Author

Topic: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner - page 143. (Read 452366 times)

newbie
Activity: 22
Merit: 0
WWAN not accepting remote login

the eth1(WAN) setup fine, luci & SSH login fine.
I set additional Wifi(WWAN) & firewall(WAN/WWAN), the internet link is fine & hashing can confirm by pool. how ever I can not get login if only wifi is connected. both web page (luci) & ssh login did not have response from antminer.

anyone have idea? Huh
sr. member
Activity: 458
Merit: 250
beast at work
have any of you tried using BFGminer as proxy ? because everything submited by the antminers get flagged as HW error
sr. member
Activity: 812
Merit: 250
Which error are you talking about?  Huh

I can't see any.
hero member
Activity: 650
Merit: 500
Pick and place? I need more coffee.
Having a lot of errors with one of my ants.  Both units are using 750W power supplies that are exactly the same and running in cool condiions.

Absolutely no overclocking has ever been attempted, nor will it be.

First one, with errors galore:



Second one, very low errors:



Notice that the one with low errors is hotter (stock fan), and has been up longer when I took image.

Anyone else have this much variance?  Is it a firmware issue?

legendary
Activity: 876
Merit: 1000
Etherscan.io
With newest firmware i have higher load avg: 2.3

Can this be changed? One of my ants which got a new firmware has also this high load.

Also ssh and statspage are terrible slow....something is not really ok with the firmware.

Yup.. something definitely off with the latest firmware. Load is way to high that it makes it difficult for the webgui page to load

Downgrading back to the previous firmware
sr. member
Activity: 476
Merit: 250
With newest firmware i have higher load avg: 2.3

Can this be changed? One of my ants which got a new firmware has also this high load.

Also ssh and statspage are terrible slow....something is not really ok with the firmware.
Only to go back to older prior firmware.
legendary
Activity: 1526
Merit: 1002
Bulletproof VPS/VPN/Email @ BadAss.Sx
With newest firmware i have higher load avg: 2.3

Can this be changed? One of my ants which got a new firmware has also this high load.

Also ssh and statspage are terrible slow....something is not really ok with the firmware.

newbie
Activity: 22
Merit: 0
There is an file in github, PIC32MX250.bin uploaded with latest 20131226 firmware update.
Anyone know how to update/use it Huh
That is for pic firmware and its used when build new control unit. Use openwrt firmware as date in file name.
Thanks,
that means we don't need to use it on field update? I think they should just specify it in readme.md.
sr. member
Activity: 476
Merit: 250
There is an file in github, PIC32MX250.bin uploaded with latest 20131226 firmware update.
Anyone know how to update/use it Huh
That is for pic firmware and its used when build new control unit. Use openwrt firmware as date in file name.
newbie
Activity: 22
Merit: 0
There is an file in github, PIC32MX250.bin uploaded with latest 20131226 firmware update.
Anyone know how to update/use it Huh
sr. member
Activity: 476
Merit: 250
With newest firmware i have higher load avg: 2.3
Before i had load avg 1.98What that mean?
 To early to see anything else...
sr. member
Activity: 458
Merit: 250
beast at work
New firmware out!  This includes cgminer 3.8.5-1  Damn that was fast! Shocked

Testing now.

any idea if this will reset current (network) settings ?

I`m not in location and I`m afraid I`ll broken something if I`ll update remote.

https://bitcointalksearch.org/topic/m.3755246

actually, the answer to my question can be found in the last section of the Manual PDF file.

thanx for pointing me in the right direction.
full member
Activity: 202
Merit: 102
New firmware out!  This includes cgminer 3.8.5-1  Damn that was fast! Shocked

Testing now.

any idea if this will reset current (network) settings ?

I`m not in location and I`m afraid I`ll broken something if I`ll update remote.

https://bitcointalksearch.org/topic/m.3755246
sr. member
Activity: 458
Merit: 250
beast at work
New firmware out!  This includes cgminer 3.8.5-1  Damn that was fast! Shocked

Testing now.

any idea if this will reset current (network) settings ?

I`m not in location and I`m afraid I`ll broken something if I`ll update remote.
legendary
Activity: 2128
Merit: 1005
ASIC Wannabe
What do beeps indicate? During that time, the miner reports 0Ghs or similar.

not connected to the network/pool. the older units click and the newer ones beep. the small led on the hashing modules (not the control module) will flicker when the unit is mining normally
hero member
Activity: 650
Merit: 500
Pick and place? I need more coffee.
How do you switch between pools? Also , is there an easier way to do that and add more pools? Maybe remote?
Yes there is a easier way, like using multiminer. But the current firmware with cgminer (3.4.5) has a bug so itwont let you connect to a proxy between the miner and the pool. This is fixed in cgminer 3.9 but then the firmware needs to be updated.

You can read more about this bug here:
https://bitcointalksearch.org/topic/m.4087361

You can try compiling a new cgminer from source (https://github.com/bitmaintech/cgminer) because this has the special bitmain settings but i had a problem that it keep referring to a USB device (the U1 miner). So i have to wait untill Bitmain or Sushi comes in and releases a new firmware that dont have this cgminer bug... I hope they release it ASAP because i dont want to login into my AntMiner everytime to change pools....

HELP PLZ!!!!



Agreed. Bitmain, update cgminer in your firmware.  Please!  Being able to use these with a proxy would be very helpful.

Yes please, need this update asap Sad

New firmware out!  This includes cgminer 3.8.5-1  Damn that was fast! Shocked

Testing now.
sr. member
Activity: 588
Merit: 250
What do beeps indicate? During that time, the miner reports 0Ghs or similar.
legendary
Activity: 2128
Merit: 1005
ASIC Wannabe
I have four of these and am wondering if I should consider using them for my antminers. There is only one 12v rail in each one though.

http://blog.marxy.org/2012/10/bargain-12v-32a-hp-ps-3381-1c1-power.html

Appreciate a reply cos I have absolutely no experience with power supplies and the like....

32A * 12V is only ~380W. You might be barely able to run a 180GH, and wont be able to overclock
sr. member
Activity: 812
Merit: 250
One rail with enough big cable and a good output is enough, just split to both blades.
sr. member
Activity: 348
Merit: 251
I have four of these and am wondering if I should consider using them for my antminers. There is only one 12v rail in each one though.

http://blog.marxy.org/2012/10/bargain-12v-32a-hp-ps-3381-1c1-power.html

Appreciate a reply cos I have absolutely no experience with power supplies and the like....
Jump to: