SILENTARMY v5: Zcash miner, 115 sol/s on R9 Nano, 70 sol/s on GTX 1070 - page 43.

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: Stealth8368 on November 13, 2016, 06:36:34 PM

If open source mining software is going to work and keep up with other fee paying mining software we must show support,I suggest with next release everyone mines to the developers zcash address for first hour at lest and show support for the great work.

been dong it

.

laik2

sr. member

Activity: 652

Merit: 266

Quote from: joblo on November 13, 2016, 06:31:26 PM

Quote from: scryptr on November 13, 2016, 05:55:15 PM

Quote from: laik2 on November 13, 2016, 03:02:31 PM

Just put 2 more RX480 and started getting this:

Quote

[ 327.726578] VM fault (0x02, vmid 2) at page 1641426, read from 'TC4' (0x54433400) (72)
[ 327.726582] amdgpu 0000:03:00.0: GPU fault detected: 147 0x07c84802
[ 327.726597] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001A82F1
[ 327.726613] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002
[ 327.726629] VM fault (0x02, vmid 2) at page 1737457, read from 'TC4' (0x54433400) (72)
[ 327.726634] amdgpu 0000:03:00.0: GPU fault detected: 147 0x01484802
[ 327.726648] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x0017865A
[ 327.726664] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002
[ 327.726680] VM fault (0x02, vmid 2) at page 1541722, read from 'TC4' (0x54433400) (72)
[ 327.726684] amdgpu 0000:03:00.0: GPU fault detected: 147 0x08304802
[ 327.727325] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001BCEF3
[ 327.727865] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002
[ 327.728406] VM fault (0x02, vmid 2) at page 1822451, read from 'TC4' (0x54433400) (72)
[ 327.728411] amdgpu 0000:03:00.0: GPU fault detected: 147 0x07d04802
[ 327.728943] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001B280A
[ 327.729472] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04044002
[ 327.729998] VM fault (0x02, vmid 2) at page 1779722, read from 'TC5' (0x54433500) (68)

I've installed some old powered PCIe risers which are non usb/nor original asrocks but cards are recognized.
Additional power to the motherboard H81 Pro BTC is not installed...may that be the problem?
It's not so often but a few times every 10mins... and mostly doesn't seem to stop mining unless it completely freezes.

ASROCK STATES THAT THE TWO MOLEX POWER CONNECTIONS MUST BE USED--

The auxilliary mollex power connecters are not an option, according to the manual. I know board chat goes either way, but non-powered ribbon risers are dangerous and flammable. --scryptr

The on board power connectors shouldn't be an issue because powered risers don't draw any power from the mobo.
It doesn't mean it's not a power issue. If your PSU is multi rail make sure the distribution is balanced.

Is it same GPU every time? Intermittant nature suggests a bad connection, ie bad riser.

Bad riser...both risers I found do that...some old shitty risers...damn cards came before new risers and I can't use my brand new rx480s...

Stealth8368

sr. member

Activity: 347

Merit: 255

If open source mining software is going to work and keep up with other fee paying mining software we must show support,I suggest with next release everyone mines to the developers zcash address for first hour at lest and show support for the great work.

nrg_wolf

legendary

Activity: 882

Merit: 1000

only 30sols on a 1060, does not seem right. what are others getting?

joblo

legendary

Activity: 1470

Merit: 1114

Quote from: scryptr on November 13, 2016, 05:55:15 PM

Quote from: laik2 on November 13, 2016, 03:02:31 PM

Just put 2 more RX480 and started getting this:

Quote

[ 327.726578] VM fault (0x02, vmid 2) at page 1641426, read from 'TC4' (0x54433400) (72)
[ 327.726582] amdgpu 0000:03:00.0: GPU fault detected: 147 0x07c84802
[ 327.726597] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001A82F1
[ 327.726613] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002
[ 327.726629] VM fault (0x02, vmid 2) at page 1737457, read from 'TC4' (0x54433400) (72)
[ 327.726634] amdgpu 0000:03:00.0: GPU fault detected: 147 0x01484802
[ 327.726648] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x0017865A
[ 327.726664] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002
[ 327.726680] VM fault (0x02, vmid 2) at page 1541722, read from 'TC4' (0x54433400) (72)
[ 327.726684] amdgpu 0000:03:00.0: GPU fault detected: 147 0x08304802
[ 327.727325] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001BCEF3
[ 327.727865] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002
[ 327.728406] VM fault (0x02, vmid 2) at page 1822451, read from 'TC4' (0x54433400) (72)
[ 327.728411] amdgpu 0000:03:00.0: GPU fault detected: 147 0x07d04802
[ 327.728943] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001B280A
[ 327.729472] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04044002
[ 327.729998] VM fault (0x02, vmid 2) at page 1779722, read from 'TC5' (0x54433500) (68)

I've installed some old powered PCIe risers which are non usb/nor original asrocks but cards are recognized.
Additional power to the motherboard H81 Pro BTC is not installed...may that be the problem?
It's not so often but a few times every 10mins... and mostly doesn't seem to stop mining unless it completely freezes.

ASROCK STATES THAT THE TWO MOLEX POWER CONNECTIONS MUST BE USED--

The auxilliary mollex power connecters are not an option, according to the manual. I know board chat goes either way, but non-powered ribbon risers are dangerous and flammable. --scryptr

The on board power connectors shouldn't be an issue because powered risers don't draw any power from the mobo.
It doesn't mean it's not a power issue. If your PSU is multi rail make sure the distribution is balanced.

Is it same GPU every time? Intermittant nature suggests a bad connection, ie bad riser.

scryptr

legendary

Activity: 1797

Merit: 1028

Quote from: laik2 on November 13, 2016, 03:02:31 PM

Just put 2 more RX480 and started getting this:

Quote

[ 327.726578] VM fault (0x02, vmid 2) at page 1641426, read from 'TC4' (0x54433400) (72)
[ 327.726582] amdgpu 0000:03:00.0: GPU fault detected: 147 0x07c84802
[ 327.726597] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001A82F1
[ 327.726613] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002
[ 327.726629] VM fault (0x02, vmid 2) at page 1737457, read from 'TC4' (0x54433400) (72)
[ 327.726634] amdgpu 0000:03:00.0: GPU fault detected: 147 0x01484802
[ 327.726648] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x0017865A
[ 327.726664] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002
[ 327.726680] VM fault (0x02, vmid 2) at page 1541722, read from 'TC4' (0x54433400) (72)
[ 327.726684] amdgpu 0000:03:00.0: GPU fault detected: 147 0x08304802
[ 327.727325] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001BCEF3
[ 327.727865] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002
[ 327.728406] VM fault (0x02, vmid 2) at page 1822451, read from 'TC4' (0x54433400) (72)
[ 327.728411] amdgpu 0000:03:00.0: GPU fault detected: 147 0x07d04802
[ 327.728943] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001B280A
[ 327.729472] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04044002
[ 327.729998] VM fault (0x02, vmid 2) at page 1779722, read from 'TC5' (0x54433500) (68)

I've installed some old powered PCIe risers which are non usb/nor original asrocks but cards are recognized.
Additional power to the motherboard H81 Pro BTC is not installed...may that be the problem?
It's not so often but a few times every 10mins... and mostly doesn't seem to stop mining unless it completely freezes.

ASROCK STATES THAT THE TWO MOLEX POWER CONNECTIONS MUST BE USED--

The auxilliary mollex power connecters are not an option, according to the manual. I know board chat goes either way, but non-powered ribbon risers are dangerous and flammable. --scryptr

laik2

sr. member

Activity: 652

Merit: 266

Quote from: nerdralph on November 13, 2016, 05:45:07 PM

Quote from: laik2 on November 13, 2016, 05:28:36 PM

Quote from: nerdralph on November 13, 2016, 05:24:16 PM

With the Linux binary releases I make I also included a "mine" script that will mine to my mph account. I just checked the balance, and it's .0035 ZEC, or ~42c. Who says open-source software work doesn't pay. :-)

I'm mining with single core to mrb's account for a few days, post your address and I'll put another core for yours

'nerdralph' is my miningpoolhub account, or with a different pool use: t1MaD62DS2bbzxCuZHnkB8g5Yc2wbeT1g9z
Thanks in advance. Not that I need the money, but it's nice to know when someone likes the work enough to make a small donation.

cpuminer -l eu1-zcash.flypool.org:3333 -u t1MaD62DS2bbzxCuZHnkB8g5Yc2wbeT1g9z.laik2 -t 1 Done

jk_14

legendary

Activity: 1292

Merit: 1000

Quote from: jk_14 on November 13, 2016, 04:17:15 AM

Quote from: mrb on November 12, 2016, 10:33:33 PM

Quote from: jk_14 on November 12, 2016, 08:25:30 PM

Hi, mrb

Could you implement some very usefull, ccminer-like option: -S --syslog

-S, --syslog use system log for output messages

that would be nice for KopiemTu support, i.e. for monitoring

It's low priority, but I will consider it. In the mean time I am happy to accept patches from contributors.

Ok, that is my patch, then

Code:

root@kopiemtu:~# diff /opt/miners/silentarmy/silentarmy silentarmy.orig
13d12
< import syslog
266,271c265
<
< if self.opts.syslog:
< syslog.syslog("Total %s sol/s [%s] %d share%s" % \
< (rate_avg, info_gpus, shares, '' if shares == 1 else 's'))
< else:
< print("Total %s sol/s [%s] %d share%s" % \
---
> print("Total %s sol/s [%s] %d share%s" % \
273c267
< sys.stdout.flush()
---
> sys.stdout.flush()
401,402d394
< if self.opts.syslog:
< print('\nNow logging to syslog...')
404,405d395
<
<
566,569d555
< parser.add_option(
< "--syslog",
< dest="syslog", action="store_true",
< help="use system log for output messages")
root@kopiemtu:~#

whole modified file:
http://www.mbl.cash/silentarmy

Please apply it, thanks!

I have KopiemTu monitoring done for your miner (a bit of testing now)
In case you would expand the shares printout, please keep the format: 99/100 (99.00%)

Thanks in advance.

nerdralph

sr. member

Activity: 588

Merit: 251

Quote from: laik2 on November 13, 2016, 05:28:36 PM

Quote from: nerdralph on November 13, 2016, 05:24:16 PM

With the Linux binary releases I make I also included a "mine" script that will mine to my mph account. I just checked the balance, and it's .0035 ZEC, or ~42c. Who says open-source software work doesn't pay. :-)

I'm mining with single core to mrb's account for a few days, post your address and I'll put another core for yours

'nerdralph' is my miningpoolhub account, or with a different pool use: t1MaD62DS2bbzxCuZHnkB8g5Yc2wbeT1g9z
Thanks in advance. Not that I need the money, but it's nice to know when someone likes the work enough to make a small donation.

qwep1

hero member

Activity: 610

Merit: 500

Quote from: anatolikostis on November 13, 2016, 05:34:28 PM

Quote from: sp_ on November 13, 2016, 04:54:26 PM

With modded straps (claymore 5.0a):

this is nothing without gpu MHz Cheesy

1150-1200 o more?

anatolikostis

legendary

Activity: 2026

Merit: 1005

Quote from: sp_ on November 13, 2016, 04:54:26 PM

With modded straps (claymore 5.0a):

this is nothing without gpu MHz Cheesy

1150-1200 or more?

laik2

sr. member

Activity: 652

Merit: 266

Quote from: nerdralph on November 13, 2016, 05:24:16 PM

With the Linux binary releases I make I also included a "mine" script that will mine to my mph account. I just checked the balance, and it's .0035 ZEC, or ~42c. Who says open-source software work doesn't pay. :-)

I'm mining with single core to mrb's account for a few days, post your address and I'll put another core for yours

nerdralph

sr. member

Activity: 588

Merit: 251

With the Linux binary releases I make I also included a "mine" script that will mine to my mph account. I just checked the balance, and it's .0035 ZEC, or ~42c. Who says open-source software work doesn't pay. :-)

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: doktor83 on November 13, 2016, 04:54:15 PM

my old 270 (not X) card give almost 60 sol/s.
r9 380 4gb is about 72 sol/s

hugeeeee improvement.
mrb and guys, do your magic Grin

they will i think there all ready working it from one of the post but it might be a while i sure hope Zec mining stays for long while with all the hard work every one is putting in to it .

sp_

legendary

Activity: 2926

Merit: 1087

Team Black developer

With modded straps (claymore 5.0a):

doktor83

hero member

Activity: 2548

Merit: 626

my old 270 (not X) card give almost 60 sol/s.
r9 380 4gb is about 72 sol/s

hugeeeee improvement.
mrb and guys, do your magic Grin

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: doktor83 on November 13, 2016, 04:32:32 PM

claymore did it again, time for payback

did what i haven't followed him sense this went windows .nm I see v5 i guess it's faster I'll won't comment on, i keep it to my self let some one else go there .

but at 2.5 % fee hint ,!!!

wow one 470

Total Speed: 115.515 H/s, Total Shares: 3, Rejected: 0, Time: 00:00

doktor83

hero member

Activity: 2548

Merit: 626

claymore did it again, time for payback

adamvp

hero member

Activity: 1246

Merit: 708

what to o/c in rx 470 and rx 480 to get more s/s
gpu or memory?

jakobito

newbie

Activity: 7

Merit: 0

Quote from: hagie on November 13, 2016, 03:10:04 PM

Quote from: jakobito on November 13, 2016, 02:01:58 PM

Quote from: hagie on November 13, 2016, 10:39:11 AM

Quote from: krnlx on November 13, 2016, 09:21:37 AM

Made a cuda port of actual Silentarmy 5

speeds sucks. 92 s/s on overclocked 1070(opencl version give near 100)

Tested only on linux.

If anyone want

https://github.com/krnlx/nheqminer

too bad it dumped :

Code:

~/aaa/nheqminer/Linux_cmake/nheqminer_cuda_sa$ ./nheqminer_cuda_sa -l eu1-zcash.flypool.org:3333 -u t1M74VKHZDJnHwmwWiHUiMWkBkzgQW4VGeg -cv 0 -cs -cd 0 -t 0

==================== www.nicehash.com ====================
Equihash CPU&GPU Miner for NiceHash vSA5 cuda port by maztheman,krnlx
Thanks to Zcash developers for providing base of the code.
Special thanks to tromp, xenoncat, mbevand
and eXtremal-ik7 for providing
optimized CPU, CUDA and AMD equihash solvers.
==================== www.nicehash.com ====================

Setting log level to 2
[15:36:43][0x00007f8b99409780] Using SSE2: YES
[15:36:43][0x00007f8b99409780] Using AVX: YES
[15:36:43][0x00007f8b99409780] Using AVX2: NO
[15:36:43][0x00007f8b96069700] stratum | Starting miner
[15:36:43][0x00007f8b96069700] stratum | Connecting to stratum server eu1-zcash.flypool.org:3333
[15:36:43][0x00007f8b95868700] miner#0 | Starting thread #0 (CUDA-SILENTARMY) GRID K520 (#0) BLOCKS=56, THREADS=64
[15:36:43][0x00007f8b96069700] stratum | Connected!
[15:36:43][0x00007f8b96069700] stratum | Subscribed to stratum server
[15:36:43][0x00007f8b96069700] miner | Extranonce is d65d009971
[15:36:43][0x00007f8b96069700] stratum | Authorized worker t1M74VKHZDJnHwmwWiHUiMWkBkzgQW4VGeg
[15:36:43][0x00007f8b96069700] stratum | Target set to 004189374bc6a7ef9db22d0e5604189374bc6a7ef9db22d0e5604189374bc6a7
[15:36:44][0x00007f8b96069700] stratum | Received new job #c1bc667ea1f4a9aea140
Segmentation fault (core dumped)

But it's not the fault of your port - it's the same with the plain nheqminer 0.4b and the cuda_tromp solver. maybe again bad luck with the old computing (30) version.

Regards

Try adding some flags in CMakeLists.txt for older compute capabilities 3.5 or 5.0. For 750Ti i solved it adding 5.0 flags:

set(CUDA_NVCC_FLAGS ${CUDA_NVCC_FLAGS};; -gencode arch=compute_50,code=sm_50;-gencode arch=compute_52,code=sm_52; -gencode arch=compute_61,code=sm_61 )

afaik the compute version is detected and used - definitions to use 3.0 are in the CMakeList ..

It still dumps - must be something different ..

regards

In krnlx repository the cmakelists.txt file has been modified. For 750ti cards i had to modify it.

https://github.com/nicehash/nheqminer/blob/master/Linux_cmake/nheqminer_cuda_tromp/CMakeLists.txt, line 37:

set(CUDA_NVCC_FLAGS ${CUDA_NVCC_FLAGS};; -gencode arch=compute_20,code=sm_21; -gencode arch=compute_30,code=sm_30; -gencode arch=compute_35,code=sm_35; -gencode arch=compute_50,code=sm_50; -gencode arch=compute_52,code=sm_52; -gencode arch=compute_61,code=sm_61 )

https://github.com/krnlx/nheqminer/blob/master/Linux_cmake/nheqminer_cuda_sa/CMakeLists.txt, line 37:

set(CUDA_NVCC_FLAGS ${CUDA_NVCC_FLAGS};; -gencode arch=compute_52,code=sm_52; -gencode arch=compute_61,code=sm_61 )

Topic: SILENTARMY v5: Zcash miner, 115 sol/s on R9 Nano, 70 sol/s on GTX 1070 - page 43. (Read 209309 times)