Topic: SMOS Linux 3.0.14 Plug-In & Mine - Stability, security and performance - page 4. (Read 94609 times)

Hi i have 4 - Radion R9 270 925M
and one Sapphire Radeon HD 7990
any suggest for config file?

Thank You!

Yes he's not writing anything here since long time...
It's a pity cause it's the best Linux distro for mining as ever!
The new PIMP is not bad but SMOS is much much better...
Hoping he won't stop to support it... and hope he's working for a new ver...
Scrypt is over for GPU and lot of new algos r coming out... we need support to make them running under SMOS...
Blake256 is a good example how much promising new algos can be for all gpu's owners... but it doesn't run under SMOS...

Nobody any intrest in SMOS?

What happened? Everybody back on Windows?

I am still having problems with vertminer and with keccak too.

Since the Gridseedattack and the horrible power costs with about 45 cent per kwh, I cant make money with only scrypt mining.

Please help.

For Verminer I changed config " scrypt " into " nscrypt"

But it did not work.

THX.

+1

I think vertcoin supported miner with automated script should be added to website ...

Hey I just switched over to 1.3 cuz I was having problems getting sgminer to work on 1.2 but now I'm having a problem with one of my GPU's.
I have 1 6850 and 1 r9 290x
The 290x will appear to drop out while I'm monitoring on the webpage and the hashrate and temperature graphs show that it drops in and out. It's not overheating temp is around 70 celcius.
While writing this I just went into ssh to look at the cgminer using screen -r and it appears that my card is working fine. I am getting HUGE fluctuations in Hashrate though, it goes from around 850 down to 785 and anywhere in between just while I'm watching. I never had this happen on 1.2 and never had it happen on windows. My hashrate was also 890 with these settings on windows but I read that SMOS and windows can have different optimal settings. Here is my conf just FYI :
{
"pools" : [
       {
                "url" : "stratum+tcp://usa.cryptotrain.net:3347",
                "user" : "",
                "pass" : "x"
        }
],
"api-listen" : true,
"intensity" : "17,20",
"vectors" : "1,1",
"worksize" : "256,512",
"kernel" : "scrypt,scrypt",
"temp-cutoff" : "95,95",
"temp-overheat" : "85,85",
"temp-target" : "75,75",
"expiry" : "120",
"gpu-dyninterval" : "7",
"log" : "5",
"queue" : "1",
"retry-pause" : "5",
"scan-time" : "30",
"scrypt" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"shaders" : "0,0",
"thread-concurrency" : "3840,32765",
"gpu-thread" : "2,1",
"lookup-gap" : "0,2",
"gpu-fan" : "0-75,0-70",
"gpu-engine" : "875,929",
"gpu-memclock" : "1050,1500",
"gpu-powertune" : "0,30"
}

Hello everybody,

I need a little help.

I want to use Vertminer in SMOS.
What do I have to change in my config?

Had a lttle crash without changing it. Tryed to mine some Rotocoins:-)

Thanks for your advice.

Any idea when the website will be back up?

Greets!

Do things that are available in the Tip section also work on LTCRabbit?

http://www.smos-linux.org/tips/

Is everything basically the same except its built for LTCRabbit pool??

Do the upgrades work as well?

http://www.smos-linux.org/upgrades/

Thanks

it removes the current cgminer and folder


now using cryptoslax 64 bit

if i run

wget http://www.smos-linux.org/upgrade/keccak.sh
chmod +x keccak.sh
./keccak.sh

Do i than have cgminer 3.7.2 & cgminer keccak or do this replace the cgminer i'm using now.

thanks

I have a problem with my 3 rigs (each of them has 6x sapphire r9 270x). When I turn the rig on, everything works well. But 1, 2 or 4 hours later, one card slows down (from 480 khs to 70-90khs. It is about 10 kh less per 1-2 minutes or less. Look at the picture http://i59.tinypic.com/10gya1v.png ). 5-10 hours later, the whole rig stops working (I don't have access via http, only via putty, but the rig doesn't mine)

It appears in three separated rigs (Mobo: Msi Z77A-G45, 4gb ddr3, 2x corsair cs 650M, powered risers). I tried to disconnect that card, but it is the same (the only difference is that another card slows down). When I plug only one card, nothing changes.


I use SMOS linux 1.3 (+ v4 upgrade)

Scrypt: http://www.smos-linux.org/cfg/sapphire.270x

I also tried to do the last tip:

For 6 cards, error with boot, error with start X

1. You have problem with more then 3,4,5 cards, or you cant boot SMOS. This is solution. Turn off your rig by command halt. After your rig turns off, plugout USB. When you plugout USB, plugin USB on windows machine. Open SMOS label, and goes to the syslinux folder. You will see file named live.cfg, delete it. And DOWNLOAD it file from here (DOWNLOAD name is linked), extract it, and put it in the folder.


Up till now, nothing has helped. In addition - my rigs with 6x r9 280x or r9 290 works perfeclty.


Where is the problem?
Thank you in advance

My coplex scrypt based on above + added some more features https://bitcointalk.org/index.php?topic=508355.new#new

I'm running SMOS great atm, but just scrypt.

Anyone can tell me how i can easily mine scrypt-jane, vertcoin, scrypt-n, ...?
I love the automatism and hope it's still possible to archive if i want to mine something non-scrypt.
Just turn the system on and it runs what i've put in the webinterface Cgminer Config.

I use this script https://bitcointalksearch.org/topic/i-made-an-auto-coldrebooter-script-for-bamtsmos-490840 and it actually works pretty well.

watch out, ALWAYS DISCONNECT INTERNET with these images...

they auto start with settings and theyr own workers.....

almost fried my card, as i coudnt get it to stop... ALWAYS RECOMPILE SOURCE since it's pretty shady to autostart miner with theyr account.... i woudnt trust this crap with a 50 foot pole


#1 bins are in /opt/cgminer/ something
#2 killall -9 cgminer will kill processs
#3 killall -9 screen will kill the screen.

#4 i had hard time to find the process, it's harder then orig bamt, why ?

#5 you can also screen in and type 'q' , ctrl-a-x to get inside screen..

#6 when i have time ill fork this to a SAFE version that doesnt auto start, and MOTD showing where important files are,
maybe an auto mound of usb keys for configs you could bring in.


actually just saw in this version you can access config in README / CONFIG dirs on usb prior to boot..

STILL  SHould be NOOC DEFAULT and a nice MOTD SAYING how to make it autostart... like chkconfig mine on

Can anyone tell me how I can monitor my rigs to auto reboot if a GPU hangs? I see the option in the bamt.config file but next to it it says (phoenix only) wtf is phoenix???

Any Closer to an 64 bit release

with N factors increasing , needing more then 4 Gig system RAM

i probably made a mistake first time but now work fine thank's.


are u using crontab -e? or u try to access with the file manager?