Topic: Sidehack stick solo pool club - page 4. (Read 27253 times)

I just slipped in 2 or so Gh/s to my stickname  (maybe a high estimate) because i wanted to run my drillbit thumb for a while.
Ha, how many of you know what a drillbit thumb is.
I trust you understand I'm not asking how many of you don't give a darn, I can figure that for myself.
 

27 active members


1)   philipma1957donation                
1A) philipma1957sticks            
1B) philipma1957s7                


2)   edonkeystick                    

3)  VirosaGITSdonation        
3A) VirosaGITSstick              

4) notlist3dstick                      

5)   larry12stick                    
5A) larry12s5donation              

6)   vapourminerstick            

7)   fullzerostick                                  

8 )  Jake36stick                    

9)   TheRealStevestick  
        
10)  alienesbstick                  

11)   Chris_Sabianstick            

12)   Ecnadstick      12) ecnadstick   12a) ecnaddonate                

13)   bmoscatosticks              

14)   mikestangstick              

15)   baktegonStick                

16)   slimepuppysticks          
16A) slimepuppydonation      

17)   peptostick                                    

18)   kipper01                    

19)   valkirstick                  
19A) valkirdonation
                
20)   sidehackdonatedstick  

21) sloopystick

22) aarons6

23)HerbPeanStick ------

24) therocks36Stick --

25) FinksySticks      

26) alh

27) Meech



test list for TheRealSteve






Beta test ends OCT 11th-------


Remember this first 30 days is beta test.  If we get crazy lucky and hit  we all get an equal share.  

So the donators like myself are being good to stick buyers.  Guys running 1 stick will get as much as guys running two sticks.
I am running a donation and a stick and maybe 1/3 the hash.  I am only taking 1 share.











I will donate 5th of hash a day in the form of a rental from nice hash.  I will spend 0.011 btc each day which is about 4 to 6 hours of bonus hash on the pool each day. I will run this bonus hash for 30 days and see how it stands after 30 days.

Remember most likely this pool club will never hit a block.

The master user addy is this.


http://solo.ckpool.org/users/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX


Current workers are here:

1)    http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.philipma1957donation
1A)   http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.philipma1957sticks  

2)  http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.edonkeystick

3)    http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.VirosaGITSdonation
3A) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.VirosaGITSstick

4)    http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.notlist3dstick

5)   http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.larry12stick
5.A) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.larry12s5donation

6) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.vapourminerstick

7) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.fullzerostick


8 )  http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Jake36stick

9 )  http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.TheRealStevestick

10) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.alienesbstick

11) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Chris_Sabianstick

 12) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.ecnadstick
12A) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.ecnaddonate

13) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.bmoscatosticks

14) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.mikestangstick

15) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.baktegonStick




16) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.slimepuppysticks
16A) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.slimepuppydonation  


17) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.peptostick

18) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.kipper01


19)
 http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.valkirstick  
19A)   http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.valkirdonation


20)

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.sidehackdonatedstick  

21)

http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.sloopysticks


22) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.aarons6

23) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.HerbPeanStick

24) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.therocks36stick


25) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.FinksySticks

26) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.alhstick

27) http://solo.ckpool.org/workers/1JiWuyX94wrCr7JhkAn7x5qNMCEef1KhqX.Meechstick

please check for completeness.


Just clicked all of us and slimepuppy + larry = offline

thus 25 shares as of wed the 7th

I don't know that this addresses what you're saying. I recently had a 20 minute whole house power failure. When it came back on, I deliberately did nothing just to see what my RPI Cgminer-Gekko setup would do. The pi restarted, the sticks restarted, minera restarted (or never went away ). It may have taken another twenty minutes for things to get back to where they were, but they did. And probably would have done it faster if I put a suggested share difficulty in there instead of waiting for that first 1K to get things moving.

From someone who has never used a RPI, I am immensely impressed with it's ability to free me from my pc while mining 24/7. Of course we do the same thing with antminers and such when our blood is running hot, but for sticks this cannot be beat. And you edonkey are going to remain a hero to me for some time for your iteration of Minera/Cgminer-Gekko.  It's absolutely sweet.

As an alternative, Minera automatically starts your miner. You can optionally specify a number of seconds to delay after boot, if that's interesting.

It also supports automatically restarting if the miner software crashes (which I've never seen with cgminer-gekko), or restarting if N number of units goes non-responding (again, never needed to use this with the sticks).

Minera also has a pretty GUI, if you like that

Easiest way is edit the /etc/rc.local (if your using raspbian) and add (just above the exit 0)

cd /home/pi "or whatever you used"/cgminer-gekko
sudo ./cgminer -o pool -u user --compac-freq xxx  what ever else you want

And it'll start mining as soon as it boot's.

Mine is back up.   Appears electricity was lost on RPI.  It rebooted but sit there with no miners.  So my average is lower today but should be fixed now.

Now need to find a scrypt to do run it automatically so does not happen again.

Well, I guess you could call it confused if you mean I read what someone wrote and then applied what they wrote and determined they were wrong.  

So yes, now I see that Phil's post was in error with the "%" mention, that clears it up, carry on.  

I do      .55 x 125 =               68.75



  why?  it is the least amount of keys to enter on a calculator.



I then type in freq = 6.875gh in the chart.  just moving the decimal place cause I know a stick cant do 68.75

Technically   entering

.055 x 125 = 6.875  is  correct   but it is not faster and the chart has  10 plus entries.

My bad since I did not explain it exactly.


 

Yes you're right. It wasn't intentional, but an oversight on my part that workers' best share doesn't reset along with the rest. Might not be such a bad thing...

EDIT: No, the worker best share does reset, as that code was there from before. It's only the share count that never resets, and that applies to users and workers.

ty just bought it

I think you're mildly confused   Phil's list is fine, but mentioned 55%, which is incorrect.  I said "multiplier is 55", that's not a percentage

100MHz * 55h/Hz = 5500Mh/s or 5.5Gh/s.  No extra step there, and no oddball percentage "divide by 100, multiply by 5.5 (aka percentages), then go from Mega to Giga by just substituting strings"

I used to feel the same way. Even through best share is basically a meaningless statistic, it does give you a sense that something is happening.

By default, my monitoring script will sent an email if any of the monitored addresses have an improved best share. The last best share is stored in a file locally, so it doesn't matter if the pool resets it or not.

When I was just monitoring my own addresses, this was cool because I'd get an email once in a while. But now that I monitor all of the club's addresses, I was getting a ton of best share emails. It was really too much so I disabled monitoring of best shares for now.

Now all I see is when someone (anyone) solves a block on CK's solo pool. So far it's always been someone else.

But where there's hash, there's hope

The only concern I have with resetting one's best share with each block solve is that I will never know if luck is a true thing.
If my sticks never solve anything ever for years, yea I know, come on what are you expecting, if I saw a best share of mine that was even in the ballpark I would hope that you would share my excitement.

You're adding an extra step or two to make 55% work, no need to mess around with 1000MHz = 1GH/s conversion like you did..  If you look at the list Phil posted earlier, which I've quoted and editted below, you take the frequency and multiply by 0.055 (5.5%) you get the hash in GH/s.

It's not showing that high of a share because it reset at some point, probably after a solo solve yesterday?  But if ck says worker best share does not reset then I don't know how else to explain the discrepancy.

this is mine


http://www.amazon.com/DROK-Multimeter-Capacity-Charging-Alignment/dp/B00J3JSEG6/ref=sr_1_3?ie=UTF8&qid=1444231956&sr=8-3&keywords=usb+meter

these search terms will yield many such devices: USB Meter or USB Tester
e.g. http://www.amazon.com/s/ref=nb_sb_noss_2?url=search-alias%3Daps&field-keywords=usb+meter
There's basic models like the 7-segment ones, slightly fancier ones like that white one with the LCD (I've got one of those) and somewhat expensive but feature-riddled ones.

Oh perfect, saved it for later! Thanks Phil!

in one of your Picture not shown here  i saw a USB thingie with digital numbers on it what was that i want one.

Dentally?  Well I suppose he did sink his teeth into it

I initially suggested it because of the relative ease of adding workers, rather than having to assign individual addresses etc.  Helps that ck (and kano) are very responsive

---

The ASIC's clock -> Gh/s multiplier is 55.  100MHz * 55 = 5500MHz -> 5.5Gh/s
So 5.5% is correct..albeit off by a factor 1,000

---

Maybe the /users/ one gets reset, but /worker/ does not?  ck might have to answer that.  Right now FinksySticks doesn't show nearly that high of a best share.

The bot (ignoring resets) reports:

Top club best shares: valkirstick (891,953,402) philipma1957sticks (216,364,341) fullzerostick (191,610,039) FinksySticks (65,558,032) bmoscatosticks (49,883,780)
Top donator best shares: philipma1957donation (2,366,037,588) philipma1957s7 (1,305,528,734) slimepuppydonation (176,899,661) aarons6 (82,192,528) larry12s5donation (49,990,406)

I think you mean 5.5% of frequency?  Checking the math it comes out to 5.5 at least.