty sure the control board is the problem. Could I buy a spare one? I don't want to RMA the one I have because it's working for now and I don't want the downtime.
Let me know please. Thanks.
Edit: Seems I spoke too soon. It crashed again now after running for only a couple minutes.
Hi,
I am wondering if I am getting too high of HW errors. It shows a lot in the antminer screen but looks okay at my pool's page. This is after I switched back to the 350 setting when it was unstable on 400.
image one is from the antminer
1.
image two and three are from btcguild
2.
the one in black is the antminer
3.
You have lesser then 0.50% HW error that is perfect! I am wondering if I am getting too high of HW errors. It shows a lot in the antminer screen but looks okay at my pool's page. This is after I switched back to the 350 setting when it was unstable on 400.
image one is from the antminer
1.
image two and three are from btcguild
2.
the one in black is the antminer
3.
Hi,
I am wondering if I am getting too high of HW errors. It shows a lot in the antminer screen but looks okay at my pool's page. This is after I switched back to the 350 setting when it was unstable on 400.
image one is from the antminer
1.
image two and three are from btcguild
2.
the one in black is the antminer
3.
I am wondering if I am getting too high of HW errors. It shows a lot in the antminer screen but looks okay at my pool's page. This is after I switched back to the 350 setting when it was unstable on 400.
image one is from the antminer
1.
image two and three are from btcguild
2.
the one in black is the antminer
3.
You need to view HW errors in relation to your other numbers. The % of error is HW / (HW + DiffA + DiffR + DiffS)
In the newer version 1.4 of the Antminer S1 180Ghz, it appearead new 6-pin white connector between red/black power supply connector and SN label.
I would like to know what is its purpose. Is it standard 6-pin power supply PCI-E power connector? Can I use it for connecting to the power supply by usual 6-pin PCI-E cable?
I would like to know what is its purpose. Is it standard 6-pin power supply PCI-E power connector? Can I use it for connecting to the power supply by usual 6-pin PCI-E cable?
Yes, makes life a lot easier
Hi,
I am wondering if I am getting too high of HW errors. It shows a lot in the antminer screen but looks okay at my pool's page. This is after I switched back to the 350 setting when it was unstable on 400.
image one is from the antminer
1.
image two and three are from btcguild
2.
the one in black is the antminer
3.
I am wondering if I am getting too high of HW errors. It shows a lot in the antminer screen but looks okay at my pool's page. This is after I switched back to the 350 setting when it was unstable on 400.
image one is from the antminer
1.
image two and three are from btcguild
2.
the one in black is the antminer
3.
In the newer version 1.4 of the Antminer S1 180Ghz, it appearead new 6-pin white connector between red/black power supply connector and SN label.
I would like to know what is its purpose. Is it standard 6-pin power supply PCI-E power connector? Can I use it for connecting to the power supply by usual 6-pin PCI-E cable?
I would like to know what is its purpose. Is it standard 6-pin power supply PCI-E power connector? Can I use it for connecting to the power supply by usual 6-pin PCI-E cable?
Can anyone offer advice on a Antec VP450p psu which has only 1 pci-e connector. It seems the second rail is only for the cpu power and everything else is on rail 1.
It's a 4+4 atx12v connector for the CPU - How should I connect this to one of my boards? Each connector has two yellow and two blacks. The PCI-E cable is on the other board.
Thanks.
It's a 4+4 atx12v connector for the CPU - How should I connect this to one of my boards? Each connector has two yellow and two blacks. The PCI-E cable is on the other board.
Thanks.
I used the CPU 4 yellow / 4 black cables for a blade with psu that had only 1 pci-e connector... no issues.... but my PSUs are all single rail 520W+
Only room for three of each though?
i put 4 cables into 3 holes.... one of the holes of each color had a twosome...
Just for the record incase anyone is reading through I just used 3 of the yellow 12v and 3 black grounds (left two cables unused covered with electrical tape) and everything is working sound. Give me a pm if you need any help - I have setup two for the first time today - take care.
Can anyone offer advice on a Antec VP450p psu which has only 1 pci-e connector. It seems the second rail is only for the cpu power and everything else is on rail 1.
It's a 4+4 atx12v connector for the CPU - How should I connect this to one of my boards? Each connector has two yellow and two blacks. The PCI-E cable is on the other board.
Thanks.
It's a 4+4 atx12v connector for the CPU - How should I connect this to one of my boards? Each connector has two yellow and two blacks. The PCI-E cable is on the other board.
Thanks.
I used the CPU 4 yellow / 4 black cables for a blade with psu that had only 1 pci-e connector... no issues.... but my PSUs are all single rail 520W+
Only room for three of each though?
i put 4 cables into 3 holes.... one of the holes of each color had a twosome...
Is there anyway to see cgminer screen output on from an xterm on a Antminer, and if so, how?
For a Jupiter, one can simply ssh into the box and run "screen -r", but that doesn't work for AntMiners.
For a Jupiter, one can simply ssh into the box and run "screen -r", but that doesn't work for AntMiners.
Did anyone have issues with resolving dns names?
I can connect to any domain on my laptop which is on the same local network as the antminer. I can ping ip's on the internet from the openwrt diagnostics but I get an error saying bad address.
Is there some dnsmasq setting that needs to be modified or what. I have the eth1 connection pointed to the router for dns requests.
Thanks.
Try in DNS Setting 8.8.8.8 I can connect to any domain on my laptop which is on the same local network as the antminer. I can ping ip's on the internet from the openwrt diagnostics but I get an error saying bad address.
Is there some dnsmasq setting that needs to be modified or what. I have the eth1 connection pointed to the router for dns requests.
Thanks.
Did anyone have issues with resolving dns names?
I can connect to any domain on my laptop which is on the same local network as the antminer. I can ping ip's on the internet from the openwrt diagnostics but I get an error saying bad address.
Is there some dnsmasq setting that needs to be modified or what. I have the eth1 connection pointed to the router for dns requests.
Thanks.
I can connect to any domain on my laptop which is on the same local network as the antminer. I can ping ip's on the internet from the openwrt diagnostics but I get an error saying bad address.
Is there some dnsmasq setting that needs to be modified or what. I have the eth1 connection pointed to the router for dns requests.
Thanks.
I have listen advice from sushi regarding having miner in wifi. Not using antimer wifi, do not enabled it. Just bought tplink tl-wa701nd for 30 usd ( have external power) setup it trough any computer first, and then conect to the ant via ethernet.
You can setup tplink to work as a client or extender, it work the same. So now i can acces from any computer to my miner, tplink or main internet router via web interface.
You can setup tplink to work as a client or extender, it work the same. So now i can acces from any computer to my miner, tplink or main internet router via web interface.
May I know does Antminer comes along with Wifi antenna ? If not which wifi antenna is suitable ?
it does not - basically any screw-on antennae will work, including the kind for wireless routers
Can anyone offer advice on a Antec VP450p psu which has only 1 pci-e connector. It seems the second rail is only for the cpu power and everything else is on rail 1.
It's a 4+4 atx12v connector for the CPU - How should I connect this to one of my boards? Each connector has two yellow and two blacks. The PCI-E cable is on the other board.
Thanks.
It's a 4+4 atx12v connector for the CPU - How should I connect this to one of my boards? Each connector has two yellow and two blacks. The PCI-E cable is on the other board.
Thanks.
I am using a 600W PSU for an antminer, with 1 of the 4pin ATX connectors per board (only 2+ and 2- per blade). The wires have almost no warmth on my setup but i think they may be 16AWG rather than the typical 18AWG or 20AWG
May I know does Antminer comes along with Wifi antenna ? If not which wifi antenna is suitable ?
Can anyone offer advice on a Antec VP450p psu which has only 1 pci-e connector. It seems the second rail is only for the cpu power and everything else is on rail 1.
It's a 4+4 atx12v connector for the CPU - How should I connect this to one of my boards? Each connector has two yellow and two blacks. The PCI-E cable is on the other board.
Thanks.
It's a 4+4 atx12v connector for the CPU - How should I connect this to one of my boards? Each connector has two yellow and two blacks. The PCI-E cable is on the other board.
Thanks.
I used the CPU 4 yellow / 4 black cables for a blade with psu that had only 1 pci-e connector... no issues.... but my PSUs are all single rail 520W+
Only room for three of each though?
Can anyone offer advice on a Antec VP450p psu which has only 1 pci-e connector. It seems the second rail is only for the cpu power and everything else is on rail 1.
It's a 4+4 atx12v connector for the CPU - How should I connect this to one of my boards? Each connector has two yellow and two blacks. The PCI-E cable is on the other board.
Thanks.
It's a 4+4 atx12v connector for the CPU - How should I connect this to one of my boards? Each connector has two yellow and two blacks. The PCI-E cable is on the other board.
Thanks.
I used the CPU 4 yellow / 4 black cables for a blade with psu that had only 1 pci-e connector... no issues.... but my PSUs are all single rail 520W+
Can anyone offer advice on a Antec VP450p psu which has only 1 pci-e connector. It seems the second rail is only for the cpu power and everything else is on rail 1.
It's a 4+4 atx12v connector for the CPU - How should I connect this to one of my boards? Each connector has two yellow and two blacks. The PCI-E cable is on the other board.
Thanks.
It's a 4+4 atx12v connector for the CPU - How should I connect this to one of my boards? Each connector has two yellow and two blacks. The PCI-E cable is on the other board.
Thanks.
Do you use the other 6 pin connector or just leave it blank and connect the six wires only?
Or should I connect both?
Or should I connect both?
Jump to: