Topic: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner - page 85. (Read 452359 times)
My ant says I have avg 195GHs, but BTCguild only shows 150GHs. They were about the same before I overclock. What is the problem? Any body has any idea?
shiunsai,
two antminers on one corsair 750 is a lot... remember you only have 730w at most from the 12v rail.. each antminer should draw 360w without overclocking and 430'ish overclocked.. the most I could get from my corsairs 750 is 3 overclocked antminers running on two 750w corsairs..
for your problem i would suggest doing the following..
reset the miner, run each miner seperately on the 750w corsair.. if each functions fine then you know your problem is the psu wattage..
just my 2cents
two antminers on one corsair 750 is a lot... remember you only have 730w at most from the 12v rail.. each antminer should draw 360w without overclocking and 430'ish overclocked.. the most I could get from my corsairs 750 is 3 overclocked antminers running on two 750w corsairs..
for your problem i would suggest doing the following..
reset the miner, run each miner seperately on the 750w corsair.. if each functions fine then you know your problem is the psu wattage..
just my 2cents
Exactly samsonn25 
I had this problem, mixed and matched one of my pci express cords from a higher PSU to one of the blades being connected with the lower psu, i thought it fixed the ~140ish, but anyone have any idea how to fix this'?
One more question, I have two miners on a 750w corsair, and one miner on a 520w dynex (temporary) once in a while, the miner still, make second long beeps 3-4 seconds apart, green light blinkds, not flashes like when mining. what does this mean? It does not sound like no internet so I do not know Sad
From the temps,I'd say chain 2 is whats slow,get that new PSU...........fast!!!!!!!!!
[/quote
how can you tell its chain two??? alll my chain 2's always say 0 for fan
Because there is no fan on blade 2. Also the low temp on blade 2 might indicate it is not working as hard as it should be, thus the lower hashing power?
Can anyone explain or help me get a higher hash rate for this miner? both my others are ~175
I had this problem, mixed and matched one of my pci express cords from a higher PSU to one of the blades being connected with the lower psu, i thought it fixed the ~140ish, but anyone have any idea how to fix this'?
One more question, I have two miners on a 750w corsair, and one miner on a 520w dynex (temporary) once in a while, the miner still, make second long beeps 3-4 seconds apart, green light blinkds, not flashes like when mining. what does this mean? It does not sound like no internet so I do not know Sad
From the temps,I'd say chain 2 is whats slow,get that new PSU...........fast!!!!!!!!!
[/quote
how can you tell its chain two??? alll my chain 2's always say 0 for fan
Because there is no fan on blade 2. Also the low temp on blade 2 might indicate it is not working as hard as it should be, thus the lower hashing power?
Can anyone explain or help me get a higher hash rate for this miner? both my others are ~175
I had this problem, mixed and matched one of my pci express cords from a higher PSU to one of the blades being connected with the lower psu, i thought it fixed the ~140ish, but anyone have any idea how to fix this'?
One more question, I have two miners on a 750w corsair, and one miner on a 520w dynex (temporary) once in a while, the miner still, make second long beeps 3-4 seconds apart, green light blinkds, not flashes like when mining. what does this mean? It does not sound like no internet so I do not know Sad
From the temps,I'd say chain 2 is whats slow,get that new PSU...........fast!!!!!!!!!
[/quote
how can you tell its chain two??? alll my chain 2's always say 0 for fan
Because there is no fan on blade 2. Also the low temp on blade 2 might indicate it is not working as hard as it should be, thus the lower hashing power?
Can anyone explain or help me get a higher hash rate for this miner? both my others are ~175
I had this problem, mixed and matched one of my pci express cords from a higher PSU to one of the blades being connected with the lower psu, i thought it fixed the ~140ish, but anyone have any idea how to fix this'?
One more question, I have two miners on a 750w corsair, and one miner on a 520w dynex (temporary) once in a while, the miner still, make second long beeps 3-4 seconds apart, green light blinkds, not flashes like when mining. what does this mean? It does not sound like no internet so I do not know Sad
I would just run the main blade to see if it runs at 90GHs on the good PSU, if it does disconnect and run the second blade only on the same good PSU (swap the ribbon cables). If they both run at 90GHs you know it's the PSU if one does not you will have to troubleshoot that blade.
[/quote
Okay word, sounds good and logical to me haha
Can anyone explain or help me get a higher hash rate for this miner? both my others are ~175
I had this problem, mixed and matched one of my pci express cords from a higher PSU to one of the blades being connected with the lower psu, i thought it fixed the ~140ish, but anyone have any idea how to fix this'?
One more question, I have two miners on a 750w corsair, and one miner on a 520w dynex (temporary) once in a while, the miner still, make second long beeps 3-4 seconds apart, green light blinkds, not flashes like when mining. what does this mean? It does not sound like no internet so I do not know Sad
I would just run the main blade to see if it runs at 90GHs on the good PSU, if it does disconnect and run the second blade only on the same good PSU (swap the ribbon cables). If they both run at 90GHs you know it's the PSU if one does not you will have to troubleshoot that blade.
Can anyone explain or help me get a higher hash rate for this miner? both my others are ~175
I had this problem, mixed and matched one of my pci express cords from a higher PSU to one of the blades being connected with the lower psu, i thought it fixed the ~140ish, but anyone have any idea how to fix this'?
One more question, I have two miners on a 750w corsair, and one miner on a 520w dynex (temporary) once in a while, the miner still, make second long beeps 3-4 seconds apart, green light blinkds, not flashes like when mining. what does this mean? It does not sound like no internet so I do not know Sad
From the temps,I'd say chain 2 is whats slow,get that new PSU...........fast!!!!!!!!!
[/quote
how can you tell its chain two??? alll my chain 2's always say 0 for fan
Can anyone explain or help me get a higher hash rate for this miner? both my others are ~175
I had this problem, mixed and matched one of my pci express cords from a higher PSU to one of the blades being connected with the lower psu, i thought it fixed the ~140ish, but anyone have any idea how to fix this'?
One more question, I have two miners on a 750w corsair, and one miner on a 520w dynex (temporary) once in a while, the miner still, make second long beeps 3-4 seconds apart, green light blinkds, not flashes like when mining. what does this mean? It does not sound like no internet so I do not know Sad
From the temps,I'd say chain 2 is whats slow,get that new PSU...........fast!!!!!!!!!
Can anyone explain or help me get a higher hash rate for this miner? both my others are ~175
I had this problem, mixed and matched one of my pci express cords from a higher PSU to one of the blades being connected with the lower psu, i thought it fixed the ~140ish, but anyone have any idea how to fix this'?
One more question, I have two miners on a 750w corsair, and one miner on a 520w dynex (temporary) once in a while, the miner still, make second long beeps 3-4 seconds apart, green light blinkds, not flashes like when mining. what does this mean? It does not sound like no internet so I do not know Sad
hi guys
i ve configured mine but it s keep on rebooting and miners are not starting
solution?
i ve configured mine but it s keep on rebooting and miners are not starting
solution?
witch psu you use??
hey girls...
i have a lot of disaster here with my s1....
today i get my 3 s1...lol but only one run at time..
they run oll together from first tim...then i configured one and the next but...o0
if i will login to 1 s1 then its starts looks like good...ha ha ha..
its come the black screen for start but after them "this site can´t be displayed- try again!"
i remember that the last step i did is , i put in lan settings statik address...so i think and the same on miner 2...llol
if i run netscan, then its show me tis 2 miner with the corrwct ip but i never can connekt!!
how can reset network adapter ore get acces to device to change the settings???
ssh no! i trayed..no chance!
nobody the same problem??
can anybody help please??
push and hold the rest button for 5secs.. you can find the button in the network card interface..
after you reset, you should be able to access the miner through the original settings 192.168.1.99 address..
dont do this for all miners at once, just one at a time and after each one change the ip so the next time you reset any other machine you wont have to deal with the same problem..
wow...
thank you verry much...its works!!
...
I followed your getting started on the pool site.
STRATUM:stratum+tcp://dont include that24.159.196.108
PORT: 3333
...
I followed your getting started on the pool site.
STRATUM:
PORT: 3333
...
^Fixed
It's certainly not a cgminer issue in the original or the ant (corrupted) clone of it ... I've been using stratum like that on my ant for ... a long time.
hi guys
i ve configured mine but it s keep on rebooting and miners are not starting
solution?
i ve configured mine but it s keep on rebooting and miners are not starting
solution?
witch psu you use??
hey girls...
i have a lot of disaster here with my s1....
today i get my 3 s1...lol but only one run at time..
they run oll together from first tim...then i configured one and the next but...o0
if i will login to 1 s1 then its starts looks like good...ha ha ha..
its come the black screen for start but after them "this site can´t be displayed- try again!"
i remember that the last step i did is , i put in lan settings statik address...so i think and the same on miner 2...llol
if i run netscan, then its show me tis 2 miner with the corrwct ip but i never can connekt!!
how can reset network adapter ore get acces to device to change the settings???
ssh no! i trayed..no chance!
nobody the same problem??
can anybody help please??
push and hold the rest button for 5secs.. you can find the button in the network card interface..
after you reset, you should be able to access the miner through the original settings 192.168.1.99 address..
dont do this for all miners at once, just one at a time and after each one change the ip so the next time you reset any other machine you wont have to deal with the same problem..
hi guys
i ve configured mine but it s keep on rebooting and miners are not starting
solution?
i ve configured mine but it s keep on rebooting and miners are not starting
solution?
witch psu you use??
hey girls...
i have a lot of disaster here with my s1....
today i get my 3 s1...lol but only one run at time..
they run oll together from first tim...then i configured one and the next but...o0
if i will login to 1 s1 then its starts looks like good...ha ha ha..
its come the black screen for start but after them "this site can´t be displayed- try again!"
i remember that the last step i did is , i put in lan settings statik address...so i think and the same on miner 2...llol
if i run netscan, then its show me tis 2 miner with the corrwct ip but i never can connekt!!
how can reset network adapter ore get acces to device to change the settings???
ssh no! i trayed..no chance!
nobody the same problem??
can anybody help please??
hey guys,
i have a question/problem regarding my 4 antminers and my mining pool.
So, basically, I'm using Eligius and my shares rewarded keep on dropping over time.. Right now it went from 100% to 79% over less than 36 hours.. (see link for screenshot pic)
I tried rebooting the devices and looking at the miner status and everything looks fine (no x's, less than 0.1% rejection rate and temps are well below 45)..
any idea's what could be going on? i looked at other contributors on my hashing range and they all seem to have significantly higher shares rewarded percentage than me! it sucks to have 20% of my shares vanishing..
any help will be greatly appreciated!
https://www.dropbox.com/s/n9sfm64hamw99i7/Untitled.jpg
i have a question/problem regarding my 4 antminers and my mining pool.
So, basically, I'm using Eligius and my shares rewarded keep on dropping over time.. Right now it went from 100% to 79% over less than 36 hours.. (see link for screenshot pic)
I tried rebooting the devices and looking at the miner status and everything looks fine (no x's, less than 0.1% rejection rate and temps are well below 45)..
any idea's what could be going on? i looked at other contributors on my hashing range and they all seem to have significantly higher shares rewarded percentage than me! it sucks to have 20% of my shares vanishing..
any help will be greatly appreciated!
https://www.dropbox.com/s/n9sfm64hamw99i7/Untitled.jpg
It could be that you are not yet fully "vested" in the pool. It looks like everything is fine to me. I would mine a few more days and see how the numbers look then. Or choose another pool if you don't like the way it feels
thanks for your reply buddy..
so at this rate, or any rate below 92%, would you say that btc guild, after deducting their 5% + 3% fees would be a more rewarding option? i mean since they are using PPLNS scheme.. or is my comparison not accurate?
I've posted this in a few threads in hopes that someone will see it and can help.
I just got hooked my S1 up and trying to get into ninja pool.
I followed your getting started on the pool site.
STRATUM:stratum+tcp://dont include that24.159.196.108
PORT: 3333
Username: Weblogin.Worker
Password: Worker Password
I signed up for an account, added a worker, added payment address. Then went to the ip and added the above info into the antminer hit apply and save.
It doesn't show any activity when I click on miner status page. Do I have to add 3 different pools in the configuration section?
What am I missing?
I have a steady green light under the network cable and a steady red next to that with a blinking green on left. Is this correct?
Any help would be great
edit: opened cgminer added command per the directions here http://24.159.196.108/index.php?page=gettingstarted
. performed reboot.
still nothing.
Edit 2: I screwed up ip so I had to reset. I hope that didn't change anything other than the way it came. eg. firmware.
When it first turns on and it is set to default miner config. the green led on the outside of the box is on. as soon as I set ninja pool it shuts off. and makes a clicking noise trying to start fan but it never starts.
it says Stratum in recommended. Do I have to set that anywhere? I only modified the miner config page. what am I missing?
I just got hooked my S1 up and trying to get into ninja pool.
I followed your getting started on the pool site.
STRATUM:
PORT: 3333
Username: Weblogin.Worker
Password: Worker Password
I signed up for an account, added a worker, added payment address. Then went to the ip and added the above info into the antminer hit apply and save.
It doesn't show any activity when I click on miner status page. Do I have to add 3 different pools in the configuration section?
What am I missing?
I have a steady green light under the network cable and a steady red next to that with a blinking green on left. Is this correct?
Any help would be great
edit: opened cgminer added command per the directions here http://24.159.196.108/index.php?page=gettingstarted
. performed reboot.
still nothing.
Edit 2: I screwed up ip so I had to reset. I hope that didn't change anything other than the way it came. eg. firmware.
When it first turns on and it is set to default miner config. the green led on the outside of the box is on. as soon as I set ninja pool it shuts off. and makes a clicking noise trying to start fan but it never starts.
it says Stratum in recommended. Do I have to set that anywhere? I only modified the miner config page. what am I missing?
^Fixed
Interesting. I have that included in my settings and it works.
hey guys,
i have a question/problem regarding my 4 antminers and my mining pool.
So, basically, I'm using Eligius and my shares rewarded keep on dropping over time.. Right now it went from 100% to 79% over less than 36 hours.. (see link for screenshot pic)
I tried rebooting the devices and looking at the miner status and everything looks fine (no x's, less than 0.1% rejection rate and temps are well below 45)..
any idea's what could be going on? i looked at other contributors on my hashing range and they all seem to have significantly higher shares rewarded percentage than me! it sucks to have 20% of my shares vanishing..
any help will be greatly appreciated!
https://www.dropbox.com/s/n9sfm64hamw99i7/Untitled.jpg
i have a question/problem regarding my 4 antminers and my mining pool.
So, basically, I'm using Eligius and my shares rewarded keep on dropping over time.. Right now it went from 100% to 79% over less than 36 hours.. (see link for screenshot pic)
I tried rebooting the devices and looking at the miner status and everything looks fine (no x's, less than 0.1% rejection rate and temps are well below 45)..
any idea's what could be going on? i looked at other contributors on my hashing range and they all seem to have significantly higher shares rewarded percentage than me! it sucks to have 20% of my shares vanishing..
any help will be greatly appreciated!
https://www.dropbox.com/s/n9sfm64hamw99i7/Untitled.jpg
It could be that you are not yet fully "vested" in the pool. It looks like everything is fine to me. I would mine a few more days and see how the numbers look then. Or choose another pool if you don't like the way it feels
hey guys,
i have a question/problem regarding my 4 antminers and my mining pool.
So, basically, I'm using Eligius and my shares rewarded keep on dropping over time.. Right now it went from 100% to 79% over less than 36 hours.. (see link for screenshot pic)
I tried rebooting the devices and looking at the miner status and everything looks fine (no x's, less than 0.1% rejection rate and temps are well below 45)..
any idea's what could be going on? i looked at other contributors on my hashing range and they all seem to have significantly higher shares rewarded percentage than me! it sucks to have 20% of my shares vanishing..
any help will be greatly appreciated!
https://www.dropbox.com/s/n9sfm64hamw99i7/Untitled.jpg
i have a question/problem regarding my 4 antminers and my mining pool.
So, basically, I'm using Eligius and my shares rewarded keep on dropping over time.. Right now it went from 100% to 79% over less than 36 hours.. (see link for screenshot pic)
I tried rebooting the devices and looking at the miner status and everything looks fine (no x's, less than 0.1% rejection rate and temps are well below 45)..
any idea's what could be going on? i looked at other contributors on my hashing range and they all seem to have significantly higher shares rewarded percentage than me! it sucks to have 20% of my shares vanishing..
any help will be greatly appreciated!
https://www.dropbox.com/s/n9sfm64hamw99i7/Untitled.jpg
hi guys
i ve configured mine but it s keep on rebooting and miners are not starting
solution?
i ve configured mine but it s keep on rebooting and miners are not starting
solution?
witch psu you use??
i dunno wich one is this
it s belonging to one of the guy who is repairing our pcs
http://imgur.com/R4764cn
Wow. I would definately look at another PSU preferable at least a 550W one.
any brand/model/make in mind?
Never heard of this brand but the price is right:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817256071
hi guys
i ve configured mine but it s keep on rebooting and miners are not starting
solution?
i ve configured mine but it s keep on rebooting and miners are not starting
solution?
witch psu you use??
i dunno wich one is this
it s belonging to one of the guy who is repairing our pcs
http://imgur.com/R4764cn
Wow. I would definately look at another PSU preferable at least a 550W one.
any brand/model/make in mind?
hi guys
i ve configured mine but it s keep on rebooting and miners are not starting
solution?
i ve configured mine but it s keep on rebooting and miners are not starting
solution?
witch psu you use??
i dunno wich one is this
it s belonging to one of the guy who is repairing our pcs
http://imgur.com/R4764cn
Wow. I would definately look at another PSU preferable at least a 550W one.
Jump to: