Hey, I have been having a problem with your bot! The custom settings are not clickable for some reason?
As can be seen here:https://i.imgur.com/Oi3OZBn.png
Is there a reason for this? Can it be fixed?
Love the bot btw!
Topic: Seuntjies DiceBot -Multi-Site, multi-strategy betting bot for dice. With Charts! - page 135. (Read 274841 times)
June 15, 2015, 12:25:28 PM
June 15, 2015, 09:19:27 AM
Hello.
Some errors in Alpha 13
As you see Btc profit set to 0.2, but bot ignore it
http://i.gyazo.com/5a7f3083ab95647c1e0ee940ded6e849.png
And the settings from the same other account.
http://i.gyazo.com/18dab8a1edf2b8177714365fc5f05e9b.png
On this image you can see green with mines. I stop bot and start him, then he work good untill the same bugs.
http://i.gyazo.com/9396abedfc144c15d6e43aa416fabefa.png
And, please make the opportunity to bet a percentage of the account size
Some errors in Alpha 13
As you see Btc profit set to 0.2, but bot ignore it
http://i.gyazo.com/5a7f3083ab95647c1e0ee940ded6e849.png
And the settings from the same other account.
http://i.gyazo.com/18dab8a1edf2b8177714365fc5f05e9b.png
On this image you can see green with mines. I stop bot and start him, then he work good untill the same bugs.
http://i.gyazo.com/9396abedfc144c15d6e43aa416fabefa.png
And, please make the opportunity to bet a percentage of the account size
June 15, 2015, 03:18:30 AM
Seuntjie may i know how to setting bot for increase x% for every x rolls?
like if my base bet 100 sat, it will increase by 10% (10 sat) for every 100 losses so on until hit profit then reset from start again
thanks
now i also got error placing bet. Betting stopped
using SD XMR balance showed wrong..my balance should 1.4 xmr but bot show 14000 xmr
like if my base bet 100 sat, it will increase by 10% (10 sat) for every 100 losses so on until hit profit then reset from start again
thanks
now i also got error placing bet. Betting stopped
using SD XMR balance showed wrong..my balance should 1.4 xmr but bot show 14000 xmr
Easiest way is to use the programming mode with a little lua script. There should be a basic one similar to what you want a few pages back in this thread.
I'll take a look at the balance thing for xmr.
Thanks for this bot man its pretty awesome 
My pleasure. Donations are always welcome
bot always get .net error for me idk why :O
Do you have .net 4.5 installed? What does the error say? .net has a lot of error messages for a lot of different things, so ".net error" doesn't say much.
please help me i cant start this bot
you should try pressing continue it would ignor the error and maybe it would run, also you should know that a lot of people think that 999dice is riggedTry disabling zig zag in that version.
or try the newer version: Alpha version (build 13) of Seuntjies Dicebot is available at seuntjie.com/dicebot/dicebot-v3-alpha-b13.zip
June 14, 2015, 11:33:48 AM
please help me i cant start this bot
you should try pressing continue it would ignor the error and maybe it would run, also you should know that a lot of people think that 999dice is rigged June 14, 2015, 11:19:40 AM
please help me i cant start this bot
http://img.prntscr.com/img?url=https://i.imgur.com/zKBJERP.jpg
http://img.prntscr.com/img?url=https://i.imgur.com/zKBJERP.jpg
June 13, 2015, 05:58:17 PM
bot always get .net error for me idk why :O
June 13, 2015, 02:06:46 PM
Thanks for this bot man its pretty awesome
June 12, 2015, 08:10:39 AM
Seuntjie may i know how to setting bot for increase x% for every x rolls?
like if my base bet 100 sat, it will increase by 10% (10 sat) for every 100 losses so on until hit profit then reset from start again
thanks
now i also got error placing bet. Betting stopped
using SD XMR balance showed wrong..my balance should 1.4 xmr but bot show 14000 xmr
like if my base bet 100 sat, it will increase by 10% (10 sat) for every 100 losses so on until hit profit then reset from start again
thanks
now i also got error placing bet. Betting stopped
using SD XMR balance showed wrong..my balance should 1.4 xmr but bot show 14000 xmr
June 10, 2015, 06:26:07 AM
New alpha version released with support added for rollin.io and a log of bug fixes for dadice:
Alpha version (build 13) of Seuntjies Dicebot is available at seuntjie.com/dicebot/dicebot-v3-alpha-b13.zip
Well done seuntijeAlpha version (build 13) of Seuntjies Dicebot is available at seuntjie.com/dicebot/dicebot-v3-alpha-b13.zip
Now it's working very well on Dadice , without stopping , also Balance issue is rectified
Thank you
June 07, 2015, 06:42:50 PM
New alpha version released with support added for rollin.io and a log of bug fixes for dadice:
Alpha version (build 13) of Seuntjies Dicebot is available at seuntjie.com/dicebot/dicebot-v3-alpha-b13.zip
Alpha version (build 13) of Seuntjies Dicebot is available at seuntjie.com/dicebot/dicebot-v3-alpha-b13.zip
June 07, 2015, 06:41:44 PM
HI , am using the bot 1st time at justdice, but few questions for settings
1) In the picture given in forum its showing bets on DOGE but when i open it , in actually its showing CLAM how to play the bot with DOGE
2) How to change the payout 1.98x to 2.00x or higher , reason being when making losses its 100% but when profit loosing 0.02% so ultimately its not covering the loss made .
3) so if my total bets are 4000 and i made profit 1500 bets and lost 2500 bets , then am earning nothing .
Kindly correct me if am wrong and if any one can help me with guidelines for best settings to maximize the profit.
1) In the picture given in forum its showing bets on DOGE but when i open it , in actually its showing CLAM how to play the bot with DOGE
2) How to change the payout 1.98x to 2.00x or higher , reason being when making losses its 100% but when profit loosing 0.02% so ultimately its not covering the loss made .
3) so if my total bets are 4000 and i made profit 1500 bets and lost 2500 bets , then am earning nothing .
Kindly correct me if am wrong and if any one can help me with guidelines for best settings to maximize the profit.
1) The picture on the forum is about a year old and was made when doge-dice was still active. You can't play in doge on just-dice. Also, the version that resembles that picture is nearly 6 months old. You should try the newer version. See below for a link
2) set your chance to the corresponding payout. for a 2x payout, your chance must be 49.5% to win. to calculate what your chance should be, take 99/payout. for example, for a 10x payout, your chance should be set to (99/10)=9.9%
3) this question doesn't make sense. I think you should read up on how the betting strategies work.
The best settings are what works best for you. There is no global best settings.
June 07, 2015, 01:17:37 PM
HI , am using the bot 1st time at justdice, but few questions for settings
1) In the picture given in forum its showing bets on DOGE but when i open it , in actually its showing CLAM how to play the bot with DOGE
2) How to change the payout 1.98x to 2.00x or higher , reason being when making losses its 100% but when profit loosing 0.02% so ultimately its not covering the loss made .
3) so if my total bets are 4000 and i made profit 1500 bets and lost 2500 bets , then am earning nothing .
Kindly correct me if am wrong and if any one can help me with guidelines for best settings to maximize the profit.
1) In the picture given in forum its showing bets on DOGE but when i open it , in actually its showing CLAM how to play the bot with DOGE
2) How to change the payout 1.98x to 2.00x or higher , reason being when making losses its 100% but when profit loosing 0.02% so ultimately its not covering the loss made .
3) so if my total bets are 4000 and i made profit 1500 bets and lost 2500 bets , then am earning nothing .
Kindly correct me if am wrong and if any one can help me with guidelines for best settings to maximize the profit.
June 07, 2015, 04:38:49 AM
Glad you got it working. Sorry I couldn't help you more, I have no idea why your one account didn't work.
It's something glitchy and it happened on a few different accounts. Not sure if it's how I set it up or when I started using it or what but once it's glitched I just had to ditch the account.
I have more questions:
1. Is it possible to reduce the amount of CPU usage consumed by the bot?
2. Is it possible to reduce the amount of bandwidth consumed while using the bot?
The internet Nazis where I live have a terrible idea of what 'normal' bandwidth is and crunch us down to 150 gigs per month for $85. So, I actually put the bot on a VPS and it ran okay there but the CPU usage is over 50% so I couldn't run more than one bot without it getting hectic and even crashing sometimes.
edit: when running on PD it's consuming close to 1GB of data per day.
It might be something to do with your password. If you have any non utf-8 characters in your password, you won't be able to log in with the bot.
as for your questions:
1. I tested cpu usage and the highest cpu usage I got was 2% at PRC. PD was around 1.5% and JD was just below 1%. Most of the time is spent waiting for a response from the server. Of course a higher betting speed means higher cpu usage, but I cant see it going above about 2.5%.
2. Bet less or reduce the betting speed using the bot speed setting. The bot communicates purely in post data and json with the sites, so no, there's no way to reduce the data usage. The bot sends and receives data constantly while betting, it's almost like downloading a file.
2.1: You can edit the source and disable the chat at primedice. That should reduce data consumption somewhat
If you run more than one instance from the same directory, it's likely the bot will crash. Both bots will try to write to and read from the same database file for the bets, and that could cause some issues. It's more likely that this is causing the bots to crash than the cpu usage.
June 07, 2015, 03:16:07 AM
Glad you got it working. Sorry I couldn't help you more, I have no idea why your one account didn't work.
It's something glitchy and it happened on a few different accounts. Not sure if it's how I set it up or when I started using it or what but once it's glitched I just had to ditch the account.
I have more questions:
1. Is it possible to reduce the amount of CPU usage consumed by the bot?
2. Is it possible to reduce the amount of bandwidth consumed while using the bot?
The internet Nazis where I live have a terrible idea of what 'normal' bandwidth is and crunch us down to 150 gigs per month for $85. So, I actually put the bot on a VPS and it ran okay there but the CPU usage is over 50% so I couldn't run more than one bot without it getting hectic and even crashing sometimes.
edit: when running on PD it's consuming close to 1GB of data per day.
June 05, 2015, 07:22:19 PM
Glad you got it working. Sorry I couldn't help you more, I have no idea why your one account didn't work.
June 02, 2015, 08:38:50 PM
seuntjie, thanks again for replying. My internet connection is stable and fast (50 Mb/s). I'm not using a vpn. JD works fine in v2.5 but I haven't been able to get it to work with any of the v3 versions and I've tried them all and I've tested on two different computers and with a VPN and without a VPN.
PD works great in v3_build6 and it really makes me wish I could see JD work too because of how smooth and less interruptions. The nonce count is nice too. Not sure if the nonce count is visible in JD like it is in PD but that's a really nice feature you put in there.
No one else out there having problems connecting to JD in the v3 bot? Is there debug I could run in programming mode to learn more about the issue? Does JD use a different port in v3 compared to v2.5 that may be getting blocked in my firewall? But... I'm pretty sure I tried disabling my firewall too. idk, may try that again.
btw... I promise I will tip seuntjie but it will be a few months until I get back on my feet. I tipped two other guys that helped me but I'm a fool with my money I guess so I have to wait for it to build up again. seuntjie's bot is way more awesome... just wish I could get my JD issue figured out.
PD works great in v3_build6 and it really makes me wish I could see JD work too because of how smooth and less interruptions. The nonce count is nice too. Not sure if the nonce count is visible in JD like it is in PD but that's a really nice feature you put in there.
No one else out there having problems connecting to JD in the v3 bot? Is there debug I could run in programming mode to learn more about the issue? Does JD use a different port in v3 compared to v2.5 that may be getting blocked in my firewall? But... I'm pretty sure I tried disabling my firewall too. idk, may try that again.
btw... I promise I will tip seuntjie but it will be a few months until I get back on my feet. I tipped two other guys that helped me but I'm a fool with my money I guess so I have to wait for it to build up again. seuntjie's bot is way more awesome... just wish I could get my JD issue figured out.
It's very odd that you can't connect to JD. Have you tried the latest build of the bot (build 12)? I recently updated the API the bot uses to connect to JD to make it a bit more stable, so maybe that works. And yes, the bot communicates on a fundamentally different way with the sites in v3 from v2, but it still uses https, it won't get blocked by your firewall as long as you can browse the internet. Unfortunately there is no debug you can run at this time.
The only issue I can think of is that it for some odd reason tries to connect to doge-dice instead of JD, but you would need to have changed some of the code for that to happen. If you haven't yet, try build 12 and see if that works better. I'm sorry you're having these issues.
Alpha version (build 12) of Seuntjies Dicebot is available at seuntjie.com/dicebot/dicebot-v3-alpha-b12.zip
Hi again. Yes, I've been trying mostly build 12 and most recently build 12 but have also tried various v3 builds. What is Doge-Dice? Doge-Dice is not an option in the build12 that I have and I just downloaded it from the link you provided. I have not changed any of the code. But I have tried this:
I just downloaded build12 into a completely neutral environment (VPS) and tried it again and it gave the exact same results as what I see on my two local home computers. So maybe the fact that I don't see "Doge-Dice" in the version I'm running is a problem? Did the wrong file get uploaded? Thanks again for trying.
edit: I just double-checked the "about" from the B12 I just DL'd and it says "vs 3.0 Alpha build 12" so that seems like it would be the latest correct version.
edit: It finally worked!!! I don't know what happened... just started working. OMG yay!!! sorry about all that. Thx!!!
edit: Okay, so the issue was with the account. I just transferred balance to a new account and it works fine
June 02, 2015, 02:40:41 AM
Dear Seuntije
when will you solve Dadice problems? I mean balance problem and stopping after while
when will you solve Dadice problems? I mean balance problem and stopping after while
Well i haven't experienced the stopping problem, but I'm working on it. Should be soon
https://bitcointalksearch.org/topic/m.11457061
That should be fixed in the next build yes.
seuntjie, thanks again for replying. My internet connection is stable and fast (50 Mb/s). I'm not using a vpn. JD works fine in v2.5 but I haven't been able to get it to work with any of the v3 versions and I've tried them all and I've tested on two different computers and with a VPN and without a VPN.
PD works great in v3_build6 and it really makes me wish I could see JD work too because of how smooth and less interruptions. The nonce count is nice too. Not sure if the nonce count is visible in JD like it is in PD but that's a really nice feature you put in there.
No one else out there having problems connecting to JD in the v3 bot? Is there debug I could run in programming mode to learn more about the issue? Does JD use a different port in v3 compared to v2.5 that may be getting blocked in my firewall? But... I'm pretty sure I tried disabling my firewall too. idk, may try that again.
btw... I promise I will tip seuntjie but it will be a few months until I get back on my feet. I tipped two other guys that helped me but I'm a fool with my money I guess so I have to wait for it to build up again. seuntjie's bot is way more awesome... just wish I could get my JD issue figured out.
PD works great in v3_build6 and it really makes me wish I could see JD work too because of how smooth and less interruptions. The nonce count is nice too. Not sure if the nonce count is visible in JD like it is in PD but that's a really nice feature you put in there.
No one else out there having problems connecting to JD in the v3 bot? Is there debug I could run in programming mode to learn more about the issue? Does JD use a different port in v3 compared to v2.5 that may be getting blocked in my firewall? But... I'm pretty sure I tried disabling my firewall too. idk, may try that again.
btw... I promise I will tip seuntjie but it will be a few months until I get back on my feet. I tipped two other guys that helped me but I'm a fool with my money I guess so I have to wait for it to build up again. seuntjie's bot is way more awesome... just wish I could get my JD issue figured out.
It's very odd that you can't connect to JD. Have you tried the latest build of the bot (build 12)? I recently updated the API the bot uses to connect to JD to make it a bit more stable, so maybe that works. And yes, the bot communicates on a fundamentally different way with the sites in v3 from v2, but it still uses https, it won't get blocked by your firewall as long as you can browse the internet. Unfortunately there is no debug you can run at this time.
The only issue I can think of is that it for some odd reason tries to connect to doge-dice instead of JD, but you would need to have changed some of the code for that to happen. If you haven't yet, try build 12 and see if that works better. I'm sorry you're having these issues.
Alpha version (build 12) of Seuntjies Dicebot is available at seuntjie.com/dicebot/dicebot-v3-alpha-b12.zip
June 01, 2015, 11:00:02 PM
I've tried rebooting and tried on a Win 7 64 bit and a Win 8 64 bit computer but JD just won't work for me in the v3. Any other site gives a fast reply on the login but the JD login seems to freeze for a minute and then give an error.
It will work in v2.5 but the problem in v2.5 is that it frequently hangs and the seed refresh seems like it takes a long time.
Is there any debug to run for v3 to see what it's doing when I try to login to JD?
Don't 999 and JD use similar API? The login content for the .cs files are very different between the cs files but I have no idea what to do with those files. I was able to open them in MS Visual Studio Express and that's about the extent of my programming talent.
Not sure if this helps but this is from the jdcapilog.txt file:
5/30/2015 7:41:38 AM 1::
5/30/2015 7:41:48 AM caught!The operation has timed out
5/30/2015 7:41:58 AM caught!The operation has timed out
5/30/2015 7:42:08 AM caught!The operation has timed out
5/30/2015 7:42:18 AM caught!The operation has timed out
5/30/2015 7:42:28 AM caught!The operation has timed out
5/30/2015 7:43:07 AM 1::
5/30/2015 7:43:17 AM caught!The operation has timed out
5/30/2015 7:43:27 AM caught!The operation has timed out
5/30/2015 7:43:37 AM caught!The operation has timed out
5/30/2015 7:43:47 AM caught!The operation has timed out
5/30/2015 7:43:57 AM caught!The operation has timed out
5/30/2015 7:45:36 AM 1::
5/30/2015 7:45:46 AM caught!The operation has timed out
5/30/2015 7:45:56 AM caught!The operation has timed out
5/30/2015 7:46:06 AM caught!The operation has timed out
5/30/2015 7:46:16 AM caught!The operation has timed out
5/30/2015 7:46:26 AM caught!The operation has timed out
5/30/2015 7:47:34 AM 1::
5/30/2015 7:47:44 AM caught!The operation has timed out
5/30/2015 7:47:54 AM caught!The operation has timed out
5/30/2015 7:48:04 AM caught!The operation has timed out
5/30/2015 7:48:14 AM caught!The operation has timed out
5/30/2015 7:48:24 AM caught!The operation has timed out
5/30/2015 8:28:47 AM 1::
5/30/2015 8:28:57 AM caught!The operation has timed out
5/30/2015 8:29:07 AM caught!The operation has timed out
5/30/2015 8:29:17 AM caught!The operation has timed out
5/30/2015 8:29:27 AM caught!The operation has timed out
5/30/2015 8:29:37 AM caught!The operation has timed out
It will work in v2.5 but the problem in v2.5 is that it frequently hangs and the seed refresh seems like it takes a long time.
Is there any debug to run for v3 to see what it's doing when I try to login to JD?
Don't 999 and JD use similar API? The login content for the .cs files are very different between the cs files but I have no idea what to do with those files. I was able to open them in MS Visual Studio Express and that's about the extent of my programming talent.
Not sure if this helps but this is from the jdcapilog.txt file:
Code:
5/30/2015 7:41:38 AM 1::
5/30/2015 7:41:48 AM caught!The operation has timed out
5/30/2015 7:41:58 AM caught!The operation has timed out
5/30/2015 7:42:08 AM caught!The operation has timed out
5/30/2015 7:42:18 AM caught!The operation has timed out
5/30/2015 7:42:28 AM caught!The operation has timed out
5/30/2015 7:43:07 AM 1::
5/30/2015 7:43:17 AM caught!The operation has timed out
5/30/2015 7:43:27 AM caught!The operation has timed out
5/30/2015 7:43:37 AM caught!The operation has timed out
5/30/2015 7:43:47 AM caught!The operation has timed out
5/30/2015 7:43:57 AM caught!The operation has timed out
5/30/2015 7:45:36 AM 1::
5/30/2015 7:45:46 AM caught!The operation has timed out
5/30/2015 7:45:56 AM caught!The operation has timed out
5/30/2015 7:46:06 AM caught!The operation has timed out
5/30/2015 7:46:16 AM caught!The operation has timed out
5/30/2015 7:46:26 AM caught!The operation has timed out
5/30/2015 7:47:34 AM 1::
5/30/2015 7:47:44 AM caught!The operation has timed out
5/30/2015 7:47:54 AM caught!The operation has timed out
5/30/2015 7:48:04 AM caught!The operation has timed out
5/30/2015 7:48:14 AM caught!The operation has timed out
5/30/2015 7:48:24 AM caught!The operation has timed out
5/30/2015 8:28:47 AM 1::
5/30/2015 8:28:57 AM caught!The operation has timed out
5/30/2015 8:29:07 AM caught!The operation has timed out
5/30/2015 8:29:17 AM caught!The operation has timed out
5/30/2015 8:29:27 AM caught!The operation has timed out
5/30/2015 8:29:37 AM caught!The operation has timed out
the 999dice and JD api's aren't even close. They're nothing alike.
It looks like the api has problems connecting to the site. Is your internet connection stable and how fast is it? If you're using a vpn, try connecting without it or using another one.
I tested connecting with the 2fa and was able to connect without a problem.
seuntjie, thanks again for replying. My internet connection is stable and fast (50 Mb/s). I'm not using a vpn. JD works fine in v2.5 but I haven't been able to get it to work with any of the v3 versions and I've tried them all and I've tested on two different computers and with a VPN and without a VPN.
PD works great in v3_build6 and it really makes me wish I could see JD work too because of how smooth and less interruptions. The nonce count is nice too. Not sure if the nonce count is visible in JD like it is in PD but that's a really nice feature you put in there.
No one else out there having problems connecting to JD in the v3 bot? Is there debug I could run in programming mode to learn more about the issue? Does JD use a different port in v3 compared to v2.5 that may be getting blocked in my firewall? But... I'm pretty sure I tried disabling my firewall too. idk, may try that again.
btw... I promise I will tip seuntjie but it will be a few months until I get back on my feet. I tipped two other guys that helped me but I'm a fool with my money I guess so I have to wait for it to build up again. seuntjie's bot is way more awesome... just wish I could get my JD issue figured out.
June 01, 2015, 07:42:06 AM
Dear Seuntije
when will you solve Dadice problems? I mean balance problem and stopping after while
when will you solve Dadice problems? I mean balance problem and stopping after while
Well i haven't experienced the stopping problem, but I'm working on it. Should be soon
https://bitcointalksearch.org/topic/m.11457061
June 01, 2015, 06:06:43 AM
Dear Seuntije
when will you solve Dadice problems? I mean balance problem and stopping after while
when will you solve Dadice problems? I mean balance problem and stopping after while
Well i haven't experienced the stopping problem, but I'm working on it. Should be soon
Jump to: